Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED | |
| 2 | L2₹17.3 L+₹1.1 L (6.48%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical ABSENT DURING PRE-BID MEETING | |
| 4 | Rejected-Technical | - | Rejected-Technical ABSENT DURING PRE-BID MEETING | |
| 5 | Rejected-Technical | - | Rejected-Technical WORK EXPERIENCE NOT FULFUILLED |
Tender Value
₹20.0 L
EMD Value
₹40,000
Closing Date
1 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DIVISIONAL FOREST OFFICER
DIVISIONAL FOREST OFFICE VAN BHAVAN NAVIN NAGAR DIGLIPUR
Construction of Protection Camp at Karen Basti Coffee Dera Beat Diglipur Range
2023_DFODP_9013_1
DFO/DP/2023/07
Open Tender
Construction Works
Works
60 days
DIGLIPUR
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹40,000
CHAMBER OF DIVISIONAL FOREST OFFICER DIGLIPUR
14 Mar 2023
23 Jan 2023
1 Feb 2023
23 Jan 2023
1 Feb 2023
23 Jan 2023
27 Jan 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
Providing and laying hollow cement concrete blocks walling 150 mm thick consisting of hollow block size 400mm x 150mm x 200mm of mix 1:3:6 (1 cement , 3 course sand and 6 graded stone aggregate 10mm nominal size ) having a crushing strength of 3.5 N/mm^2 at 28 days as per IS 2185 (PART 1 ) 1979 laid in cement mortar 1:3 (1 cement, 3 coarse sand) complete.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring , shuttering , finishing and reinforcement - All work upto plinth level.
1:1.5:3 ( 1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Centring and shuttering including strutting, propping etc. and removal of form for:
Foundation, footing, bases of columns, etc. For mass concrete.
Suspended floors, roofs, landings, balconies and access platform
Shelves ( cast in situ )
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo- Mechanically treated bars of grade Fe - 500D or more
Reinforced cement concrete work in walls (any thickness), including attached pilasters buttresses, plinth and string coures, fillets, columns, pillars, piers, abutments, posts and struts, etc. above plinth level upto floor five level,. Excluding cost of centering, shuttering, finishing and reinforcement:
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1 coarse sand : 1.5 graded stone 3 aggregate 20 mm nominal size).
Providing wood work with Cat-I(A)/Local Teak in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Providing and fixing GI. grills of required pattern in frames of windows etc. with GI angle etc.
Fixed to openings /wooden frames with rawl plugs screws etc.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm sliding bolt
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
200x10 mm tower bolt DOOR
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm almunium handle
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
single rubber stopper
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
1 : 4 ( 1 cement : 4 fine sand )
1:6 (1 cement : 6 fine sand)
Finishing wall with water proofing cement paint of required shade:
Two or more coats applied @ 3.84 kg/10sqm.
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
Two or more coats on new work
Applying priming coat :
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
Vitreous China Wash basin size 630x450 mm with
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe 32mm dia
Stainless steel kitchen sink with drain board 510 x 1040 mmbowl depth 250 mm
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
Providing wood work in making wooden truss with locally available Cat II(A) superior hard wood
Providing and fixing bolts including nuts and washers complete.
Providing corrugated Aluminium sheet roofing sheet.
0.71 mm thick
Providing of roofing screw 2.5"
Aluminium Ridges Plain (600mm)
Transportation cost of Raw Materials to work site
AJAY KRISHNA BISWAS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .