Finishing works of block 102B and associated areas at INRPC BARC Tarapur.

Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.

Lead charges for Lead exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc.

Labour charges for murum filling under floors of specified thickness in layers of not exceeding 150 mm thickness including consolidation etc.complete all as per drawings and specifications and as directed by the Engineer-in-charge. (using murrum available at BARC campus with a lead of up to 4 Km) Note: a) Only compacted volume will be measured and paid, b) Selected / approved excavated stuff stored within the DAE premises shall be issued free of cost to the contractor for filling purposes.

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge(230mm With outside material).

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.(Excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.)

Extra over item 5 for RCC M60 grade

Extra for RCC Using Ready Mix Concrete including transporting and pumping from approved batching plants

Providing and laying in cement concrete(RCC/PCC) of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per per drawings, specifications and as directed by the Engineer-in-charges but excluding the cost of shuttering, centering and steel reinforcement.

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels.

Providing and Laying Solid cement concrete block masonry with M-5 Grade of 190/ 140 mm thick in super structure in cement mortar 1:4 (using crushed sand). The rate shall also including scafolding/ staging, drilling of holes (if any) for fixing of rebar by applying chemical or welding or as directed by EIC including Making the cut out opening in masonary for flush concealing DB/plug point/switch box enclosure including dismantling in floor or walls by cutting masonary and making good the damage to walls, painting, etc. existing surface including disposal of rubbish to the naerest dumping ground at a minimum distance of 50m away from the building. Complete all as per drawings and specifications and as directed by the Engineer-in-charge. Note:( Reinforcement will be paid under relevant item)