Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹33.2 L+₹1.6 L (4.97%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 3 | L3₹33.8 L+₹2.2 L (6.96%)Rejected-AOC | L3 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 4 | L4₹34.0 L+₹2.4 L (7.49%)Rejected-AOC NO 36 MARAGATHAM STREET SAKTHI NAGAR NAGALANMAN NAGAR JOTHI NAGAR POST ARAKKONAM VELLORE TAMIL NADU 631003 | ARAKKONAM | VELLORE | TAMIL NADU | 631003 | L4 | Rejected-AOC REJECTED DUE TO NOT BEING L1 | |
| 5 | L5₹36.5 L+₹4.9 L (15.6%)Rejected-AOC | L5 | Rejected-AOC REJECTED DUE TO NOT BEING L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M NAS Arakkonam
Garrison Engineer M NAS Arakkonam 631006
COMPREHENSIVE DAY TO DAY FOR BR AND EM MAINT SERVICES IN ZONE B OTM AND INLIVING BUILDINGS AT INS RAJALI NAS ARAKKONAM
2024_MES_653090_1
8368E8
Open Tender
Civil Works
Item Rate
365 days
Garrison Engineer M NAS Arakkonam
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer M NAS Arakkonam
₹80,000
Yes
1 Jul 2024
16 May 2024
24 Jun 2024
16 May 2024
21 Jun 2024
30 May 2024
Amount
Petty repairs to joinery works such as easing of doors/ windows/ kitchen cabinets , refixing builder hardware gauze etc by providing glue nails and screws and rectifying other misc minor carpentary works complete all as specified and as directed.. Note :(i) Replacement of builders hardware if required shall be measured and paid separately.
Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps/ pillar taps/ mixers/ stop cocks etc. by tightening and providing washer, repair to float valves, low leveled cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site complete all as specified and as directed. Note : (i) Replacement of fittings and fixture like Bib tap, stop cock, Pillar Tap etc. if required shall be measured and paid separately.
Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
Taking shutters of any description exc 1 sqm and n exc 2 sqm all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.
S & F powder coated anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.
S & F powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed
S & F powder coated anodized aluminium grill of 8mm x 8mm bars size of opening 10 cms size mesh with aluminium channel 'F/U' angle / channel aluminium frame work all as specified and as directed.
Supply and fix PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-charge.
Supply and fix factory made solid panel PVC moulded door shutter, 28 to 30 mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, in frame at site complete all as specified and as directed by Engr-in-charge.
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butt hinges, hold fast, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 105x60mm incl bottom of each chowkat complete all as specified.
S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, hold fast, Butt hinges, lock strike plate, including PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, including PCC 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified.
S&F second class hard wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
Material and labour for 30 mm thick flush shutters, solid core construction, with block board core and covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and as directed by Engr-in-charge.
S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.
S & F 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.
S & F 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
S & F door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.
S & F 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.
S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
Material and labour for preparation of new steel surfaces over 10 cm girth and applying two coat of synthetic enamel painting over a coat of zinc primer complete all as specified and as directed by Engr-in-charge.
M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.
S & F in repairs 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.
S & F in repairs 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.
S & F in repairs door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.
S & F in repairs 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.
S & F in repair 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
Hacking out old broken glass any thickness size quality or description including punching or drilling out old glazing fixing sping /clips all as specified and as directed by Engr-in-charge.
S & F 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.
S & F 4.8mm thick plain sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares exc 0.50 sqm in each pane complete all as specified and as directed.
S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.
S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.
S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.
Material and labour for repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in partition/ pelmet box with nails to timber frame work complete all as specified and as directed by Engr-in-charge.
All as per item No.34 here-in-before but 18/19mm thick in shutters of shelf/ cabinet complete all as specified and as directed by Engr-in-charge.
Material and labour for 6mm thick teak wood lipping to 19mm thick particle board fixed with nails complete including varnish finishing etc., complete all as specified and as directed by Engr-in-charge.
