SPECIAL REPAIR TO BLDG NO P-62 OF 271 TRANSIT CAMP AT MIL STN KALKA UNDER GE JUTOGH

Amount

Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 5 mm thick on brick or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of 1-2mm wall care putty complete all as specified and directed.

M&L for preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for preperation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying 1-2 mm thick wall care putty as per manufacturers instructions and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old surface and applying two coats of oil bound distemper on walls complete all as specified and directed.

M&L for complete removal of existing treatment from wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old treated plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces of roof finished even and smooth without using extra cement mixed with and including water proofing compound of approved make as per manufacturers instructions complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for roof treatment, cleaning of old roof slab surfaces including sweeping clean &washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:- (a) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 Ltr/sqm (b) Applying bitumen @1.20kg/sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required and dorected. (d) Applying aluminium paint @ 0.20Kg/Sqm.

Dismantling, floor, hearth or wall tiling/terrazo toping including cement mortar bedding,backing coat and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) and removing rubbish off the premises to a distance n exc 50 m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L vitrified tiles of approved dark shade and pattern, cut from 600mm x 600mm x 9-10mm thick tiles joint less as in skirting set and jointed in cement slurry, over 10mm thick backing coat in cement mortar (1:4) and pointed. in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L vitrified tiles of approved dark shade and pattern, of size 600mm x 600mm x 9-10mm thick joint less as in floor set and jointed in cement slurry, over 15mm thick screed bed in cement mortar (1:6) and pointed. in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado and riser to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat with cement mortar 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic colored tiles on verticle surface such as skirting/dado etc. 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match to coloured tiles, fixed over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles glossy finish 30cmx30cmx20-25mm thick, with PVC moulding set jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F in repair 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like over and including screed bedding in cement mortar (1:4) with nosing including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M &L for 50 mm thick, PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M & L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks of 500 ltr capacity 3 layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed in SSR Part-I complete all as specified and directed.

S&F in repair ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

Taking down chowkats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised,barrel tower bolts of extruded section.hinges complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrunded sections and fixing bolt and sliding bolt of extrunded sections or cast aluminium alloy complete all as specified and directed.

S & F 125 x 60mm size pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

S & F 105 x 60mm size pressed steel frames for door with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in bed block for fixing hold fast complete all as specified and directed.

S & F IInd class hard wood 35mm thick factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venerred particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated for doors incl one shop coat of primer complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed & skeleton shutters,open rebated & prepare to receive gauge, divided into squares, with plain, chamfered and rounded, mitred and rebated sash bars, any numbers members of shutters as specified SSR Part-I , clause 8.24(a) complete all as specified and directed.

S & F aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side plain/colour glass and PVC composite board 5mm thick fixed with aluminium clip beeding. door section of aluminium door shutter as under complete and all as specified and directed (i) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7mm thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER (x) Hold fast aluminium 100mm long (xi) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door (Note: PVC/rubber lining brush for alround door shall be provided)

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including mosquito proofing net and 5 mm thick plain/colour glass , size of frame 91.50 x 31.75 x 1.3mm thick for top and sides, and bottum and shutter frame 38 x 18 x 1.5mm thick, including necessary handles,jointing cleats,glazing clip,rubber packing and locking arrangement etc. complete all as specified and directed.

S&F aluminium section powder coated of colour as approved for partition consisting of with Frame 62x40x2mm and partially glazing with 5.5mm thick plain/ colour glass and partially with PVC composite board 5mm thick fixed with aluminium beading, joining cleats, glazing clips 0.7mm thick, rubber packing complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded to received the glass complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded to received the wire mesh complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Hacking out old broken glasses (any thickness size quality or description) from metal or wooden frame incl punching or drilling out old glazing pins spring clips & providing and fixing new pins complete all as specified and directed.

S& F 3 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and fixed with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S& F stainless steel wire cloth 0.36mm nominal dia or wire and average width or apeture 1.40mm and fixed with stainless steel wire staple in complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm each and re-fixing in the same opening after necessary repair complete all as specified and directed.

M & L for preparation for old or previosuly treated wooden surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic ename paint complete all as specified and directed.

M & L for preparation for old or previosuly treated steel surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic ename paint complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 15mm bore complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re - fixing old steel tubing 15 mm dia and connections with new fittings in old or new positions, complete all as specified and directed.

Taking up or down steel water tubing and connections incl cleaning for refixing or removal from site of 20mm bore pipe complete all as specified.

S & F 20 mm bore galvanised steel water tubes medium grade with all fittings and fixed to walls and ceilings or laid in floor complete all as specified and directed.

Re - fixing old steel tubing 20 mm dia and connections with new fittings in old or new positions, complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 600 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed.

S&F brass CP mixer with Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore complete all as spd

S & F in repair stop valve of 15mm bore cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crtuch or butterfly handle capstan head screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy with crutch or butterfly handle with chromium plated screwed down for iron pipe complete all as specified and directed.

S & F in repair 15 mm bore brass chrominum plated shower rose 100mm size with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair wash down water closet (pedestal pattern) vitreous china white including sheet cover, jet, connection to drain or out going pipe and to flushing pipe anti-syphonage pipe incl. stainless steel jet pressure complete all as specified and directed.

S & F in repair PVC valve less syphonic action type low level flushing cisten of 10 litres capacity white with inlet hall ball valve float side handle incl brackets incl PVC flush pipe of 32mm dia 90cm long for low level fixed to squat pattern closet incl all joints and making good the floor complete all joints and making good to floor, complete all as specified and directed.

