8622 PROVISION OF FOUR WHEELER PARKING SHED AT NURSING OFFRS MESS OF AICTS PROVISION OF AIR CONDITIONERS IN TRAINING HALL AT PCDA(O) SHIFTING OF SERVER ROOM TO THE FIRST FLOOR AT PCDA(O) ADDITION ALTERATION OF EXISTIN UNDER AGE BR I OF GE S PUNE

Amount

Surface excavation in any type of soil n.exc. 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Dismantling of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed

M&L for precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

M&L for laying moorum / red bajri filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and well ramming including watering, complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces even & rough to receive floor finishes, including necessary form work complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

S&F roof sheeting pre-painted galvalume aluminium zinc coating 150 gms Gl based corrugated Sqm steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for 50 mm thick PCC 1:2:4 type B-0 (Using 12.5 mm size graded stone aggregate) as in floor finished even and smooth and make spike rolling to surface or making impression of expanded metal complete all as specified and directed

Removing of building / demolished materials & debries etc. to a distance of 4 to 5 Km beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for opening of all the existing failed protection provided over the crumple joint in old structure, filling of additional bituminous filler board, 30 cm wide over the existing joint by an appropriate size of polypropylene rod in entire joint, application of primer on both sides of the joints. Filling two part epoxy based polysulphide followed by application of EPDM membrane as protective cover complete all as per manufacturer's instructions and as directed by Engr-in-charge. Note : - The work shall be carried out on top of roof ie. height up to 12m therefore, the cost of all safety measures and transportation of materials etc shall be deemed to be included in unit quoted rates.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for POP false ceiling two or more layers (Rectangular / oval / rounded) design with 12mm thick glass fibre reinforced gypsum ceiling tiles of prima fine fissured micro look, white coloured, laid over including grid work 600x600mm using Gl powder coated "T" section grid (Silhaute type) as Main 'T' 38 X25 mm, cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm die Gl suspension wire etc including over a coat of 1-2 mm thick POP finish complete all as specified and directed. Make-Saint-Gobain / Armstrono / Diamond

M&L for decorative POP cornices / moulding of pattern as per approved by Engr-in-Charge of cross section area exc. 13 Sqcm and n.exc. 25 Sqcm and fixed including preparation of surface and applying two coats of luster paint over a coat of primer matching with the colour of ceiling complete all as directed by Engineer-in-Charge

M&L for aluminium powder coated partition using following sections of 'Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side pre-laminated particle board, interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed, with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue, fixing to stone masonry walls with & including Ist class hard wood teak plugs of 20mmX20mm at an interval of 0.5m alround the track including drilling holes etc. complete as all as specified directed by Engr-in-charge (a). SP-20048 (b). DP-20047 (c) Glazing clips 19352

S&F of anodised aluminium powder coated frame for doors, with one or more rebates using JINDAL section 20078 A-101.60 B-44.45 C-2.01, D-8 weight 1.605 Kg /Rm including joining cleat for fixing etc. complete all as specified and directed.

S&F of aluminium powder coated single leaf door on pivots along with door lock, handles, including 5mm thick glass panel etc fixed with rubber beading and glazing clips and using following powder coated sections conforming to catalogue of 'JINDAL' or equivalent make complete all as specified and directed by Engr-in-charge:- (a) Rectangular tube-14005 (b) Shutter vertical-19518 (c) Shutter top rail-19582 (d) Shutter middle rail-19564 (e) Shutter bottom rail-19511 (f). Glazing clip- 19352

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge :- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F double action floor spring spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main boady with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F of false flooring, EB panel, 600x600x33 mm, top 1mm ASHP laminate 800 grade with top performance finish of HPL with edges protective PVC beading and under structure suitable for FFH 250 mm including galvanized steel zink electroplated pedestal base with stringers and substructure assembly shall be anchored to the floor with suitably fastener or adhesive complete all as directed by Engr-in-charge.

M&L for complete removal of existing treatment and applying two coats of luster paint white or tinted on walls including with internal 1mm thick wall care putty complete all as specified and directed

Taking down / cutting of steel windows shutter by means of gas cutter with out disturbing of sofit / jambs / cills etc of any description n. exc. 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

M&L for glazed coloured digital printed ceramic tiles of size 600x300x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 15 mm thick rendering as in backing coat in CM 1:4 including triangular filleting in CM 1:4 on top edges including taking down of existing tiles and backing coat of any description and removal of debries & demolished materials complete all as specified and directed

M&L for 20mm thick Granite (of any type / colour) work (table rubbed and polished) as in steps, pillars; window cills / jamb, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid over and including 20mm thick screed bed in Cement Mortar (1:4) complete all as specified and directed

Rounding of edges of granite stone slabs, as in steps, plateform or other situations complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.

S&F vitreous china wash basin white flat back of size 580mmx450mm (for Hospital use) including 32mm dia CP waste coupling long screw, chain and plug and PVC waste pipe including CI brackets of suitable size etc. complete all as specified and directed

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc, complete all as specified and directed.

M&L for cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches / under floor or fixed to wall or ceilings, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (When open) 30mm, complete all as specified and directed.

S&F of 18/19 mm thick Block board, grade I quality exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in cupboards or partition or shelf and other similar works complete all as specified and as directed

S&F of magnet catches and striking plate, complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

S&F PVC (SWR) gully trap 125x110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F 100mm size stainless steel handle suitable for kitchen cabinet and drawer complete all as specified and directed

S&F in repair Sink Cock with swinging casted spout with aerator conforming to CAT No. SQN - 522KN of Jaquar or equivalent cat part in makes specified here in after, complete all as specified and directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F 100 mm dia Stainless steel, CP Grating with waste hole complete all as directed.

S&F in repairs PVC flexible waste pipe 32/40mm bore of suitable length, suitable for WHB or Sink, complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

M&L for IInd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams, stair case, landing, chhajas and similar suspended work including reinforced cut on required to facilitate complete all as specified and directed.

M&L for RCC type B1, 1:2:4 (Using 20 mm graded crushed stone aggregate) as in slab supports on wall, beams and column baloconies, shelves and as like works complete all as specified and directed

M&L for form to concrete to sides and soffits of floor or roof beams, beam haunchings, girders, brressummers, lintels, cantilevers, shalves / slabs etc including supports, over hanges etc. also splays between floors and beams, rough finish surface complete all as specified and directed

M&L for mild steel structural steel work, framed as in trusses, purlins, rafter, post etc, conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed

M&L for 450mm bore reinforced concrete pipes, class NP3, laid and jointed complete with cement joints, complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar or cement lime mortar depth of embeded portion of hold fasts or lugs measured from the face of the jamb into the wall cutting exc. half brick but n. exc. one brick and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

M&L for two coats white wash on new plastered surfaces of wall including preparation of new surfaces, complete as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete , complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete (Post holes) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drain, complete all as specified and directed.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or stone or concrete surfaces, finished even smooth without using extra cement duly mixed with integral water proofing compound as per manufacturer’s instructions complete all as specified and directed Note :- WPC shall be measured & paid separately under respective item.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 with finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling finished fair and even without using extra cement complete all as specified and as directed

M&L for cement concrete 1:2:4, type BO, (Using 12.5 mm size graded stone aggregate), as in roof kerbs rounded chamfered on edges, in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses copings kneelers, apex including weathering, slightly rounded or chamfered angles and throating including necessary form work etc complete all as specified and directed

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying 2 coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and as directed

M&L for preparation of new plastered surface of wall and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms / litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed

M&L for complete removal of existing treatment from old wall plaster surface and applying one coats of distemper oil emulsion over and including 3 mm thick wall care putty complete all as specified and directed

M&L for 40 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces even & smooth using extra cement to receive floor finishes, complete all as specified and directed.

Supply & Installation of 5 layers volleyball synthetic flooring, pressure wash the entire court, first layer- acrylic concrete primer, second and third layer - acrylic resurfacer, fourth and fifth layer-UV top color and marking- according to the game all weather synthetic surface (ITF certified) complete all as specified and directed by Engr-in-Charge

Supply & Installation of 150mm dia Mild Steel pipe Works as in posts including embedding in concrete including cutting drilling bolting, welding etc complete all as specified and directed by Engr-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade, as in floors / pavements, laid over & including 30mm thick stone dust cushioning, complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in concrete, in layers n. exc. 25 cm and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed. Note:- Concrete shall be measured and paid separately.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cables, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft /loose soil, complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying of cables, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in hard / dense soil, complete all as specified and directed.

Excavation in over areas, n.exc. 1.50m deep and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed

Removing excavated material exc. 50m but n. exc. 250 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multi-standard copper conductor cable (FRLSH) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable (FRLSH) for earth continuity wire to be drawn through concealed PVC conduit heavy duty ISI marked with its accessories including necessary modular metal flush box, modular white cover plate for fixing switches, sockets, fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light / CB point controlled by one switch, complete all as specified and as directed

All as per item No 79 above but for one socket outlet 3/2 pin, 5 Amp, point on independent board, complete all as specified and as directed

All as per item No 79 above but for one socket outlet 3/2 pin, 5 Amp, point on same board, complete all as specified and as directed

All as per item no 79 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amps socket point, complete all as specified and directed.

All as per item no 79 here-in-before but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amps socket point, complete all as specified and directed.

Supply & fixing modular switch, 1 way, 6 Amps, 1 module complete all as specified and directed.

Supply & fixing modular switch, 1 way, 16 Amps, 1 module complete all as specified and directed.

