Interior and electrical work for new administrative office of Kolhapur Zilha Grampanchayat Adhikari Sahakari Pat Sanstha Ltd. Kolhapur.

CHAIRMAN/ VICE CHAIRMAN

Full height partition Providing and fixing solid full height partitions as per drawing made out of 2" X 2" X 1.5" thick Plywood section frame work @ 600mm c/c both ways Horizontally and Vertically. The vertical alternate frames to be fixed to the ceiling with necessary fixtures. The framing shall be finished with 8 mm thk. BWR Grade IS 303 confirmed plywood panelling on both sides with approved make 1mm thick laminate . The skirting should be as per approved make 1mm thick laminate as per drawing and direction. The rate is including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, The necessary openings in the partitions shall be provided for Electrical Conduits, Electrical Switches, Light Fixtures, Painting, Fire Detectors, etc complete. As per detailed drawing given by Architect / instructions given by Architect on site etc. complete.

Chairman table Providing & fixing Chairman Manager Table 8'0" x 2'6" x 2'6" with 2 nos drawer unite below of 1'6" X 1'9" X 2'3" made out of in 19 mm thk. BWR Grade IS 303 confirmed plywood frame work for table and side table tops, sides, apron, shelves and finish with 1 mm thk approved make laminate.Top surface wil be Corian material colour / Shade will be approved by architect. 1 no. Shelf for CPU to be provided below the desk as shown in the drg. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19mm thk BWR Grade IS 303 confirmed ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double approved sliders. A drawer unit as shown in the drg shall be provided. 3 nos of drawers with 1 mm thk approved make laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm.

Premium Executive chair

Visitor chair

Panneling Providing and fixing of wall pannelling as per design in 8 mm thk plywood of approved make and framming in 19mm thk plywood with 1mm thk laminate finished as per approved shade and design including cleaning. etc (Design/ Shade as per Architect approval )

Low height Storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 8mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete.

Decorative wall paper Providing and fixing wall paper as per architect seletion ( Basic rate -80-85 /sq.ft)

Leadge and box for display Providing and fixing display 3 no display box of 19 mm thk ply for display and 50 mm thk leadge of 12" depth with laminate finish as per the approved by architect.