All as per item No.36 here-in-before but for 12mm thick board.
S & F in repairs continous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 30mm complete all as specified and as directed by Engr-in-charge.
S & F in repairs locks, cupboard, grade I, size 50 mm with 2 levers complete all as specified and as directed by Engr-in-charge.
S & F in repairs 75mm size hasp and staple, mild steel, wire type, stone enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-charge.
S & F in repairs 40mm dia cub board knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and as directed by Engr-in-charge.
Taking up or down 15mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.
Taking up or down 20mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.
Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.
Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.
Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.
S&F 20mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
S&F 25mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
Dismantling PVC water tank of capacity exc 250 Ltrs and n.exc 500 ltrs and removing complete all as specified and as directed by Engr-in-charge.
Dismantling PVC water tank of capacity exc 500 and n.exc 1000 ltrs and removing complete all as specified and as directed by Engr-in-charge.
S & F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I
S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I.Make: Prayag or equivalent model.
S & F 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I.Make: Prayag or equivalent model.
S & F for 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F in repairs 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight-142 gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F in repairs 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete (Minimum weight-210 gms) all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F in repairs flexible PVC waste pipe suitable for wash hand basin and Kitchen Sink all as specified and as directed.Make: Prayag or equivalent model.
S & F in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets connecting union overall size 914x460x203mm with bowl size 405x354x203mm fixed complete all as per Cat No 1239D of Prayag or equivalent as specified and as directed by Engr-in-charge.Make: Prayag /Blue star.
S & F in repairs Bib tap 15 mm bore, brass, chromium plated, with crutch or butterfly handle conforming to IS as per Cat No.CON-037KN of Jaquar or ESSCO or G1404A1 of Parryware or equivalent of KOHLER screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed.
S & F in repairs Angular stop cock 15mm bore, brass, chromium plated, conforming to IS as per Cat No.CON-053KN of Jaquar or ESSCO or G3053A1 of Parryware or equivalent of KOHLER , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.
S & F in repairs Pillar tap 15 mm bore, brass with capstan heads, chromium plated, long Neck with aerator conforming to IS as per Cat No.CON-021KN of Jaquar or ESSCO or G2402A1 of Parryware or equivalent of KOHLER, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.
S&F in repairs 15mm bore Bib tap of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S&F in repairs15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S&F in repairs 15mm bore Stop valve with long shank and cup (concealed type) of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S&F in repairs 15mm bore angle stopcock PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S&F in repairs 32mm Waste coupling suitable for urinals of PTMT (half or full threaded) . (Minimum weight 32mm-45gms) complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F in repairs 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge.Make: Prayag or equivalent model.
S & F Over head shower rose with arms, ABS body chromium plated with revolving joint and 125 mm dia round shaped single flow with rubit cleaning system all as per Cat No.OHS-1989 of Jaquar or equivalent of CERA / ESSCO/Parryware / Kohler all as specified and directed.
S & F in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge. Make:Prayag/Parryware/Johnson/ Kohler/Marc
S & F in repairs 19mm dia curtain rails, anodised aluminium alloy with fixing brackets, stops rollers etc., complete all as specified and as directed by Engr-in-charge.
S&F in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge.Make:Jaquar/ESSCO/CERA/Parryware
S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.
S & F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.Make: Parryware /Essco/Jaquar/CERA.
S & F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).Make: Parryware /Essco/Jaquar/CERA.
S & F in repairs vitreous china wash down water closet pedestal pattern white including trap connections to drain and to flush pipe anti-syphonic pipe etc., complete all as specified and as directed by Engr-in-charge.
S & F in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge.Make: Parryware /Essco/Jaquar/CERA.
S & F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-charge.Make: Parryware /Essco/Jaquar/CERA/Prayag
Supply and fix in repairs PVC connection 600mm long with two PTMT nuts complete all as specified and as directed.
Supply and fix in repair of flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and as directed.