S & F modular Socket, 6A - 2/3 pin combined 2 module complete all as specified

S & F modular Socket, 6/16A - 2/3 pin combined 2 module complete all as specified

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories incluidng cutting chasing in wall / ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed for the following :- (a) One light point controlled by one way switch 5 Amps

(b) One fan/ ex fan point controlled by one way switch 5 Amps.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No 88 above but for modular socket power point but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S & F of celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked ccomplete all as specified and as directed

S & F of modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make:- Philips/ Havells / Wipro / Bajaj

M & L for copper tubing, confirming to relevant IS of size 5/8” & 3/8" flare size or nearest size as required at site for connecting outdoor and indoor unit gas system with and including 4 core 6 sqmm copper cable, PVC drain pipe of suitable dia and insulation with superlon insulation to copper tubing of required length from indoor to outdoor unit of split AC, complete as directed by Engineer in charge. Note:- Both inlet and outlet copper tubing with insulation, copper cable and PVC drain pipe will be measured as one RM for payment purpose.

Supply and fixing of voltage stabilizer, automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130 volts to 250 volts without put voltage stabilized at 230 volts with accuracy of +2.5% and capacity 5 KVA suitable for 2.0 TR AC complete all as specified and directed. Make- V Guard VG500, Volina, voltas, micro tech

Supplying and Installation, commissioning and testing of wall mounted split AC units of outdoor & indoor of capacity 1.5 TR , 5 star rated and EER 3.2 with built in air ionizer & plasma filter for better indoor air quality with cordless remote control unit, copper condenser coil, complete all as specified and directed. Make- Blue star / Godrej / Voltas / Daikin.

S & F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket complete with one double pole MCB 20 Amp, 240 volts, complete all as specified and as directed.

S & F in repair of Sheet metal 20 amp Single pole and neutral enclosure concealed in wall/wall mounted with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series, 240 V complete all as specified and as directed.

S&F LED batten suitable for indoor application 20 W, 4' length, wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge Make:- Philips/ Havells / Wipro / Bajaj

S&F of recess mounted low glare LED panel light of 2'X2 size, 36 watt white / warm white suitable for Armstrong / grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed, Make:- Philips/ Havells / Wipro / Bajaj

S&F PVC / XLPE insulated, UV resistant AC copper cable of 4x16 Sqmm, 1.1 Kv rated, including suitable copper lugs, screws, nuts & bolts, washers, cable ties etc complete all as specified and directed

Supply and laying XLPE insulated, armoured, heavy duty electric underground cables with aluminium stranded conductor 1100 volts grade complete including providing lugs as required complete all as specified and directed for cross-sectional area 50 Sqmm 3.5 core, complete all as specified and directed.

Supply, laying and testing LT UG cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and as directed

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth wire protected by galvanised iron 15 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings, connecting lead wire from test point to DB etc. complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 25x4mm GI strip up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth strip protected by galvanised iron 40 mm dia. light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel shall be provided & charcoal / salt funnel & other fittings, connecting lead from strip from test point to LT panel etc. complete all as specified and as directed.

S&F TPN copper bus bar box, outdoor type with phase indicator lamps and 200 A capacity copper busbar mounted on porcelain bridge insulator for one incoming cable and 4 outgoing cable, housing in sheet metal enclosure of MS sheet 3.0 mm thick CRCA sheet and angle iron 40x40x6mm frame, painted with two coats including arrangement for cable gland for incoming and outgoing cables, locking arrangement, suitable foundation / platform for mounting the FPB with space for and including the following switch gears complete all as directed by Engr-in-charge:- (a) MCCB 63 Amps, 4 pole, 10 KA (for incoming control)

Supply and fixing of MCB, TPN, 40-100 Amps, 415 Volts, breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB, SPN, 40-63 Amps, 240 Volts, breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB Single pole and neutral rated capacity 6-32 Amps, 240 Volts breaking capacity 10 KA ‘C’ series complete all as specified and directed

Supply and fixing of MCB Single pole, rated capacity 6-32 Amps, 240 Volts breaking capacity 10 KA ‘C’ series complete all as specified and directed

S&F of MCCB, 100 Amps, 16 KA, 4 Pole, 415V, Ics-100% Icu thermal magnetic protection unit complete all as specified and directed.

Supply & Fix GI pipe, light grade, 50mm dia for cable protection fixed to poles / building including two nos. MS clamps made out from 25x3mm MS flat make it to the shape & size including painting with two coats of synthetic enameled paint over a coat of red oxide primer including bolt, nut, washer etc. complete all as directed by Engr-in-charge

M & L for sub main wiring complete with two single core 4 Sqmm, 1100 volts grade (FRLSH), PVC insulated, multi stranded copper conductor cable with continuous copper earth conductor, one single core of 4 Sqmm drawn in and including concealed non metallic heavy duty PVC conduit of suitable dia including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc, complete all as specified and directed Note:- Three runs of 4 sqmm cable and one run of PVC conduit will be measured as one unit length

M & L for sub main wiring complete with two single core 6 Sqmm, 1100 volts grade (FRLSH), PVC insulated, multi stranded copper conductor cable with continuous copper earth conductor, one single core of 6 Sqmm drawn in and including concealed non metallic heavy dutyPVC conduit of suitable dia including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc, complete all as specified and directed Note:- Three runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit length

M & L for sub main wiring complete with four single core 10 Sqmm, 1100 volts grade (FRLS), PVC insulated, multi stranded copper conductor cable with continuous copper earth conductor, one single core of 10 Sqmm drawn in and including concealed PVC conduit of suitable dia including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed conduit wiring, etc, complete all as specified and directed Note:- Five runs of 10 sqmm cable and one run of PVC conduit will be measured as one unit length

M&L for laying reinforced concrete pipes, class NP2 of dia 80 mm, 2 nos. half round (for bottom and top) and before laying excavated area shall be leveling complete all as specified and as directed

Supply and fixing of load line distribution board TPN, vertical, 4 way, double door type, with IP 54 protection fixed on wall or semi flush with with and including incoming MCCB 4 poles, 125 Amps, 16 KA, bus bars, isolated neutral link bar, blanking plates, door earthing including with all accessories complete all as specified and as directed. Note: Outgoing MCBs shall be measured and paid separately.

S & F protection metal, double door, Vertical, TPN DB with 250 Amp rated bus bars for each phase with 2 neutral bus bar 415 volts, 50 HZ IP-43, IK 09, complete with interconnection links, blanking plates, cable ties, identification labels, TPN, 8 way, 24 modules suitable for accommodating up to 160 amps MCCB 4 pole as incomer and SP/TP MCB as outgoing and connected in wall including all cutting holes in or through walls, making good to disturbed walls, ceiling etc including two coats of white / color washing / distempering etc on disturbed surfaces to match with existing surfaces, complete all as directed by Engr-in-Charge

S&F sheet metal enclosure, (for DB's when MCBs to be used), concealed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enameled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed

Supply and fixing LED flood light 120 watt, 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant including with driver and lamp complete all as specified and directed. Make:- Halonix/Crompton/ Havells / Wipro / Bajaj

Supplying, transporting & fixing new steel tubular swaged pole, complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (9.00m long) with and including necessary excavation and earth work, PCC 1:4:8 type D2 as in foundations below pole, PCC 1:3:6 type C-2 arround poles, PCC 1:2:4 type B-1 as in plinth block / coping of size 600x600x300 mm above GL including necessary form work, disposal of surplus soil to a distance not exc. 50 m and depositing where directed, including marking alternate white and black stripes 30 cms height (05 Nos stripes), numbering the pole by 2" high letters & applying two coats of bituminous paint up to planting height & balance shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed.

Supply and fix bracket suitable for holding of two nos. flood lights on either side of pole made out of MS angle iron of size 50X50X5 mm, minimum 1.0 m length duly painted with red oxide primer and two coats of synthetic aluminium paint, including necessary holes drilled for mounting lights including necessary clamps, nuts, bolts, & washers for fixing on poles complete all as directed by Engineer-in-Charge

S&F pole mounted junction box / loop-in loop-out box, weather proof, shock proof and rust E proof of size 195X135X90 mm side hinged door with TPN aluminium terminal block mounted on porcelain or bakelite with and including MCB, SP, 06 Amps for controlling including necessary clamps for mounting on pole etc complete all as specified and directed. Make: Sintex Cat Part No-GSJB 2014 or techno commercially equivalent

Supply and fixing cable with copper conductor PVC round sheathed (flexible) industrial cable of size 2.5 Sqmm from junction box to Street light complete all as specified and directed

M&L for strenthing the column/ beams, providing and applying corrosion resistance non shrink free flow cementitious one component micro concrete with average thickness 30 to 35 mm using having compressive strength (BS 4551-80-60) MPA at 28 days tensile strength (ASTM C348)-2.0 N/MM2@ 28 days Flexural strength (ASM C348)-9 EPOXY BONDING AGENT TM . Thermax having mix density of 1.45 to 1.5 kg/ ltr compressive sterngth (BS- 6319 PT 3) -25 Mpa at 7 days , having an over lay time of 3 hrs at 30c pouring of micro concrete into the formwork using suitable arrangement or if required using pumping devise for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrata etc including dismantling old existing loose / unsound weaken concrete of column and beams including all tools and tackles etc complete all as directed by Engr-in-charge

PROLINK COMPUTERS (BID ID -3141494)

SARATH ENTERPRISES (BID ID -3141366)

ANIL CONSTRUCTION CO. (BID ID -3141159)

AJINKYA VIKRAM GAIKWAD (BID ID -3145746)