SPL REPAIR TO TOILET BLOCK IN MT AREA, TOILET, BATHROOM BLOCK OF JCOS, PROVN OF CURTAIN ROD TO 24 NOS GIRLS BARRACK, P-01 TO P-11 BLOCK DGNCC AND PROVN OF MES COMPLAINT CELL, STORE ROOM AND GARBAGE PIT (03 NOS) AT CAMP AREA CPG UNDER GE (EAST) DELHI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.

S & F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S & F 125mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges to PVC frames with reqd nos of screws complete all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 150mm size Mild steel oval shape handles complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm bore graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 300x450x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over and incl 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path including demolition/dismantling of existing tiles of any type complete all as specified and as directed.

M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and incl 15mm thick screed bed in CM 1:6 including demolition of existing flooring or tiles of any type and size complete all as specified and as directed (Note: Colour of chequered tiles shallbe approved by Engr-in-Charge or by GE as per site requirement).

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 including dismantling of existing steel work of any type complete all as specified and directed

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed.

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.

S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)

S & F in repairs 15mm Angle valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed.

S & F in repairs cast copper alloy Chromium plated Angle valve 15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.

S & F in repairs 75mm dia brass chromium plated shower rose with neck and swivel joints fancy type with shower armof 450mm long suitable for 15mm bore GI pipe all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab in repairs, complete all as specified and as directed. (Make: Cera/Parryware/Hindware)

S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe, trap set in and including concrete etc complete including and good to floor all as specified and dirtected. (Make: Cera/Parryware/Hindware)

S & F in repair vitreous china pedastal pattern water closet (EWC) including flush pipe & seat cover 'P' or 'S' trap including Jet spray and Health faucet complete all as specified and directed. (Make: Cera/Parryware/Hindware)

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed.(Make : Jaquar or equivalent in Cera/Parryware)

S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.

S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for RCC M25 design Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.

M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .

S & F in repairs 100mm bore Cast iron soil (Sand cast), waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.

S & F in repairs 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S & F in repairs 100mm bore cast iron cowls complete all as specified and as directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius complete

S & F in repairs 100mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

S & F for factory made Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing manhole covers complete all as specified and as directed.

Taking out exisitng roof treatment with any type of membrane, wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation etc, and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped and drying the cleaned surface for further treatment, complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement including a mix of water proofing compound @ 200ml/50Kg Cement Bag (Smartcare vitalia of Asian Paint product or equivalent of Berger and Nerolac), complete all as specified and as directed. (Note : Cost of water proofing compound shall deemed to include in the quoted rate).

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac). Notes:(1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty over new surfaces complete all as specified and as directed.

M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

S & F Stainless Steel Curtain Rod 20mm dia as per required length at site over Door/Window/Ventilator complete all as specified and as directed.

S & F designer/fancy type Stainless Steel curtain rod holder, type and pattern as approved by Engr-in-Charge or GE fixed to curtain rods complete all as specified and directed.

S & F designer type Stainless Steel curtain rod bracket, type and pattern as approved by Engr-in-Charge or GE fixed with rawl plug and screws to wall complete all as specified and directed.

M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for Hard core of gauge exc 63mm but not exc 100mm deposited spread and leveling in layers n exc 15cm thick watred and raming to a true surface complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

All as per srl item No 60 here-in-before but bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in footings, plinth beam and bases of columns complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in beams,lintle/plinth bands cantilevers, bressumers, lintel over 1.5m clear span supported on walls complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in columns , piers posts and struts complete all as specified and as directed.

M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6mmean radius complete all as specified and as directed.

M&L Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

M&L Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed.

S & F Mild steel framed work as in grills, gratings etc, with end of bars shouldered and or riveted forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar works, complete conforming to Fe 290 Gde E-165, including dismantling of existing grills of any type complete all as specified and directed.

M & L 20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding complete all as specified and as directed.

M & L for coloured vetrified tiles of size 600 x 600 x 8-10mm thick as in floor over and incl 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6,complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4, complete all as specified and as directed.

S & F 15mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 20mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete.

S & F Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F 15mm bore Angle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.(Make: Jaquar/Marc/Kohler)

S & F 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, complete all as specified and as directed.

S & F CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed.

S & F full pedestal pattern wash hand basin, size of basin 630x510 mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting taking down existing wash hand basin of any type and size complete all as specified and as directed.(Make: Cera/Parryware/Hindware)

S&F 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.

S & F wall mounter multiple function Shower panel including all fittings and fixtures as per product code make Jaquar/Hindware description below :- (a) Item Product code 511686 (Size-1650mmx150mmx550mm) - Make-Hindware. (b) Item Product code JPL-SSF-ST88148B. (Size-1600mmx 200mm)- Make-Jaquar. (c) Item Product Code JPL-WHT-TMCURVENEO. (Size-1500mmx230mm)-Make-Jaquar

S & F in repairs Wall mixer 3-in-1 system (L-bend) with provision for overhead shower complete with 115mm long bend pipe connecting legs and over head shower with all fittings and fixtures complete all as specified. (Make : Jaquar/Marc/Kohler)

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or as in spout, complete all as specified and as directed.

S & F Stack clamps out of 50 mmx 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for bore of pipe 100mm complete.

S & F 110mm PVC (SWR) vent cowl complete.

S & F 110mm PVC (SWR) Bend complete.

M&L PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and as directed.

M & L for Plain cement concrete 1:2:4 type B- 1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, Sides of interlocking/chequired tiles filling, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator , socket, light fittings etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through existing PVC conduit including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl new MS box and 3mm thick plastic laminated sheet of suitable sizes for mounting switches/sockets/fan regulator etc , and making good surface as original complete all as directed for the following:-

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

All as per srl item no. 02 here-in-before but with 2.5 sqmm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire .

M&L in for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with Bakellite sheet 3mm thik suitable for fixing switches/sockets/fan regulator etc complete all as directed for the following :-

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

All as per srl item No. 131 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire

S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F for switch piano, flush type single pole, one way 15 Amp complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Complete all as specified and as directed

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 63 Amp, SPN type with over load and short circuit protection complete all as directed.

Supply and fixing of isolator 40 Amp, SPN type with over load and short circuit protection complete all as directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn into and incl PVC conduit with all fittings and 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, complete all as specified.

S&F of Geyser 25 litre (5 Star rating as per BEE) capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet water connection upto stop cock(excluding stop cock) complete all as specifed and as directed.

S&F of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing in replacement LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.

All as per srl item No 149 here-in-before but except in replacement.

Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.

All as per srl item No 151 here-in-before but except in replacement.

S&F ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.

S & F of Exhaust fan 300 mm sweep metal type, DB incuding self closing louver and making all electric connections complete and depositing the old u/s to DGNCC store yard complete all as specified and as directed .

Supply and fixing in replacement of LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

All as per srl item No 155 here-in-before but except in replacement.

Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 32 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

All as per srl item No 157 here-in-before but except in replacement.

Taking out old unserviceable LT U/G cable any size and core.complete all as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F in replacement of LED bulk head fitting made of cast aluminium alloy with opal glass diffuser , complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete and depositing the old u/s to DGNCC store yard .Complete all as specified and as directed

S&F in replacement of change over switch off load type, AC, 415Volts, TPN, 63 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6.3 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection from top of the plate up to test point.

VIKRANT CONSTRUCTION CO.

M/s Shubh Enterprises

Akhil Enterprises

M/S GEETANJALI ENTERPRISES

Vipul Construction