REPAIR/MAINT OF STROM WATER DRAINS INCLUDING REPLACING OF DAMAGED BRICK LININGS AT MES/BASRA/IN-LIVING AREA AND REPAIR/MAINT OF WALLS INCLUDING REPLACEMENT OF CONCERTINA COILS AND FENCING REPAIRS AT MES/BASRA AREA AND REPAIR/MAINT OF SEWAGE NETWOR

Amount

Cleaning of all types of blockage of Nahni traps/floor traps/bottle traps, blockages of WC's, rain water pipes and similar works, complete all as specified and directed. Note :- 1. Labour shall be provided by the contractor on daily basis from 9:00 AM to 5:00 PM incl all Tools and Plants. Each labour shall entertain complaints everyday in working hours. 2. The supervisor of Contactor shall take all complaints from the Complaint Cell and do the all on same day. 3. Feedback shall be given by the contractor/supervisor to concened JE from all aspect on the same day.

Cleaning/clearing of sewage line (including manholes) 100mm to 350mm bore of any description under ground any depth, removing any type of blockage including desilting, descaling and de-chocking from drain manually or combined high pressure water jetting cum suction (vacuum) type machine having facility of high pressure vacuum including provision of hydraulic application through high pressure thermoplastic fiber based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning including clearing of manhole, sludge water shall be disposed of directed, complete all as specified and directed. (Note : The quoted rate shall deemed to be included removing of manhole cover and refixing the same after cleaning.)

Dewatering/Desludging & cleaning of manhole of any depth, any size, taking out water mixed with sludge and solid sludge including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20 meter in a ditch including necessary excavation of pits and covering with earth & spraying unslaked lime on the covered ditch as well as around the manholes to make hygienic including necessary flushing of manholes with water after desludging, complete all as specified and directed.

Bailing out the sludge water including other foreign materials from septic tanks / manholes of various sizes and depths as required by manually or by pumping with suitable pumping machinery and removing the same within 50 m distance and deposited in a pit to be excavated and covered with two layer of bamboo mating, disinfecting the pit with sufficient quantity of bleaching powder and earth filling upto 30cm depth of pit including removing and refixing of manhole covers as required, complete all as specified and directed. Note: (i) Excavation and earth work for pit, bamboo matting, temporary barricade of the pit and providing sufficient bleaching powder shall deemed to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid on this account.

Taking out/Bailing out the sludge / semi solid materials including other foreign materials from septic tanks / manholes of various sizes and depths upto 1.5m as required by manually or by pumping with suitable pumping machinery and taking out sludge/ semi solid materials / any other foreign materials from septic tanks etc and removing the sludge within 50 m distance and deposited in a pit to be excavated and covered with two layers of bamboo mating and earth filling upto 30cm depth of pit including removing and refixing of manhole covers as required, complete all as specified and directed. Note: (i) The cost of Excavation and earth work for pit, bamboo matting, temporary barricade of the pit and providing sufficient bleaching powder shall deem to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid on this account

Cleaning of soil waste pipe (cast iron/PVC)100mm bore laid in ground any slope or gradient and depth 3 mtr by roding taking out all residue from the lines/manholes including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed

Cleaning of soil waste pipe (cast iron/PVC) above groun level, 75mm/100mm bore by roding, taking out all residue from the lines including water and depositing at a distance not less than 20 mtr in ditch finally covering the ditch with earth and spraying unslacked lime on the covered ditch to make hygienic including excavation of ditch testing of line by flushing water after cleaning etc, complete all as specified and directed.

All as per item No. 7.00 here-in- before but embedded in ground or floor, complete all as specified and directed.

Cleaning/clearing of IWC/ EWC, gully trap /floor trap/kitchen sink including CI pipe / PVC pipe upto first manhole by roding, taking out all residue including waste and testing by pouring water after cleaning, complete all as specified and directed. Note: Cleaning of PVC/CI pipe from first floor / ground floor/ embedded in floor or fixed to wall shall deemed to be included in the unit quoted rate.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house, pole/stay or cble trnches etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing serviceable tiles to store and rubbish off the premishes, complete all as specified and directed.

M& L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for joint free, white non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 630 x 450mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles , complete all as specified and directed..

M&L for brick work with sub class 'B' bricks old size, burnt clay bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) including demolition of brick work, complete all as specified and directed.

All as per item No. 20.00 here-in-before but except bricks, complete all as specified and directed. Note-(i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition.

M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed

M & L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in manhole/drain slab cover and similar iitems with plain faces and set in CM (1:4), complete all as specified and directed.