S & F 15mm bore PVC water connection 450mm long with brass nuts and fitted complete all as specified and directed.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) complete all as specified and directed.

S&F Tubler towel rail, 20mm dia D type 60 CM long between flanges complete all as specified and directed.

M & L 18/19 mm thick Pre laminated particle boards, Exterior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed with screws to timber frame work for cup Boards, pelmets etc. complete all as specified and directed.

S&F teak wood lipping, 6mm thick, over 18/19mm thick board fixed with nails complete all as specified and directed.

S & F magnetic catcher for Cup board shutter of brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and waser of mild steel,bright finished complete all as specified and directed.

M & L for preparation of new or previosuly untreated wooden surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and incl one coat of pink primer complete all as specified and directed.

M&L for IInd class hard wood plain fillets, cross sectional area exe 3 Sq.cm. & n exc 6 sq. cm , square, rectangular in section clean sawn, secured with nails or brads complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flap, mild steel, bright finish or electro galvanised complete all as specified and directed.

Demolition of reinforced cement concrete of shelves or chajja n.exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for RCC 1:1.5:3, (nominal mix) type A1 using 20mm graded crushedb stone aggregate as in chajjas/Shelves complete all as specified and directed.

Use and waste formwork to chullah hoods, chajjas,shelves , troughs and similar items including edges for rough finish surface complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen or laboratory with plug , washers waste pipe , cast iron cantilever brackets , connecting union overall size 915mm x 460mm with bowl size 410xmm x 330mm x160 mm with all acessories including cantilever brackets & PVC waste pipe incl dismentling existin china ware kitchen sink complete all as specified and directed.

S&F floor 150 mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.

S&F in repair 25 mm thick drapery rod ,mild steel,powder coated with fixing brackets ,end knobs ,stop, etc. Complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes double socketd, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes double socketd, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access door complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore with access door complete all as specified and directed.

S & F Salt glazed stoneware gully trap 125x100mm square or round mouthed type P setting and jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Cutting holes in brick walls exc. half brick but not exc. one brick built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, Type B-1, as required complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m deep along the existing sewage lines carefully for replacing/taking out SGSW pipe for puncturing of lines for cleaning and getting out in hard/dense soil complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Demolition and breaking up drain pipes 150mm dia (SGSW/AC/PVC or re-inforced concrete pipe) set in cement mortar including concrete bed to drain pipes, complete all as specified and directed.

M&L for salt glazed stoneware drain pipes of 150mm bore, laid in trenches and jointed complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M&L for precast cover slab using RCC 1:2:4, Type B-1, using 20 mm graded crushed stone aggregate for man holes set in CM 1:4 complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with modular box and cover plate of suitable size including non metallic PVC conduit medium grade with fixing accessories, to be fixed with pressed steel concealed terminal boxes covered incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification, complete all as specified and directed for following:-

One light/ fan point controlled by one switch complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board complete all as specified and directed.

One bell point controlled by one push button switch complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and 2.5 Sq mm size PVC insulated stranded copper conductor as earth continuity conductor complete all as specified and directed.

S & F modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified

S & F modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S & F modular socket, 6 Amp, 2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F lamp holder pvc body with back plate with and including 9/10 Watt LED lamp complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F in replacement of sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

S&F MCB TPN 40 to 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SPN 32 Amps 250V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB SP 6-32 Amp ,240 Volt complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn in and incl PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring all as specified. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings complete all as specified and directed. Make :Havells cat part No RUGBYNEONFT10WLED860SSYMTOPC/ Polycab Cat Part No. PLT0101316/ Crompton Cat Part No. LBH-10-CDL.

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed. Make : Havells Cat part No ENDURALINEARNEOBS20WLED840SPCWH/ Polycab Cat part No LDO0103023/ Crompton cat part No LCCLB-24-CDL/ Bajaj Cat ref BCLSBAL 20W CW.

S & F LED tube light along with fixture, 10W(2 feet, mirror light) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : Havells Cat part No ENDURALINEARNEOBS10WLED865SPCWH/ Polycab Cat part No LDO0103021/ Crompton cat part No LCCLB-08-CDL

S&F in replacement LED Street Light Luminaries 45 watt fitting with driver having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V, including GI brackets with nuts and bots of suitable size ,making connection from ceiling rose to LED light fitting with suitable cable size for connection complete all as specified and directed. Make :-CROMPTON Cat no - LSTS-45-CDL-1/ Bajaj Cat No BRTFG 45W LED I / Polycab Cat No PCGLS T1 45 N.

S&F in repair LED Post top 40 watt decorative type,made of cast aluminium with decoratice opal polycarbonate diffusar with IP-65 protection including fixing with suitable size GI pipe as required on the top of gate pillar including all fixing accessories with MCB DB 2 way with Suitable MCBs and control wiring from DB to fittings complete all as specified and directed. Make :-Crompton cat no. LPTO-40-CDL/ Bajaj Cat ref BGCL 40W LED WH/ Polycab Cat ref PCGLP 01 40 0/ Havells cat ref RUBYPT35WLED757PSYMTOPC

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth and getting out in hard / dense soil oil for laying cables and complete all as specified and directed.

Supply, laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core , complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40 mm dia confirming to IS , approved colour complete with fittings for cable protection complete all as specified and directed.

AAR PEE ENTERPRISES

m/s jupiter builders

NAVREET CONSTRUCTION

R. P. Suppliers and Construction Co.

VARUN TRADERS

M/S Jaswant Kumar Aggarwal