Upgradation and Strengthening of Psychiatric Hospital Resham Ghar Colony Jammu.

Supplying/Providing/Fixing of (ISI Certified brand) Standard size 19mm thick water proof ply of superior quality incl. cost of material, labour,carriage etc complete.Green/Century or equlivent complete job (for constructing study table)

Supplying/Providing/Fixing (ISI Certified brand) Standard size of 19mm thick water proof ply of superior quality incl. cost of material, labour,carriage etc complete.Green/Century or equlivent complete job (for modular Almirah and Kitchen)

Supplying/Providing/Fixing of 1mm thick mica of superior quality incl. cost of material, labour,carriage etc complete.The colour of mica shall be approved from competent authority of Hospital.

Supplying / Providing/ fixing of slider for cupboard of standard size including necessary fixutres etc complete.

Supplying/ providing/fixing of modular handle of superior quality including all necessary fixtures required at site complete job.

Renewing glass panes, with wooden fillets wherever necessary : 14.7.2 Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 9.10.3 Second class deodar wood

Supplying/Providing/ Fixing of P.V.C. fluted panels of superior quality including cost of material, labour ,wastage etc All complete. Note. The sample of p.v.c fluted panel shall be approved from the competent authority of the hospital.

Supplying/Providing/ Fixing of P.V.C. louvers panels of superior quality including cost of material i.e. pvc louvers , adhesive, chinese nails, L and U bends, labour ,wastage etc All complete. Note. The sample of p.v.c louvers panel shall be approved from the competent authority of the hospital.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete . Size of tile 600x600 mm

Suppling/providing/fixing of Polyester vertical blinds/ curtains of superior quality including cost of material , labour , carriage etc complete job. Note:- The sample of Vertical blind shall be approved from the competent authority of the hospital before execution of work.

Supplying/ Providing/ fixing of modular hinges for kitchen cabnits including cost of material , labour, carriage etc complete.

Supplying/ Providing/ fixing of modular handles for kitchen cabnits including cost of material , labour, carriage etc complete.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 8.2.2 Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as peI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.11.1 Kitchen sink with drain board 18.11.1.1 510x1040mm bowl depth 250mm

Grinding of existing marble stone by way of cleaning, polishing including cost of material,labour,etc complete job.

Supplying/ providing/ fixing of chairs for lecture hall & library of superior quality including cost of material, labour, carriage complete job. ( Godrej only )

Removing Dry / Oil bound Distemper / water proofing cement paint and like by scrapping , sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.

Providing & applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth. 1 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.91.2 Two coats

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever required :18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete , Semi rigid pipe 32 mm

Providing and fixing 100 mm sand cast iron grating for gully trap.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.

15 mm dia. nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

19.36.1 15 mm nominal bore

19.36.2 20 mm nominal bore

19.36.3 25 mm nominal bore

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore

Supplying/Providing/fixing of PVC bend 100mm dia of superior quality including cost of material, labour etc complete.

Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete: White solid plastic seat with lid.

Providing and fixing un plasticized P.V.C. connection pipe with PTMTnuts, collars and bush of approved quality and colour19.65.2 15 mm nominal bore with 45 cm length.

Cutting holes up to 30x30 cm in walls including making good the same:19.67.1 With common burnt clay (non modular) bricks

Supplying/Providing/Fixing of P.V.C Pipe of superior quality including cost material,labour etc complete.

75mm diameter

100mm 6Kg pressure

Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)of approved make and quality as per direction of Engineer-incharge

Providing and fixing on wall face un-plasticized - PVC mouldedfittings/accessories for un plasticized Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ringconforming to IS : 5382 leaving 10 mm gap for thermal exp Single tee with door 110x110x110 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 liter white P.V.C automatic flushing Flush

Engaging plumber for repairing of sanitary fixtures at different locations of hospital etc complete.

Suppling/Providing/Fixing of steel Sinages at different locations of Directorate.

Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade, one or more coats on old work.

Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as requiredand also including applying a coat of red oxide zinc chromate primer overthe M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thicknessnot less than 10 mm

Supplying/providing/fixing of 595*595mm*8mm thick calcium silicate board on existing grid of superior quality including cost of material, labour, carriage etc. complete job.

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : 15.14.1 Of sectional area 40 sqcm. and above.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below

Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand)Extra for half Brick masonry in superstructure above plinth level upto floor V level. Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry

15mm Cement plaster on the rough side of single or half brick wall of mix:

12mm Cement plaster of mix:13.1.1 1 : 4 ( 1 cement : 4 fine sand)

Engaging carpenter for easing of door and windows

Engaging Labour for cleaning of site

Polishing on wood work with readymade wax polish of approved brand and manufacture on old work.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)

22.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) 22.1.2.2 Powder coated aluminum (minimum thickness of powder coated 50 microns)

22.1.1 For fixed portion 22.1.1.2 Powder coated aluminum (minimum thickness of powder coated 50 microns)

Supplying/ Providing/ Fixing of Stainless Steel Legs / Support including cost of material , labour, carriage etc. complete Job.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Supplying/ Providing/ Fixing of oval type washbasin of superior quality including cost of material , labour, carriage etc. complete Job.( Note diameter of basin not less than 45cm )

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge.22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) 22.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Engaging electrician

Engaging welder

Labour engaged for shifting of ply boards from ground floor to 2nd floor

Please Enable Macros to View BoQ information