CAMOUFLAGE PAINTING IN TECHNICAL AREA AT AF STATION SURATGARH

Amount

BOQ (Camouflage Painting in Technical area at AF Station Suratgarh.)

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed by Engineer in Charge.

Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rough cast plaster over and including 10 mm thick rendering coat in cement mortar 1:4 on fair faces of brick or concrete surfaces.complete all as specified and directed by Engineer-in-Charge.

Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished the surface even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface finishing even and smooth without using extra cement over water proofing layer with Dr. Fixit Primeseal/Sika/Fosroc external wall waterproofing, complete all as specified and directed by Engineer-in-Charge.

Preparation of old surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of white wash on old decorated surfaces, complete all as specified and directed by Engineer-in-Charge.

Preparation of new surfaces of ceilings and applying three coats of white wash, complete all as specified and directed by Engineer –in-Charge.

Preparation of old surfaces of Ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of white wash on old decorated surfaces, complete all as specified and directed by Engineer –in-Charge.

Preparation of old surfaces of Walls/Ceiling/Floor with complete scraping by Mechinised means (Vacuum bassed sanding machine) and remove/Scrap smoke soot, moulds, efflorescent salts, trading oil, greasy spots etc and applying 1.5 mm thick birla/JK wall care putty and rubbing with sand paper to recive regular/even finish and applying two coat of exterior acrylic emulsion paint (antifungal) Make:- Asian/Berger (in Camouflage pattern using number of colour) pattern shall be approved by GE, complete all as specified and directed by Engineer –in-Charge.

Preparation of old surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of exterior acrylic emulsion paint (antifungal), (in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge.

Preparation of old surfaces of walls including scraping by mechinised means (Vacuum based sanding machine); scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and washing with water and applying two coats of exterior acrylic emulsion paint (antifungal), (in camouflage pattern using number of colours), two coats of exterior primer of Asian smart care damp sheeath / Berger weather cat ext primer to receive regular / even finish, complete all as directed by the Engineer-in-Charge.

Preparation of old surfaces of ceilings including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of exterior acrylic emulsion paint (antifungal), (in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge. Notes for item No 9.00 to 12.00 : (i) The contractor shall procure 50% quantity of exterior acrylic emulsion paint required in the work within 15 days from the date of commencment and deposit the same in the custody of Engineer-in-Charge.Engineer-in-Charge shall maintain a record of the material brought and consumed at site in the work and purchase vouchers shall be defaced and verified by the Engineer-in- Charge and same shall be submitted to GE for verification. (ii) Material shall be recorded in MB under proprietary branded material duly signed by all concerned . (iii) Pattern of camouflage shall be approved by GE.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper (white or coloured) over and including one coat of chalk whitening by auto roller, complete all as specified and directed by the Engineer-in-Charge.

Preparation of plastered wall surfaces of new or old surfaces, leveling/ edging the distrurbed places/edges using necessary filling compund and applying 2mm thick Birla / JK wall care putty to obtain smooth regular/ even finish by using sand paper, complete all as specified and directed by the Engineer-in-Charge.

Preparation of old surfaces of walls including scraping by mechinised means (Vacuum based sanding machine); scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and washing with water and applying one coat of oil bound distemper (white or coloured) by auto roller including removal of nails, complete all as specified and directed by Engineer –in-Charge.

Preparation of old steel or iron surfaces over 10 cm width or girth not otherwise described of any description and applying two coats of synthetic enamel paint (of approved shade), complete all as specified and directed by Engineer –in-Charge.

Preparation of old painted wooden surfaces over 10 cm width or girth, not otherwise described of any description and applying two coats of synthetic enamel paint of approved shade, complete all as specified and directed by Engineer –in-Charge.

Dismentling of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge. Note :After stacking of Serviceable bricks rest debries shall be removed out side of MOD land as directed.

Brick work with fly ash bricks of size 23 x 11.5 x 7.5 cm conforming the requirement as specified in IS12894-2002, straight or curved on plan not exc 6m mean raidus built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.

Brickwork with sub class 'B' bricks , straight or curved on plan not exc 6m mean raidus (except brick) built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge. Note: Servicable bricks retrived from serial Item No 18 above shall be used after proper cleaning and washing of old bricks.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 15 of tender documents.

H S BUILDERS

RAM CHANDER CONTRACTOR

M/S Shree Ram Enterprises

CAPITAL CONTRACTOR AND SUPPLIER

SRI SAI CONSTRUCTION COMPANY