MAINT/SOPD-G/2025-26/34

1_Improvement of road from Geramari GP Office to 117 no. Jhaleralga Ayushman Arogya Mandir via Fazile more Bazar (Ch. From 0.00 m to 1500.00 m_Heavy dressing of the existing road including dressing high spots, filling low spots and making up loss of material/irregularities, removing of all vegetation, cambering, watering, rolling with 8 to 10 tonne roller to obtain a specified compaction etc. to obtain a uniform formation surface with cross fall from the road centre line to the outer shoulder edge with allowance, made for required quantity of shoulder materials to remain in place to contain the new gravel layer. Works to be carried out in accordance with Technical Specification and as directed by the Engineer.

Gravel/Soil-Aggregregate surface course (table 400.3) Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Providing and fixing of typical PMGSY informatory sign board with logo as per MORD soecifications and drawing .Three MS plates of 1.6mm thick ,top and middile plate duly welded with MS flat iron 25x5mm size on back edges .The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm .The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos .75mmx75mm of 12SWG Sheet tubes posts duly embedded in cement concrete M15 grade blocks of 450mmx450mmx600mm,600mm below ground level.The top most diamond plate will be welded to middile plate by 47mmx47mmof 12SWG steel tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted wityh primer and two coats epoxy paint as per drawing clause 1701 and annexure 1700.1

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I) Private Land

2_Improvement of Road from Fazile more Bazar to Baghmara J.B. School_Ch. 0.00 m to 1230.00 m_Heavy dressing of the existing road including dressing high spots, filling low spots and making up loss of material/irregularities, removing of all vegetation, cambering, watering, rolling with 8 to 10 tonne roller to obtain a specified compaction etc. to obtain a uniform formation surface with cross fall from the road centre line to the outer shoulder edge with allowance, made for required quantity of shoulder materials to remain in place to contain the new gravel layer. Works to be carried out in accordance with Technical Specification and as directed by the Engineer.

Gravel/Soil-Aggregregate surface course (table 400.3) Construction of granular surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Providing and fixing of typical PMGSY informatory sign board with logo as per MORD soecifications and drawing .Three MS plates of 1.6mm thick ,top and middile plate duly welded with MS flat iron 25x5mm size on back edges .The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm .The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos .75mmx75mm of 12SWG Sheet tubes posts duly embedded in cement concrete M15 grade blocks of 450mmx450mmx600mm,600mm below ground level.The top most diamond plate will be welded to middile plate by 47mmx47mmof 12SWG steel tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted wityh primer and two coats epoxy paint as per drawing clause 1701 and annexure 1700.1

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I) Private Land