REPAIR MAINTENANCE OF INTERNAL WIRING INCLUDING FITTINGS AND FIXTURES MCB DBS CELLING FANS AIR CIRCULATORS GEYSERS HANGAR LIGHTS EARTHING AVIATION FLOOD LIGHTS LIGHTENING CONDUCTORS AND CONNECTED WORKS FOR BLDGS AND HANGARS OF SOUTH SIDE OF RUNWAY UN

Amount

Taking down carefully any type of copper/aluminium point wiring ( light ,fan, socket or power) complete including conduits/casing capping with fittings such as switches ,ceiling roses, pendants , regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Capping double lock type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2 mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per Item No. 02 here in before but for one fan/exhaust fan point controlled by one 5 Amp all as specified and as directed.

All as per Item No.02 here in before but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed.

All as per Item No. 02 here in before but for one light point controlled by two 2-way switches all as specified and as directed.

All as per Item No. 02 here in before but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

All as per Item No 02 above but with 2.5 sq mm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on the independent board complete all as specified and as directed.

All as per Item No 02 here in before but for one light point controlled by one 5 Amp switch drawn through and including non metallic rigid PVC / Steel Conduit of suitable size fixed on surface of walls / ceilings etc complete all as specified and as directed

All as per item No. 08 here in before, but for one fan/exhaust fan point controlled by one 5 Amp switch complete all as specified and as directed

All as per item No. 08 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let flush type on the independent board complete all as specified and as directed

All as per item No. 08 above, but with 2.5 sq mm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on the independent board complete all as specified and as directed.

Taking down unserviceable any type of copper/ aluminium sub main wiring of any type/size/core/ type complete including conduits/casing capping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.

M & L for sub main wiring with two runs of single core 2.5 Sq mm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing capping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sq mm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. Note :- Three runs of cable and one run of PVC casing capping/conduit shall be measured as one unit

All as per Item No 13 here in before but two run of single core 4 sq mm and one run of 4 sq mm cables as earth continuity conductor all as specified and as directed

All as per Item No 13 here in before but two run of single core 6 sq mm and one run of 6 sq mm cables as earth continuity conductor all as specified and as directed.

All as per Item No 13 here in before but four run of single core 10 sq mm and two runs of 10 sq mm cables as earth continuity conductor all as specified and as directed

S & F in repairs switch piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

S & F in repairs modular switch single pole one way 6 A, 240 V complete all as specified and as directed

S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed

S & F in repairs bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed

S & F in repairs modular bell push single pole, one way, 240 V, 6 A complete all as specified and as directed

S & F in repairs switch socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and as directed

S & F in repairs modular socket outlet 2 in 1, 6 Amp , 240 volts, complete all as specified and as directed

S & F in repairs switch socket combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

S & F in repairs modular socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 volts complete all as specified and as directed

S&F in repairs ceiling rose 3 terminal 230 volts, PVC polycarbonate, isolated body completed all as specified and as directed.

S & F in repairs call bell ding dong AC,230 volts, single pole all as specified and as directed.

S&F in repairs stepped type electronic fan regulator flush type as per existing model on the existing board all as specified and as directed

S&F in repairs stepped modular electronic fan regulator flush type on the existing board all as specified and as directed

Taking down unserviceable any type of main switch, DB's including MCBs including wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed.

S&F in repairs sheet metal enclosure SPN with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified and as directed.

All as per Item No 31 here in before but MCB DB TPN 4 way DB 415 V with 200 A rated busbar all as specified and as directed.

S&F in repairs MCB DB SPN 8 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed.

All as per item No 33 here in before but MCB DB SPN 4 way DB 230 V with 200 A rated bus bar all as specified and as directed.

All as per item No 33 here in before but MCB DB SPN 12 way DB 230 V with 200 A rated bus bar all as specified and as directed.

S & F in repairs MCB DB TPN, 8 way, (MCCB + 24 way O/G) double door, vertical type including one MCCB of 100 amps breaking capacity 25 KA , 4 pole without MCB complete all as specified and as directed

Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 25 KA , 4 pole thermal magnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB's complete all as specified and as directed

S & F in repairs MCB TPN 40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs MCB TPN 32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs MCB TP 40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs MCB TP 32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs MCB SPN 06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F in repairs wall mounting Plug and socket DBs TPN 32 Amp Complete all as specified and as directed. Make : CG Cat No CGSC-412.3267 or equivalent in C & S / Legrand

S & F in repairs energy efficient surface mounted LED Luminaire 18 watts 4' long, with acrylic cover complete with all accessories including necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 m all as specified and as directed. Make : - Bajaj Cat No BCLSBAL 18W CW or equivalent in Philips/CG

S & F in repairs energy efficient surface Mounted LED Luminaire 20 watts 4' long, with acrylic cover complete with all accessories including necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 m all as specified and as directed. Make : - Bajaj Cat No BCLSBAL 20W CW or equivalent in Philips/CG

