Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.9 LAccepted-AOC RZ 212F D BLOCK RAJ NAGAR PART II PALAM COLONY NEW DELHI 110077 | SOUTH WEST | DELHI | 110077 | 1 | Accepted-AOC AOC | |
| 2 | 2₹40.4 L+₹6.4 L (19.0%)Rejected-Finance | 2 | Rejected-Finance Rejected being not L1 | |
| 3 | 3₹40.9 L+₹7.0 L (20.7%)Rejected-Finance | 3 | Rejected-Finance Rejected being not L1 | |
| 4 | 4₹43.0 L+₹9.1 L (26.9%)Rejected-Finance | 4 | Rejected-Finance Rejected being not L1 | |
| 5 | 5₹46.7 L+₹12.8 L (37.7%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | 5 | Rejected-Finance Rejected being not L1 |
| Sl No | Description | Qty | Unit | mayur enterprises L6 | MV Engineers And Contractors L1 | Rajindera Enterprises L2 | DS CONSTRUCTION L4 | KISHORE ENTERPRISES L3 | Vijay Electricals L8 | M/s JAIMAA ASSOCIATES L7 | M P TYAGI ENGINEERS AND CONTRACTORS L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 11 KV HT cables of different sizes from both ends, removal of Fault, Re-connections and testing of cables after removal of fault complete all as specified and directed by Engr-in-Charge..
Note: (a) 11 KV HT cable & joints shall be measured and paid for separately under respective items of schedule.
(b) Retrieved old serviceable cable cover will be laid in trenches for cable protection. If extra PCC cover and sand required at site shall be measured and paid separately under respective items of BOQs.
(c) Excavation and earth work will be measured and paid for separately under respective items of schedule. | 35 | Each Job | 3,000 ₹1,05,000 | 4,000 ₹1,40,000 | 6,000 ₹2,10,000 | 5,000 ₹1,75,000 | 4,500 ₹1,57,500 | 3,000 ₹1,05,000 | 5,000 ₹1,75,000 | 2,500 ₹87,500 Lowest |
| 2.00 | All as per item Ser No 1 here in before but 1100 Volt LT cables complete all as specified and directed by Engr-in-Charge. | 85 | Each | 3,000 ₹2,55,000 | 3,700 ₹3,14,500 | 6,000 ₹5,10,000 | 4,000 ₹3,40,000 | 4,000 ₹3,40,000 | 3,000 ₹2,55,000 | 4,000 ₹3,40,000 | 2,500 ₹2,12,500 Lowest |
| 3.00 | Taking out faulty underground 1100 Volt LT cable of different sizes by excavation and removing bricks/cable covers of any size and relaying in the same trenches or re routing after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks/cable covers as required.
Note: (a) 1100 Volt LT cable & joints shall be measured and paid for separately under respective items of schedule.
(b) Retrieved old serviceable bricks/cable covers will be laid in trenches for cable protection. If extra bricks/PCC cable cover and sand required at site shall be measured and paid separately under respective items of BOQs.
(c) Excavation and earth work will be measured and paid for separately under respective items of schedule. | 200 | RM | 100 ₹20,000 | 25 ₹5,000 Lowest | 100 ₹20,000 | 100 ₹20,000 | 100 ₹20,000 | 3,000 ₹6,00,000 | 60 ₹12,000 | 250 ₹50,000 |
| 4.00 | All as per item Ser No 3 here in before but 11000 Volt HT cables complete all as specified and directed by Engr-in-Charge. | 200 | RM | 100 ₹20,000 | 45 ₹9,000 Lowest | 150 ₹30,000 | 100 ₹20,000 | 100 ₹20,000 | 3,000 ₹6,00,000 | 60 ₹12,000 | 250 ₹50,000 |
| 5.00 | Material and labour for disconnecting faulty /burnt end or portion of cable by removing the cable from loop including necessary excavation & earth work , suitable size of thimble LT tap , relaying and reconnecting the cable by removing faulty/burnt portion of cable and preparing fresh terminals for 25 Sqmm 3.5/4 core to 240 Sqmm 3.5 core of LT cable to LT Panel/pole/main switch complete all as specified and directed by Engr-in-Charge. | 5 | Each Job | 1,000 ₹5,000 | 210 ₹1,050 Lowest | 500 ₹2,500 | 1,500 ₹7,500 | 500 ₹2,500 | 4,000 ₹20,000 | 1,000 ₹5,000 | 1,000 ₹5,000 |
| 6.00Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armored aluminum conductor cable complete all as specified and directed by Engr-in-Charge of following size :- | |||||||||||
| 6.01 | 95 Sqmm 3 core. | 6 | Each | 3,500 ₹21,000 | 1,450 ₹8,700 Lowest | 2,000 ₹12,000 | 2,200 ₹13,200 | 1,500 ₹9,000 | 3,000 ₹18,000 | 4,000 ₹24,000 | 5,000 ₹30,000 |
| 6.02 | 120 Sqmm to 185 Sqmm, 3 core. | 8 | Each | 3,500 ₹28,000 | 1,450 ₹11,600 Lowest | 2,000 ₹16,000 | 2,200 ₹17,600 | 1,500 ₹12,000 | 3,000 ₹24,000 | 4,000 ₹32,000 | 5,000 ₹40,000 |