Supply and fix for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc., of 110mm dia complete all as specified and as directed.
All as per item No.83 here-in-before but 75mm bore.
Supply and fix for PVC (SWR) bends/ shoes with Access door any radius of 110mm dia complete all as specified and as directed.
All as per item No.85 above but 75mm bore.
Supply and fix for PVC (SWR) (Single T) any radius provided with access door of 110mm dia complete all as specified and as directed.
All as per item No. 87 above but 75mm bore.
Supply and fix for PVC (SWR) branch pieces, single Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed.
All as per item No.89 above but 75mm bore.
Supply and fix for PVC (SWR) branch pieces, double Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed.
All as per item No. 91 above but 75mm bore.
Supply and fix for 110mm PVC (SWR) vent cowl complete all as specified and as directed.
All as per item No. 93 above but 75mm bore.
Repairs to steel window / Door including cleaning, oiling / greasing of hinges, removal of rust, necessary welding works, refixing etc and rectifying other misc minor repairs etc complete all as specified and as directed Engr-In-Charge.
Supply and fix in repairs closed top cover for water tank of any capacity and any type with locking arrangement complete all as specified and as directed.
S&F in repair for syphonic action rod (complete kit) with float valve for low level cistern and make serviceable in all respect complete all as specified and directed by Engr in Charge
S & F in repairs, 15 mm dia brass spindles (heavy) suitable for bib taps/stop cocks/pillar tap, for existing make complete all as specified and as directed
M & L for 12 mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including, SS handles, mortice lock, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.
Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.
Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells
One light point controlled by one switch.
One fan point controlled by one switch.
One Exhaust fan point controlled by one switch.
One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.
One 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.
One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.
All as per item ser no-2 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza/Havells
Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/ conduit/ fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza.
One light point controlled by one switch.
One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.
All as per item ser no-103 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza
M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.
2x 4.0 sqmm and 1x 4.0 sqmm as earth wire
2x 6.0 sqmm and 1x 6.0 sqmm as earth wire
S&F in repair for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S&F in repair for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S&F in repair for switch piano, flush type single pole , two way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S&F in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S&F in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S&F in repair for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader
S & F in repair stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.
Supply and fix high efficiency wall mounted LED batten type polycarbonate tube not less than18W 4 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed. Make: CAT Crompton LT8-20-865-(2)/ Havells/ Surya/ Philips/ Wipro.
Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP66 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Make Surya/Havells/Philips/CROMPTON.
S&F sheet metal enclosure Horizontal TPN DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCB's (ii) MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB.
S&F MCB,DB SPN 04 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.
S&F MCB,DB SPN 02 way in SS enclosure type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.
Supply and fix for MCCB 4 Pole, 415 V, Fixed thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB, Note : Including taking down old unserviceable.
Supply and fix for MCCB 4 Pole, 415 V, Fixed Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 16 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.
Supply and fix for MCB TP 415 V, 25-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.
Supply and fix in repair for MCB TPN 415 V, 40-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.
Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.
Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.
S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB
Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.
M&L for GI Pipe 15 mm light grade galvanised, with all fitting laid in trenches all as specified and directed
M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.
Supply and fix for high efficiency 24 watts 2 x 2 sqft LED light with panel for recesssed mounting dust free installation with high brightness LEDs for glare free homogenous illumination andsuitable for ceilling cut out 600 x 600mm complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make:- Crompton Cat No. LCTLRNE-24-FO-CDL /Surya/ Philips/Wipro
S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader/plaza/AKG
Supply and fix ceiling fan 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton/Bajaj/Usha
Supply and fix BEE Rated LED Lamps 14W - B22/ E27 including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge. Make Crompton/Bajaj/Usha
Supply and fix Exhaust fan 300 mm Sweep, 230 volts,50Hz of Orient or equivalent of Crompton/Bajaj/Usha
Green Ray Technologies
VKR ENTERPRISES
R.P.TRADERS
CRJ ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .