WBPWD/EE/PMED/NIQ-55/2024-25

Amount

Supply ,delivery and erection of 9 Mtr. HDG Octagonal Poles in 3 mm shaft thickness with inbuilt loop Box with locking arrangement railway type consisting of 1 no apprpriate size of three pole connector and 1 no fuse on 6mm bakelite sheet , having Top A/F 70, Bottom A/F 155 , Base Plate 260x260x16 as per manufacture design to suitable for wind speed as per IS:875. A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR). B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 C) Galvanization as per BSEN ISO:1461 [Make:Transrail/Utkarsh/Bajaj/Valmont]

Supply and fixing of 4 Nos. M24X 750 foundation bolts as per EN-8 Grade manufactured from special steel along with nuts, washers, and templates.

Supply and fixing of 0.6 mtr radius circular bracket suitable for fixing 4Nos. LED Fittings.

Erection of HDG Octagonal pole muffing with cement concrete square foundation made with stone chips, PCC-100mm (1:3:6) of base block RCC (1:1.5:3), size (0.609x0.609x0.461mtr) below ground level. And upper portion size 0.406x 0.406x 1.22mtr. The hole concrete foundation made with 10mm dia. TMT Bar 0.15mtr apart (Horizontally & vertically) cage structure. The muffing should be 0.304mtr above the ground level incl. 1.5 mm thick neat cement finish up to 0.762mtr. from top level. 04 nos. 20/25mm dia 1.67mtr length GI FDN Bolts with Nuts Inside the muffing with 10mm thick base plate by welding acordingly matching with the HDG pole base plate hole. incl. 02nos. 30mm dia polythene pipe inside the center of muffing for passing 02 nos cables.

SITC of floor mounted dust & vermin proof (IP-66)feeder pillar with CU bus bars on the angle iron frame structure having front & back openable double door with locking arrangement providing compartmentalize space for 1 No. Energy meter incl. provission of window for meter reading of deep fabricated by 2mm thick MS Sheet incl. S/F the following materials in it including painting etc. to be grounted in ground with CC foundation as per direction of EIC. (make- L&T/Legrand) INCOMER: (a) S&F of 415 V,40 A FP MCB Isolator of breaking capacity 10KA & ''C'' Charecteristic - 1 nos. (b) 415 V 63A capacity 4 bar copper busber chamber made of 16 SWG CRCA sheet compring with 4 nos 63A capacity eletrolytic tinned copper ber supported on nonhygroscopic insulating chair.-1 set. OUTGOING (A) S&F 415 V,20 A FP MCB of breaking capacity 10KA & ''C'' Charecteristic - 2 nos. (B) Street light/Outdoor light/Compound Light Timer DB(Water Proof) on flat iron frame incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and febricated with following items as per instructions of EIC iii) 415 V , 4P, Power Contractor (rating above 40 Amp) with accessories ----- 01 no iv) Astronomical time switch --- 01no v) Toggle switch for manual/auto operation --- 01no. vi) Double door 2+4 Way SPNDB ---- 1No vii) Necessary connection by copper wire. [Make = ABB, Simens, Legrand, L&T, Havelles or as per EIC]

Supply & delivery of 150 W LED floodlight made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP66 protection.CRI> 70, CCT- 4000K, System efficacy≥120 LPW, 10KV SPD [Phillips/Bajaj//Lighting Technology/Crompton] [5 Years Warranty on this item]

Supplying of 1.1 KV Grade XLPE Aluminium conductor, PVC sheathed, armoured, 4 core 10 sq. mm cable conforming to IS 7098, of earthed system of following size. [ Make : Gloster / Polycab / Havells / RR Kabel ]

Supply of HDPE Pipe conforming to IS - 4984 - 1985 (Dia) - 32 mm

Laying of HDPE pipe (previously supplied) in underground trench 460 mm width x 760 mm avg. depth including restoring the surface duly ramed, as per direction of EIC.

Laying only 4 Core 10 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 10 sqmm

Supplying & fixing medium gauge 32 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Cement Concrete road cutting avg. dept. 1 ft x avg. width. 1 ft including mending finishing good damages to original finish concrete floor by net cement concrete.

Inter connection of compound light fittings by 3 x 2.5 Sq. mm. PVC insulated copper wire ( Finolex/Polycab/Havells/RR Kabel) from loop box inside the pole to light fittings through pole & bracket with Pricision MMS PVC pipes as per direction of EIC

Earthing with 50 mm dia GI pipe (ISI-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

S & fixing earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

M/S JOGMAYA ENTERPRISE (BID ID -5656715)

NANABABA ENGINEERING COMPANY (BID ID -5671910)

S. D. Construction (BID ID -5670271)