| 6.03 | 240 Sqmm to 300 Sqmm 3 core | 8 | Each | 3,500 ₹28,000 | 1,450 ₹11,600 Lowest | 2,000 ₹16,000 | 2,200 ₹17,600 | 1,500 ₹12,000 | 3,000 ₹24,000 | 4,000 ₹32,000 | 5,000 ₹40,000 |
| 7.00Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armored aluminum conductor cable complete all as specified and directed by Engr-in-Charge of following size :- | |||||||||||
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
7 Jul 2025, 6:00 pmClosed
GE UTILITY ELECTRIC SUPPLY
GE UTILITY ELECTRIC SUPPLY DELHI CANTT-10
REPAIR / MAINTENANCE OF 11/.415 KV DAMAGED CABLE AND ELECTRICAL BREAK DOWN INCLUDING FAULT DETECTING, LOCALIZATION, RECTIFICATION WORK IN 11/.415 KV UNDERGROUND CABLES OF KARAM VIHAR MAP, 285 FD WKSP, TIGRISH ROAD MAP, SUMARAN LINE, NPG LINE, MAUDE L
2025_MES_711328_1
GE ELECT/D-30/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE UTILITY ELECTRIC SUPPLY
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE UTILITY ELECTRIC SUPPLY
₹98,000
Yes
29 Sept 2025
30 May 2025
10 Jul 2025
30 May 2025
7 Jul 2025
23 Jun 2025
Amount
Testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 11 KV HT cables of different sizes from both ends, removal of Fault, Re-connections and testing of cables after removal of fault complete all as specified and directed by Engr-in-Charge.. Note: (a) 11 KV HT cable & joints shall be measured and paid for separately under respective items of schedule. (b) Retrieved old serviceable cable cover will be laid in trenches for cable protection. If extra PCC cover and sand required at site shall be measured and paid separately under respective items of BOQs. (c) Excavation and earth work will be measured and paid for separately under respective items of schedule.
All as per item Ser No 1 here in before but 1100 Volt LT cables complete all as specified and directed by Engr-in-Charge.
Taking out faulty underground 1100 Volt LT cable of different sizes by excavation and removing bricks/cable covers of any size and relaying in the same trenches or re routing after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks/cable covers as required. Note: (a) 1100 Volt LT cable & joints shall be measured and paid for separately under respective items of schedule. (b) Retrieved old serviceable bricks/cable covers will be laid in trenches for cable protection. If extra bricks/PCC cable cover and sand required at site shall be measured and paid separately under respective items of BOQs. (c) Excavation and earth work will be measured and paid for separately under respective items of schedule.
All as per item Ser No 3 here in before but 11000 Volt HT cables complete all as specified and directed by Engr-in-Charge.
Material and labour for disconnecting faulty /burnt end or portion of cable by removing the cable from loop including necessary excavation & earth work , suitable size of thimble LT tap , relaying and reconnecting the cable by removing faulty/burnt portion of cable and preparing fresh terminals for 25 Sqmm 3.5/4 core to 240 Sqmm 3.5 core of LT cable to LT Panel/pole/main switch complete all as specified and directed by Engr-in-Charge.
Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armored aluminum conductor cable complete all as specified and directed by Engr-in-Charge of following size :-
95 Sqmm 3 core.
120 Sqmm to 185 Sqmm, 3 core.
240 Sqmm to 300 Sqmm 3 core
Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armored aluminum conductor cable complete all as specified and directed by Engr-in-Charge of following size :-
95 Sqmm 3 core.
120 Sqmm to 185 Sqmm, 3 core.
240 Sqmm to 300 Sqmm 3 core
Supply and fixing of Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armored aluminum conductor cable complete all as specified and directed by Engr-in-Charge of following size :-
95 Sqmm 3 core.
120 Sqmm to 185 Sqmm, 3 core.
240 Sqmm to 300 Sqmm 3 core
Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for cable PVC/XLPE insulated armored heavy duty aluminum conductor 1100 Volts grade complete all as specified and directed by Engr-in-Charge for the following sizes :-
25-50 Sqmm x 3.5 core/ 4 core
70-185 Sqmm x 3.5 core
240-400 Sqmm x 3.5 core
Material and labour for excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and leveling of bottom surface to required level all as specified and directed by Engineer- in- Charge.
