Annual Civil Repair and Maintenance for Rajiv Gandhi Handicrafts Bhawan, Connaught Place, New Delhi

Bill of Quantity ( BOQ )

S.NO. DSR-2023 Description Unit Qty. Rate Amount (Rs.)

PAINT WORK - INTERIOR - Note: The work shall be carried out

twice in a year at an interval of six months.

Removing dry or oil bound distemper, water proofing cement

paint and the like by scrapping, sand papering and preparing the

surface smooth including necessary repairs to scratches etc.

Providing and applying plaster of paris putty of 2 mm thickness

2 13.26 over plastered surface to prepare the surface even and smooth

Distempering with 1st quality acrylic distemper (ready mixed)

having VOC content less than 50 gram/litre, of approved

manufacturer and of required shade and colour all complete to

achieve even shade and colour :

New work (two or more coats) over and including water

5 13.41.1 thinnable priming coat with cement primer having VOC content SQM 1450 185.65 269192.50

less than 50 gram/litre

Finishing walls with water proofing cement paint of required

7 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) SQM 1050 116.90 122745.00

PAINT WORK - EXTERIOR - Note: The work shall be carried out

twice in a year at an interval of six months.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over

9 13.45.1 and including priming coat of exterior primer applied @ SQM 750 223.60 167700.00

Finishing walls with Acrylic Smooth exterior paint of required

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

11 13.46.1 including priming coat of exterior primer applied @ 0.90 litre/10 SQM 1833 160.60 294379.80

Finishing walls with Premium Acrylic Smooth exterior paint with

Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over

13 13.47.1 and including priming coat of exterior primer applied @ 0.90 SQM 1350 171.10 230985.00

SANITARY & PLUMBING WORK

Dismantling C.I. or asbestos rain water pipe with fittings and

clamps including stacking the material within 50 metres lead :

16 17.35 Providing and fixing soil, waste and vent pipes :

18 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 MTR 100 1151.90 115190.00

Providing and fixing M.S. holder-bat clamps of approved design

to Sand Cast iron/cast iron (spun) pipe embedded in and

including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), including cost of cutting holes and making good

the walls etc. :

Digitally signed by AMIT

S.NO. DSR-2023 Description Unit Qty. Rate Amount (Rs.)

Providing and fixing bend of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

24 17.38.1.1 Sand cast iron S&S as per IS - 1729 EACH 5 598.90 2994.50

25 17.39 Providing and fixing plain bend of required degree.

27 17.39.1.1 Sand cast iron S&S as per IS - 1729 EACH 10 470.45 4704.50

28 17.40 Providing and fixing heel rest sanitary bend

30 17.40.1.1 Sand cast iron S&S as per IS - 1729 EACH 20 584.25 11685.00

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste

vent pipes and fittings with two coats of synthetic enamel paint

of any colour such as chocolate grey, or buff etc. over a coat of

primer (of approved quality) for new work :

Providing and fixing PTMT Waste Coupling for wash basin and

sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62mm breadth

weighing not less than 45 gms

Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS:8931

Providing and fixing C.P. Brass extension nipple (size

37 18.53A 15mmx50mm) of approved make and quality as per direction of EACH 27 74.80 2019.60

Engineer-in-charge.

Providing and fixing PTMT pillar cock of approved quality and

15 mm nominal bore, 107 mm long, weighing not less than 110

Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting and

making good the walls and floors wherever required

41 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 5 6515.55 32577.75

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

42 17.16A upto 1 metre long with S.S. triangular plate to Eureopean type EACH 5 349.15 1745.75

W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with

43 17.18 manually controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete.

44 17.18.1 10 litre capacity - White EACH 8 1190.65 9525.20

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

46 17.28.1 Semi rigid pipe

49 17.28.2 Flexible pipe

Sub Total 1742346.00

Digitally signed by AMIT