PETTY REPAIR/ MAINT OF EXTERNAL WATER SUPPLY AT KHANPUR ARMY CAMP, MANESAR ARMY CAMP, DUNDAHERA MIL STN AND INDU BINOLA UNIVERSITY UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Labour only for attending day to day external water supply compliants of all nature i.e. leakage in water supply pipe lines,fittings/Fixtures over flow of overhead tank, no water supply two shifts from 0600 hrs to 1400 hrs (1st Shift) and 1400 hrs to 2200 hrs (2nd Shift) including noting the compliants from Khanpur North and South Army camp P/H,Dundahera Mil Station P/H & Manesar Army camp P/H in complaint register and distribution to the tradesman complete all as specified and as directed. (Any material required for attending complaints shall be measured & paid separately under respectvie item no-10.01 to 10.37) Note :- The suitable shift duties as deems fit shall be the decision of the Engr-in-charge

Supply only chloroscope for water testing range of 0.1 ppm to 2.0 ppm complete all as specified and as directed.

Supply only ORTO-TOLUDINE regent solution in 500 ml bottle complete all as specified and as directed.

Supply only ALTOCH-GP high strength calcium based granular disinfectant for chlorination of water complete all as specified and as directed.

Supply only first Aid kit (PVC container) No-3 as per the specification including first aid medical treatment materials complete all as specified and as directed.

Supply only in repair of following items/accessories in existing position complete all as specified and as directed of the following sizes:-

GI union 100 mm bore

GI union 75/80 mm bore

GI union 40/50 mm bore

GI union 20/25 mm bore

GI socket 100 mm bore

GI socket 75/80 mm bore

GI socket 40/50 mm bore

GI socket 20/25 mm bore

GI El bow 100 mm bore

GI El bow 75/80 mm bore

GI El bow 40/50 mm bore

GI El bow 20/25 mm bore

GI End plug 40/50 mm bore

GI End plug 20/25 mm bore

GI Tee 80/50 mm bore

GI Tee 50/40 mm bore

GI Tee 25/20 mm bore

MS Flange 80 mm dia

Nipple 20 mm bore

Nipple 25 mm bore

Nipple 40 mm bore

Nipple 50 mm bore

GI Reducer medium grade 15 mm /20mm

GI Reducer medium grade 20 mm/25mm

GI Reducer medium grade 25 mm/40

GI Reducer medium grade 40 mm/50

GI Reducer medium grade 25 mm/15mm

GI Reducer medium grade 40mm/20mm

GI Reducer medium grade 40mm/25mm

GI Reducer medium grade 50mm/25mm

Gun metal gate valve 20 mm

Gun metal gate valve 25 mm

Gun metal gate valve 40 mm

Gun metal gate valve 50 mm

Float valve 20 mm bore

Float valve 25 mm bore

Lead pig Bar

Spurn Yarn

Nuts, Bolts and Washers 25 to 150 mm long of 6 to 20 mm dia

3mm thick rubber gasket

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under item srl No 07 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Supply & laying of GI steel tubing medium grade of following size in old or new position as in trenches/ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Notes :-(i) Excavation for new location shall be measured & paid separetely. (ii) GI fittings should be measured and paid under respective items.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down GI/CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

100 mm bore

80 mm bore

Refixing/ relaying, jointing and testing old GI/CI/DI tubing of following sizes, retrieved under srl No 11 here-in-before in new or old position at walls,ceiling or floor etc including rejointing of any type of pipeline & providing new GI/CI/DI fittings complete all as specified and as directed. Note :- Excavation,earth work & fittings any type shall be measured & paid separetely.

100 mm bore

80 mm bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- Joints shall be measured & paid separetely.

100 mm bore

80 mm bore

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious,bends,collars,tapers,tail pieces,caps and plugs up to 150 mm bore complete all as specified and as directed.

Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes :- Note:- Spare parts under relevant items shall be measured and paid separately under respective items.

80 mm bore

100 mm bore

150 mm bore

Supply only 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed.

Stem, 80 mm bore

Stem, 100 mm bore

Stem, 150 mm bore

Supply only 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under complete all as specified and as directed.

Stem Nut, 80 mm bore

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Supply only 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under complete all as specified and as directed.

Gland Plate, 80 mm bore

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Supply only 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed.

Material & Labour for Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .

100 mm bore

150 mm bore

Supply and fixing rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down old unsv tank as existing at site (of any capacity) complete all as specified and as directed..

Supply and fixing rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down old unsv tank as existing at site (of any capacity) complete all as specified and as directed.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Preventive maintenance of electric motor driven Chlorine dosing system any make including cleaning of electrode rode , HDPE/FRP tank of capacity up to 100 Ltr tank and checking functioality and performance of level gauge , dosing pump , High pressure single head motor ,pressure gauge, power pack incl oiling and greasing of all moving partscomplete all as specified and as directed. Note : Old unserviceable Spare parts required to be replaced for smooth functioning of work shall be measured & paid separately under respective items here-in-after as supply only.

Supply only of following spare parts for hypodosing system of dosing rate upto 2.88Ltr/Hr at 08 Bar and of power supply 230V, 50Hz , 12W complete all as specified and as directed.

Anatisyphon Valves complete with ball, seal & spring

Ball (PTFE)

Back spring (Large)

Back spring (small)

Cable groumet

Foot valve assembly complete with ball seal & spring

Head (PP/PVC)

Pipe (Discharge/ suction)

FRP Tank 100 Ltr

Supply and fixing well cap upto 250 mm bore pipe consisting of two parts complete with welding and machinery work having provision of cut out for passing of column pipe and fabricated out of mild steel sheet 3.15 mm thick including excavation upto 0.5 mtr depth,cutting out rusted casing pipe and replacing the same with new casing pipe with jointing/welding complete all as specified and as directed .

S&F in repair of Sign Board of size 5100mmx1200mm made out of 2 mm thick Stainless Steel and including marking of outer border in numerical and figure height 100 mm upto 20 Nos as per approved pattern including 02 nos of 50mm SS pipe stand complete all as specified and as directed.

S&F in repair of Sign Board of size 1200mmx900 mm made out of 2 mm thick Stainless Steel and including marking of outer border in numerical and figure height 100 mm upto 20 Nos as per approved pattern including 02 nos of 50mm SS pipe stand complete all as specified and as directed.

M&L for construction of valve pit in repairs of size 150 cm x 150 cm x 150 cm (internal dimensiions), stone/ brick construction, including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to distance not exceeding 50 m and depositing where directed, PCC in foundation of the mix (1:2:4) type D-2, brick masonary in cement mortor (1:4) rendering 12 mm duck in cement mortar (1:4) internally, finished even and smooth and pointing flush externally as the work proceeds in the same mortor. Mild steel angle iron 40 x 40 x 6mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint of the that as approved by the GE over a cost of red oxide primer and painting all the MS embedded in PCC with two coats of black bitumenous paint and complete all as specified and as directed.

Notes :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

verma enterprises (BID ID -3232865)