Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-Finance | ₹2.5 L | L1 | Accepted-Finance Responsive |
| 2 | L2₹2.7 LAccepted-Finance | ₹2.7 L | L2 | Accepted-Finance Responsive |
| 3 | L3₹2.9 LAccepted-Finance | ₹2.9 L | L3 | Accepted-Finance Responsive |
Tender Value
Refer Docs
EMD Value
₹5,751
Closing Date
6 Apr 2026, 3:00 pmClosed
Executive Engineer,CD-I, A.P.W.D., SVP
Executive Engineer,CD-I, A.P.W.D., SVP
Repair and Renovation of Storage Godown 50 MT including Painting Civil Supply Unit at Shaheed Dweep under CD-I, A.P.W.D., Sri Vijaya Puram
2026_APWD_22564_1
60/NIT/DB/CD-I/SVP/25-26
Open Tender
Civil Works - Buildings
60 days
Swaraj Dweep
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹5,751
18 Apr 2026
31 Mar 2026
6 Apr 2026
31 Mar 2026
6 Apr 2026
31 Mar 2026
31 Mar 2026 - 2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | ||||||
| 1.1 | All kinds of soil. | 1.33 | cum | - | - | 2 |
| 2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | ||||||
| 2.1 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - | 4 |
| 2.2 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.42 | cum | - | - | 5 |
| 3Centering and shuttering including strutting, propping etc. and removal of form for | ||||||
| 3.1 | Foundations, footings, bases of columns, etc. for mass concrete | 2.45 | sqm | - | - | 7 |
| 4Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | ||||||
| 4.1 | 30 mm thick plain PVC door shutters | 3.57 | sqm | - | - | 9 |
| 5Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | ||||||
stage.html
html • 0.04 MB
technical_23906.pdf
techsummary_23906.pdf
finance_23906.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Tendernotice_2.pdf
PDF • 23.60 MB
Tenderdocgodown.pdf
Tender Documents • 23.59 MB
BOQ_23906.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid