Karnataka

AOC

Works

Irrigation and Other Works

Rejuvination of Ankli in Hadagali Taluk Vijayanagara District for the year 2025-26

Minor Irrigation Department

Minor Irrigation Division Bellary | Ballari, Karnataka

Amount: ₹44.8 LCloses: 30 Apr 2026Closed

Timeline

Published22 Apr 2026
Closed30 Apr 2026
Awarded—

Bids

1 Bid30 Apr 2026

#	Company	Amount	Status
1	H ESHANNA ₹46.9 Laccepted-aoc	₹46.9 L	accepted-aoc

Tender Value

₹44.8 L

EMD Value

₹90,000

Closing Date

30 Apr 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

SHILPA K

Office Number

Work Description

Rejuvination of Ankli in Hadagali Taluk Vijayanagara District for the year 2025-26

Tender Information

Tender ID

MI/2025-26/IW/WORK_INDENT11544

Reference Number

MI/2025-26/IW/WORK_INDENT11544

Tender Type

Open

Product Category

Irrigation and Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

Minor Irrigation Division Bellary

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredContractor Registration certificate, Class 3 and Above, PWD Registration

RequiredAchieved in at least TWO financial years during the last five years i.e. 2020-21 to 2024-25 a minimum financial turnover in all classes of civil engineering construction works only of Rs.4476185.10 Financial turn over of previous years will be given a weightage of 10percentage per year to bring to them to the price level of the FY 2025-26.

RequiredSatisfactorily completed at least 90percent of contract value in the last five years i.e.2020-21 to 2024-25 as a prime contractor,at least one Similar work such as Improvements/Rejuvination of LIS works value not less than Rs. 22.38 lakhs. The weightage of 10percent will be given per year to bring them to the price level of the FY 2025-26

RequiredLiquid assets and or availability of credit facilities of not less than Rs.13.43 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc

RequiredThe bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Contractor Registration certificate, Class 3 and Above, PWD Registration

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The tenderer should maintain the scheme during the defective liability period.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the KPPP portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

Unbalanced tenders should include Security amount and unbalanced amount that is difference of amount put to tender and quoted amount.

EPF and ESI Registration Certificate of Contractor should be uploaded upto date.

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The contractor has to furnish Additional performance security deposit of an amount equal to the difference in the amount put to tender and the tendered amount in addition to security deposit of 5% of contract price.

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use and certificate shall be submitted.

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached duly attested to e-tender document. The original certificates/document shall be produced on or before stipulated date and time for verification. Scanned signature of bidder/authorized representative of the bidder shall be attached while up loading bid document.

Each item of BOQ to be read as with all lead and lifts and as per the directions of Engineer in charge.

A copy of GST registration certificate to be uploaded.

Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos to be uploaded.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

Incomplete tender documents will be rejected.

Corrigendum will be published in web site for all modifications/corrections if any.

The contractor /firm shall send the authorization letter for the representatives duly attesting their signature.

The intending bidder are advised to visit the site of work before submission of the tenders.

If any of the Contractor who have been black listed as per Government order are not eligible to participate in this tender.

As per the Karnataka building and other construction workers welfare cess act 1996 1 % of the bill amount will be deducted from the bill.

The tender Processing charges paid by the bidder are not refundable even if the tender are cancelled.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Further information can be had from the office of the Executive Engineer, Minor Irrigation & Ground Water Development Division, Ballari during the office Hours.

The work done certificate shall be issued not below the rank of Executive Engineer.

All relevant documents as per KW-2 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The contractor shall quote the rates without adding GST either materials or works contract (Service). GST payable by the Contractor under this works Contract will be paid to the Contractor separately over and above the Contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Annual turnover certificate along with Balance sheet certified / attested by Chartered Accountants should be uploaded with 18-Digitis system generated unique number (UDIN Number)

The amount put to tender is Exclusive of GST. Hence GST will be paid separately.

The department and contractor are bounded for Excess payment/recovery in case of revision in GST Rates.

The bidders are instructed to visit the site before submitting the bid and copy of the site visit certificate has to be obtained by the concerned AEE and the same has to be uploaded in KPPP portal.

Fallow the conditions as per attached Government Order MID/434/MISU/2025 dt:22.08.2025

AMOUNT SHOULD NOT EXCEED THE APPROVED ESTIMATED COST

The contractor quoting 20% below or beyond 20%below has to submit the rate analysis for quoted rates.

Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5.0- B) Where, A Maximum value of civil engineering works executed in any one year during the last five years i.e. 2020-21 to 2024-25 (updated to 2025-26 price level) taking into account the completed as well as works in progress. N, Number of years (03 months)prescribed for completion of the works for which tenders are invited. B, Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 09 months (09/12-0.75) year i.e. period of completion of the works for which Tenders are invited.

Fee & Financial Details

Tender Fee Amount

₹1,120

EMD Fee Amount

₹90,000

Important Dates

Last Activity

30 Apr 2026

Published

22 Apr 2026

Download Ends

29 Apr 2026

BOQ Preview

•

Rejuvination of Ankli in Hadagali Taluk Vijayanagara District for the year 2025-26

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

•

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area 3 Sqm and below( Ref :- As ...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). ( Ref :- As per relevant IS)

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. ( Re...

•

Cutting and removing jauliflora bushes 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complet...

•

Excavation for seating the dam, tail channel, spillway, intake structure and appurtenant works including placing neatly or disposing off the excavated stuff as directed etc., complete with all leads a...

•

Providing cohesive non-swelling ( CNS ) soil lining to canals using soil from borrow area including cost of all materials, labour, machinery, spreading soil in layers of thickness not more than 150 mm...

•

Providing and laying 100 mm thick in-situ M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for canal lining deploying batching plant, transit mixer and vibratory cy...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Providing S&S RCC SPUN / VIBRATED CAST PIPE (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

•

Laying,Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches, laying true to line and level at both destinations and jointing of...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Supplying of spare parts to 100 HP oil lubricated DWT pump to facilitate from the site to workshop by removing motor turbine base, tee joint, column pipes, line shaft and bowl assembly etc., Complete,...

•

Winding of 100 HP DWT 3 phase induction motor Kirloskar/Jothi/Croption greaves make motor with 'B' class insulating materials such as triple papers, emperor cloth, cotton rape, varnish (oil) air dry, ...

•

Supplying of spare parts nad repair re conditioning, trail running of 10" sizes N.R. valve including dismentaling and fecilete from site work to work shop by removing from delivery end of T joint incl...

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all...

•

Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations c...

•

Supplying and installation of RUBBER MAT 1mtr x 1mtr - 1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.

•

Design, manufacture, supply, erection, trail running, performancetesting and commissioning of vertical turbine pump of approved makeconforming to IS: 1710 having specified pump output under specified ...

•

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...

•

Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire ch...

•

Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...

•

Transformer oil

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-2 Ankli 11544.doc

Tender Document • 24.12 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

H ESHANNA

₹46.9 Laccepted-aoc