S & F mild steel TMT bars 6mm to 8mm dia (not less than Fe-500D grade), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips, complete all as specified and directed.

M & L for PCC (1:4:8), type D 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore, complete all as specified and directed.

M & L for PCC (1:4:8), type D 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 200mm bore pipe, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge etc, complete all as specified and directed.

S&F of 110mm bore size, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed.

S&F of 110mm bore size PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor including dismantling of old unserviceable pipes and fittings, complete all as specified and directed.

S&F of 75mm bore size, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed.

S&F of 75mm bore size PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floor including dismantling of old unserviceable pipes and fittings, complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore, complete all as specified and directed.

S&F PVC (SWR) bends of 75mm bore, complete all as specified and directed.

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 75mm bore, complete all as specified and directed.

S&F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incl bolt and nuts securing ends of stays to wall or roof of 110mm bore, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 25mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S & F 15mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 20mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 25mm bore galvanized steel water tubing and connection, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

S&F in repair 32mm bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F in repair grating doom 125mm dia of PTMT (minimum weight 40 gms), complete all as specified and directed.

S&F in repair grating square 150mm dia of PTMT (minimum weight 100 gms), complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight - 90 gms), complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink 800mm long, complete all as specified and directed.

S&F in repairs for 15mm dia pipe, health faucet (ABS Body) mild steel chromium plated suitable with 1.00 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate as in sub-base, sub floors, pavings, floors etc, complete all as specified and directed

M&L for 75mm thick PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate as in plinth protection/hardstanding etc, complete all as specified and directed

Dismantling fencing wire mesh, of any type including fillets, complete all as specified and directed.

Supply only chain link fencing made out of 4mm dia galvanised iron wire of mesh 75 mm x 75 mm/ 100 mm x 100mm size, made up to into mattress or cages, complete all as specified and directed. (Note : Per meter weight of chain link brought by the contractor shall be finalized through a BOO.)

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provisition of binding wire etc, complete all as specified and directed.

Re-straining and fixing only old seviceable chain link to any type of standards, rails including securing or tying at crossing with and provision of galvanisrd mild steel wire staple of steel pins etc, complete all as specified and directed. (Note : Old serviceable chain link fencing obtained from dismantling shall be re-used.)

M&L for flush pointing to old brick work laid flat in CM (1:4) including racking out joint in floors, surfaces chanels etc, complete all as specified and as directed.

M&L for flush pointing to old brick work laid on edges in CM (1:4) including racking out joint in floors, surfaces chanels etc, complete all as specified and as directed.

Dismantling bricks (laid flat or on edge) laid,bedded and pointed in cement mortar as in floors, channels, kerbs aprons etc (each layer), complete all as specified & directed.

M&L for brick sub class 'B' burnt clay brick, old size, laid flat in drain, bedded and joint in CM (1:6) and pointed in CM (1:3), complete all as specified and directed.

All as per item No. 63.00 here-in-before but except bricks, complete all as specified and directed. Note : (i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition.

M&L for brick sub class 'B' burnt clay brick, old size, laid on edge in drain old size of brick bedded and joint in CM (1:6) and pointed in CM (1:3), complete all as specified and directed.

All as per item No. 65.00 here-in-before but except bricks, complete all as specified and directed. Note : (i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition.

S&F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including MS screws bolts (machine made with hexagonal head exc. 30cm long and dia of neck not exc. 12mm, complete all as specified and directed.

S&F in repair for 960mm dia barb (unstretched) conseczal super razor punched tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing, complete all as specified and directed. Note (i) : No of circles - 51 turns per coil, weight of each coil with hessian pack 13 Kg (+ 0.5), coverage per coil - 8 RM, central core wire :- Made from 2.5mm dia (+ 0.05mm) GI - H.T.S.S wire as per IS -4454 Part l grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanized as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm per Sgm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethane of 2-m micron thick and final paint top coat of certified green shed (BSL 139) by hot dipping process of 15 micron thick, length of barb 23.5mm (+1 mm), width of barb 18.6 mm (+ 1mm), centre to center pitch 36mm (+ 1mm), centre width 7.4 mm (+ 1mm), GI fixing accessories "C" clip 2mm wire diameter, 40mm long, 15mm center dia "U" clip 1mm thick, 28mm straightened length, " J" clip:- 31mm length, 8mm width, 1mm thick. (ii):- Running length of the fencing shall be measured for payment purpose.

S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, fancy type, cast copper alloy, chromium plated, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank and removing from site of work, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank and removing from site of work, complete all as specified and directed.