Material and labour for returning filling in, including spreading, leveling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.
Material and labour for removing excavated material (i.e. soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.
Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and directed by Engr-in-Charge. Note : Measurement shall be taken after punning down.
Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1, flat size 300mmx 180mm x 40mm. complete all as specified and directed by Engr-in-Charge.
All as per srl item No 14 here-in-before but using old cable cover obtained under srl item No 14 here in before complete all as specified and directed by Engr-in-Charge.
S&F of sub class B bricks having minimum compressive strength 75Kg/Sqcm laid in trenches for cable protection etc complete all as specified and directed by Engr-in-Charge.
All as per srl item No 16 here-in-before but using old bricks obtained under srl item No 26 here in before complete all as specified and directed by Engr-in-Charge.
Supplying, laying, jointing testing and connecting in replacement XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) with multistranded aluminum conductors, 11 KV grade, IS 7098 marked, suitable for HT 11 KV(E) system, laid in trenches / ducts / encased in GI pipe / fixed to pole, including jointing & testingcomplete all as specified and directed by Engr-in-Charge of following sizes :-
95 sqmm 3 core.
120 sqmm 3 core.
150 sqmm 3 core.
185 sqmm 3 core
240 sqmm 3 core
300 sqmm 3 core
Supply, laying, jointing, testing and commissioning in replacement LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armored, with multistranded aluminum conductors, IS-1554 marked, laid in trenches complete all as specified and directed by Engr-in-Charge of the following sizes:- Note :- Excavation, earth work, cable protection, sand fillings, cable joint shall be measured and paid separately.
16 Sqmm 4 core
25 Sqmm 4 core
35 Sq mm 3.5 core.
50 Sq mm 3.5 core.
70 Sqmm 3.5 core
95 Sqmm 3.5 core
120 Sqmm 3.5 core
150 Sqmm 3.5 core
185 Sqmm 3.5 core
240 Sqmm 3.5 core
300 Sqmm 3.5 core
Material and labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 80 to 100 mm bore and making good both ends complete all as specified and directed by Engr-in-Charge.
S&F in replacement GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engr-in-Charge of following bore sizes :-
S&F of cable route indicator made of RCC (Nominal Mix) type B0 1:2:4 (12.5mm graded stone aggregate) with 8mm TMT Bar 150mm c/c of size 1m height X 60cm wide X 10cm thick tapered on top, visible above ground, duly painted with synthetic enamel paint of yellow colour base and letters with black paint. The description for writing for HT cable 33 /11KV as directed by Engr-in-charge complete all as specified and directed by Engr-in-Charge. NOTE:- Sample kept in Engr-in-Charge's office. Note : Rate for PCC 1:3:6 for foundation (min size 0.8mx0.3mx0.3m) of aggregate size 20mm including necessary excavation & earthwork for cable route indicator shall be deemed to be included in the item.
Material and labour for cutting and removing grass, vegetation bushes etc from surrounding 4 pole/6 pole, Transformer, LT panels, in and outside area of HT/LT Sub stn and removing all rubbish to a distance not exceeding 50 m complete all as specified and directed by Engr-in-Charge.
M&L for testing, setting & co-ordination of relay parameters consideration with incoming and outgoing feeders including following tests and setting complete as detalis mentioned as under :- (i) testing of following relays of control panel with secondary injection kit checking and programming of realy (ii) OVER CURRENT IDMT with pick upsetting ,TMS ,CTR <fault current ,Operating time setting (iii) Over current IDMT with I>>,Td,I>>>,Td setting (iv) Earth fault DMT IDMT with pick up setting ,TMS,CTR fault current operating time setting (v) Earth fault DMT with I>>,Td,I>>>,Td setting
Material and labour for re-painting of existing transformer/RMU GI fencing of any sizes with apply of 2 coats of aluminum paint including rubbing with wire brush/emery paper to fencing and angle irons, at different location after disconnecting of HT supply from incoming and LT supply complete all as specified and directed by Engr-in-Charge.
Material and labour for spreading of stone aggregate of nominal size not more than 25mm under 4/6 pole HT structure /surrounding area of outdoor RMU manually without damaging any equipments, cable or parts, spreading & leveling of finished gravel uniformly in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and directed by Engr-in-Charge.
Note : Contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge
Rajindera Enterprises (BID ID -3340353)
KISHORE ENTERPRISES (BID ID -3340807)
DS CONSTRUCTION (BID ID -3340647)
M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3340694)
mayur enterprises (BID ID -3334351)
M/s JAIMAA ASSOCIATES (BID ID -3342142)
Vijay Electricals (BID ID -3341134)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .