End Wall Sliding Door complete for LHB Coaches to RCF Drg. No. LW 56350,

Special Eligibility Criteria

1. 1

   Purchaser reserves the right to procure Bulk or Entire quantity from RCF approved vendors or their authorized agent, for the item, details as per para 2.8.5 of attached bid document besides this para 2.8.1 to 2.8.4 shall also be applicable. No developmental order will be placed

   Document requiredConfirmation required
2. 2

   Only Class-I and Class-II local supplier as defined under the order (Revised Public Procurement (Preference to Make in India), Order - 2017), shall be eligible to bid irrespective of purchase value except for the items which are restricted to be procured from Class-I local suppliers only, details mentioned in the para 2.24 of attached bid document. Vendors who do not qualify to be Class I or Class II , as the case may be, local suppliers should not quote in the tender as their offers shall not be considered for any ordering. Further, for the for the items restricted to be procured from Class- I local suppliers only (list of such items mentioned in para 2.24 where the Ministry of Railway is the nodal ministry), vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railway shall not be liable for any loss or damage caused to the vendor. Para No. 2.24 of the attached bid document shall be applicable

   Document optionalConfirmation required

Check List

1. 1

   (1)The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended] (2)The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender. (3) If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value ) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fields; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
2. 2

   Have you attached any performance statements with your offer?

Commercial-Compliance

1. 1

   The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in para 2.24 of NER bid document. The bidder shall provide self- certification that the item offered meets the minimum local content and shall give details of the location(s) at which the local value addition is made.

   Document optionalConfirmation required
2. 2

   Code of Integrity, Misdemeanor and Penalties :- I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner / director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.(Note: - May confirm as Yes , to certify all the above certification . ) (2) In case your confirmation in commercial compliance above regarding Code of Integrity, Misdemeanor and Penalties is "No" , then provide/upload the names and addresses of your sister concerns or affiliates .

   Confirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   1-Validity of offers: Unless otherwise stated, offers should be valid as per para 1.6.3 of attached bid document. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected. 2-No PVC has been incorporated in the schedule of requirement, bidders must quote on fixed price basis only. Offers with PVC will be summarily rejected. 3-EMD:- The offers not accompanied by requisite EMD will be ignored summarily, unless falling in exempted category as per para 1.18 of attached bid documents. The firm claiming exemption from EMD should clearly indicate valid reasons for such claim duly attaching scanned copies of relevant documents with their e-offers. The tenderers request for adjustment of EMD relating to their earlier tenders will not be considered. They will have to deposit EMD afresh. 4-Authorized Agent:- 1-Any firm quoting on behalf of OEM must submit a tender specific authorization certificate along with their offer and agree for inspection as per para 2.3 of attached bid document, failing which offer shall be ignored without any backreference. 2- The OEM / Authorized dealers/agents must comply with the following conditions, failing which their offer(s) will be ignored. (i) In a tender, either the Indian Agent on behalf of the Principal/OEM or Principal/OEM itself can bid but both cannot bid simultaneously for the same item/product in the same tender. (ii) If an agent submits a bid on behalf of the Principal/OEM, the same agent shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product. 3.Neither one agent can represent two OEMs nor can one OEM authorize two agents.