S&F of in repair 20mm bore ball brass valves, high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F of in repair 20mm bore gun metal gate valve with iron wheel screwed both ends for iron pipes , complete all as specified and as directed.

S&F in repairs 15mm bore, stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends iron pipe or for unions, complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair 15mm bore angular stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, brackets etc, complete all as specified and directed.

S&F in repair sinks made of stainless steel, with draining board, 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F in repair plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP hinging device for pedestal pan, complete all as specified and as directed.

S&F 15mm brass CP mixer for mixing hot & cold water, screwed down for iron pipe and mixed , complete all as specified and as directed.

S & F in repair 15mm bore, stop valves standard of PTMT any colour high pressure screwed for iron pipes and fixed (minimum weight - 90 gms), complete all as specified and directed.

S & F in repair 15mm bore, angle stop valves of PTMT any colour high pressure screwed for iron pipes and fixed (minimum weight - 90 gms), complete all as specified and directed.

S & F in repair 15mm bore pillar taps, of PTMT any colour high pressure screwed iron for iron pipes and fixed (minimum weight - 110 gms), complete all as specified and directed.

S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 142 gms), complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms), complete all as specified and directed

S & F in repair soap dish, viterous china white approximate size 160 x 160 x 90mm fixed with chromium plated brass screws, complete all as specified and directed.

S&F in repairs 125mm chromium plated shower roses with or without swivel joints, any size, including fixing to any type of pipe or union, complete all as specified and directed.

S & F in repair vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm, fixed in floor, complete all as specified and directed.

S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F in reapair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty, complete all as specified and directed.

Resecuring or easing & adjusting without taking off shutter from the frame exc 1.00 Sqm each & n.exc 2 Sqm each, complete all as specified and directed.

Resecuring or easing & adjusting without taking off shutter from the frame n.exc 1.00 Sqm each, complete all as specified and directed.

Resecuring or easing & adjusting without taking off shutter from the frame exc 2.00 Sqm each, complete all as specified and directed.

Taking down shutter, resecuring or easing and adjusting and refixing in same opening. only of any description area but not exc 1.00 sqm, complete all as specified and directed.

Taking down shutter, resecuring or easing and adjusting and refixing in same opening, only of any description area exc 1.00 sqm but not exc 2.00 sqm, complete all as specified and directed.

S&F in reapair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specifiee and directed.

S&F in repair 150mm long aluminium anodised handles, cast type, complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F in repair aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed.

S&F in repair aluminium mortice lock, vertical type, size 75mm (2 levers), complete all as specified and directed.

S&F in repair aluminium mortice lock, vertical type, size 65mm (2 levers), complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm. in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair 25mm dia aluminum anodized drappery rod, powder coated teak wood testure finish and wall thickness 1mm including brackets and end complete designed and patterened as approved, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., compelete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished surfaces fair and even, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over and including 2 to 3mm thick wall care putty to obtain smooth finished surfaces, complete all as specified and directed.

S&F 605x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and providing 4mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid including dismantling of old unserviceable ceiling boards of any description, including cover fillets, complete all as specified and directed.

S&F in repair 4mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws, 60 x 60cm in size, fixed with nails to timber framework or with staples on snap grid, complete all as specified and directed.

Dismantling od asbestos cement corrugated or semi corrugated sheet in roof coverings, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall/ridge etc, fixed with self tapping screws, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 40mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base, flooring etc., complete all as specified and directed.

M&L for machine cut kota stone flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and includging 15mm thick screed bed in CM (1 :6), complete all as specified and directed.

Note for item No. 70.00 to 123.00:- (i) Supervisor will collect the Job cards of complaints from the complaint cell on every official working day and feed back should be given to the complaint cell after completion on same day or within 48 hours. (ii) Each complaint must be completed within 48 hrs from the date of job cards.The complaints which will not be rectified within specified time of 48 hrs, recovery of Rs. 400/- shall be made for each complaint from the amount due to the contractor.

Note: An amount of Rs.51,500.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BIJAY KUMAR SHIVA (BID ID -3308933)

M/S. JOGINDER KUMAR GOYAL (BID ID -3308346)

M/S SARDAR MAL NAHATA (BID ID -3309083)

M/S. KUMAR CONSTRUCTION CO. (BID ID -3308413)

M/S BISHAL ENTERPRISES (BID ID -3308300)

M/S ROY ENTERPRISE (BID ID -3307792)

BHARAT ELECTRIC (BID ID -3307782)