S & F in repairs energy efficient surface Mounted LED Luminaire 10 watts 2' long, with acrylic cover complete with all accessories including necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 m all as specified and as directed. Make : - Bajaj Cat No BCLSB 10W NW or equivalent in Philips/CG

S & F in repairs recess mounting high lumen LED flat panel 1'X1' 18 Watt, white powder coated CRCA housing with high power LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver ,LED strip, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and as directed. Make:- Bajaj Cat No - BZRSQL 18 W WH or equivalent in Philips/CG

S & F in repairs recess mounting high lumen LED flat panel 2'X2' 36 Watt, white powder coated CRCA housing with high power LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc. and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and as directed. Make:- Bajaj Cat No - BZRSQL 36W GZi WH or equivalent in Philips/CG

Taking down old unserviceable CFL bulb and supply and fix retrofit LED bulb 7/9/12W 240volts,50Hz, including removing old unserviceable item complete all as specified and as directed.

S&F in repairs LED light fitting 1x18 watts Surface mounted LED down lighter in powder coated white finish with integrated electronic driver complete all as directed. Make :- Bajaj Cat No BGSLO Sleek 18W WH RD or equivalent in Philips/Wipro.

M & L for earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to copper strip size 20 x 3 mm thick by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 m from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

M & L for earthing complete with galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

S & F copper strip 20 x 3 mm Earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc all as specified and as directed.

M & L for exhaust fan AC single phase 230V of size 300 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified and as directed.

S & F in repairs Switch flameproof WP Rotary type with termination box in LM6,15A single pole 250V all as specified and as directed.

M&L for painting of ceiling fans complete, in situ with one coat of synthetic enamel paint by spray gun after cleaning all dust etc all as specified and as directed.

S & F in repairs air termination, single pointed copper rod 12 mm dia and 300 mm long all as specified and as directed.

S & F in repairs test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hex. head screw all as specified and as directed.

S & F in repairs MS black conduit 25 mm dia medium grade including all fittings / fixtures , junction boxes etc fixed on wall , ceiling / roof/ structure etc for hanger lighting complete all as specified and as directed

All as per item No 60 here in before but of size 20 mm dia all as specified and as directed.

Taking down aluminum strip of size 20 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground and refixing in the same location with new nuts and bolts, screws of suitable size and length and connected to air termination rod on top of the hangar complete all as specified and as directed.

S&F in repairs copper strip 20 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground incl taking out old one all as specified and as directed.

M&L in repair for sub main wiring with two runs of single core 2.5 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade drawn through in and including new / existing steel conduit / existing concealed / open PVC conduit/ PVC Casing - capping, ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board to light/fan/any description and testing on completion etc including re-fixing the conduit/ PVC casing capping, other accessories for the following runs as directed

All as per Item No.64 here in before but for 3 runs of 2.5 Sqmm all as specified and as directed.

All as per Item No.64 here in before but for 4 runs of 2.5 Sqmm all as specified and as directed.

All as per Item No.64 here in before but for 5 runs of 2.5 Sqmm all as specified and as directed.

All as per Item No.64 here in before but for 1 run of 1.5 Sqmm all as specified and as directed.

S & F in repairs Integral decorative LED bollard with opal acrylic with IP-65 protection of 9 watts capacity all as specified and as directed. Make : Bajaj Model / Cat No BGBOM 650 9W LED or equivalent in philips/CG

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping all as specified and as directed.

S&F in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified and as directed. Make: Bajaj Cat No BGAV 302 LED or equivalent in Philips/CG

S & F in repairs 1 x 60 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified and as directed. Make : Bajaj Cat No BRTFG 60W LED V3 or equivalent in Philips/CG

M & L for street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape suitable for below mentioned security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc all as specified and as directed.

S&F in repairs LED High bay luminaires 1 x 150 watts Energy saving, environment friendly & robust open type vertical high bay LED luminaire with high power COB LED as light source all as specified and as directed Make : Bajaj Product No BGHB 150W LED G IV equivalent in Philips / CG

S&F in repairs LED High bay luminaires 1 x 200 watts Energy saving, environment friendly & robust open type vertical high bay LED luminaire with high power COB LED as light source all as specified and as directed Make : Bajaj Product No BGHB 200W LED G IV or equivalent in Philips / CG

Supply and fix in repairs LED flood light fitting 200 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and as directed. Make:- Bajaj cat part No.BJFL 200W LED I or equivalent as per Appendix ‘B’.

Supply and fix in repairs LED flood light fitting 240 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed. Make:- Bajaj cat part No.BJFL 240W LED or equivalent as per Appendix ‘B’.

Taking down carefully ceiling fans of size 1200/1400 mm sweep at any height of any sweep/make/model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing ,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder,terminal adoptor, screws, nuts ,spring washers for blade/body etc and replacement of components/accessories such as ball bearings ,gun metal bushes, capacitor, canopy top& bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed.

All as per item No. 74 here in before but exhaust fan of size upto 300 mm and 380 mm sweep all as directed.

All as per item No. 74 here in before but exhaust fan of metal body size above 380 mm and upto 450 mm sweep all as directed.

All as per item No. 74 here in before but Air circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

All as per item No. 74 here in before but for wall fan/pedestal fan 400 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance. Notes for Item Nos 74 to 78 :- (i) Spare parts will be measured and paid separately under relevant item of schedule as "Supply Only " (ii) Rewinding of fan motor, painting will be measured and paid separately under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate for these items

Material and labour for painting to ceiling fan of size 1200 mm sweep to 1400 mm sweep complete body , blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and as directed Note:-Painting work to be carried out after dismantling of ceiling fan

All as per item No. 79 here in before but exhaust fan of metal body size above 300 mm to 450 mm sweep all as directed.

All as per item No. 79 here in before but Air circulator wall mounted type 450 mm to 600 mm sweep all as directed.

Material and labour for rewinding of ceiling fan motor of size 1200 mm sweep to 1400 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing, including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motor complete all as specified and as directed.

All as per Item No 82 here in before but of exhaust fan of size upto 300 mm and 380 mm sweep all as specified and as directed.

All as per item No 82 here in before but of exhaust fan of size above 380 mm and upto 450 mm sweep all as specified and as directed.

All as per item No 82 here in before but of air circulator wall mounted type 450 mm to 600 mm sweep all as specified and as directed.

S & F in repairs capacitor of 2.5/3.15/4.0 mfd capacity for ceiling fan of any sweep all as specified and as directed.

Supply only shackle clip assembly with rubber bush reel and nuts ,bolts and washers suitable for ceiling fan of any sweep/type all as specified and as directed.

Supply only ball bearing suitable for ceiling fan/exhaust fan/air circulator/pedestal fan any type all as specified and as directed.

Supply only split pin as per sample suitable for ceiling fan all as specified and as directed.

Supply only MS nut bolt with split pin as per sample all as specified and as directed.

Supply only plastic canopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type all as specified and as directed.

Supply and fix down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rod with two coat of synthetic enamel paint over one coat of red oxide primer all as specified and as directed.

Supply and fix copper conductor cable, PVC insulated, sheathed, flexible, multi stranded, ISI marked, 1100 volts grade 3 core ;0.75 sq mm and including electric connection to ceiling fan and ceiling rose complete all as specified and as directed

Removing old unserviceable blade assembly from exhaust fan and supply and fix exhaust fan blade assembly suitable of size 300m to 450 mm sweep and including locking nuts and testing complete all as specified and as directed.

Supply and fix in repairs new metal blade assembly complete for air circulator of existing make and type all as specified and as directed.

Taking down storage type water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat ,pilot lamps with wiring, insulating glass wool, thermal cut out, pressure release valve, safety valve, aperture plate assembly etc and examine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut, bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including fixing back in same location after connecting up of water & electric connections and testing for its satisfactory functioning complete all as specified and directed. Notes:- (i) Spares will be measured and paid separately under relevant item of schedule as "Supply Only" (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

All as per item No.96 here in before but of capacity 50 litre all as specified and as directed.

S & F in repairs heating element threaded/push type of triangle base/round base type 1.5/2 KW for geysers all as specified and as directed.

S & F in repairs aperture plate assembly suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and as directed

S & F in repairs copper/steel inner tank suitable for storage type water heater (geyser) 25/50 litre capacity all as specified and as directed.

S & F in repairs geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type all as specified and as directed.

Supply and fix PVC connection pipe15 mm dia 450/600mm long with end nuts and washer, suitable for hot water and cold water outlet/inlet of geyser including removing old unserviceable item complete all as specified and as directed.

Supply and fix bib tap 15 mm dia standard pattern of PTMT white colour high pressure screwed for iron GI pipe/fittings including removing old unserviceable item complete all as specified and as directed

Supply and fix stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittings including removing old unserviceable item complete all as specified and as directed

Supply and fix copper conductor cable, PVC insulated, sheathed ,flexible, multi stranded ,ISI marked, 1100 volts grade, 3 core ;2.5 sq mm and including connection to geyser and plug outlet and including removing old unserviceable item complete all as specified and as directed

Material and labour for painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and as directed Note:-Painting work to be carried out after dismantling of storage type water heater(geyser)

All as per item No 106 here in before but of capacity 50 litre all as specified and as directed.

S & F in repairs thermostat BI-metal thermal relay suitable for geyser of any capacity all as specified and as directed.

S & F in repairs safety valve for any type geysers all as specified and as directed.

S & F in repairs non returning valve (NRV) for any type geysers all as specified and as directed.

sapna enterprises