REAPIR /MAINT OF JOINERY, SANITARY FITTINGS AND ROOF TREATMENT, ROOF SHEETS AND PERIODICAL SERVICES OF CERTAIN BLDGS IN DOMESTIC AREA AND TECHNICAL AREA AT AFS BARNALA UNDER GE (AF) STN HALWARA

Amount

M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and filling holes, cracks with wall care putty and applying two coats of distemper oil emulsion paint over a coat of primer above 1 to 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scraping down smoke root mould moss and efflorescent salts trading oil and greasy spots filling holes cracks with wall care putty all and applying one coat of white wash, complete all as specified and directed.

All as per item No 2 above but on ceiling.

All as per item No 2 above but one coat of distemper oil emulsion on wall.

M&L for prepraration of old painted wood or wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel and iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots and filling holes, cracks with wall care putty and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scraping down smoke root mould moss and efflorescent salts trading oil and greasy spots filling holes cracks with wall care putty all and applying one coat of cement base paint, complete all as specified and directed.

S&F in repair soap dish any type fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for 12 mm thick plaster in cement mortar 1:6, on brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces using WPC even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured & paid separately under respective items.

M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 and surfaces finished even and smooth without using extra cement, complete all as specified and directed

M&L prepration of new plastered surfaces and applying three coat of white wash on ceiling, complete all as specified and directed.

M&L prepration of new plastered surfaces of and applying three coat of white wash on wall, complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer above 2mm thick wall care putty on new surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of primer, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick works with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick works with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 21 but area exc 1.5 Sqm but not exc 4 Sqm each.

Taking down shutter from the frame area exceeding 1 sqm not exceeding 2 sqm each, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.and including treated with tar or coal tar black with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 , complete all as specified and directed.

S&F in repair rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepred for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running, also fasting and fixing complete. Fe 290 (Gde E-165), complete all as specified and directed.

S&F in repair 0.80mm thick mild steel, plain, black sheet in hearths, covering to door shutter, covering to door chowkats ( frames), chullah hoods, water tanks,water trough, ducy, urinaltroughs and funnels etc. cut to size edges beded if directed holes punched including round headed screwes clout nails or rivets and fixed to wood or steel members, etc with plain 40mm lap joint or welded/ riveted seams including bending turning up mitred angle stopped ends outlet etc as required. continuous (piano) hinges mild steel bright finished or electroglvanised width of flaps (when open) in 30mm, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of 12 mm dia square guard bars in 150mm spacing c/c including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Glazing & Wire cloth shall be measured and paid separately. (ii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

S & F in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws to timber frame work, complete all as specified and directed.

M & L in repair external teak wood lipping 6mm thick and 18/19mm wide for block boards fixed with nails, complete as specified and directed.

S&F in repair continuous (Piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open, complete all as specified and directed.

S&F in repair 100 mm, 4 levers, aluminium mortice lock vertical type, complete all as specified and directed.

S&F in repair hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws size 100mm, complete all as specified and directed.

S& F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F 35 mm thick factory made IInd class hard wood plain framed panelled shutters (any number of panels), with panels of 9mm thick verneered particle board medium density, wood particle board with commercial face verneers: suppled and fitted to chowkats, complete all as specified and directed.

S&F 35 mm thick factory made IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member of shutter all as per clause 8.24 (a) of SSR part-I, complete all as specified and directed. Note :- Glazing and wire cloth shall be measured and paid separately.

S&F factory made solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail & bottom rail on plain side & as gap insert for top and bottom rail. Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed.

S&F 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long, complete all as specified and directed.

S&F 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed.

S&F aluminium handles cast type anodised 150mm long, complete all as specified and directed.

S&F aluminium handles cast type anodised 100mm long, complete all as specified and directed.

S&F mild steel 300mm helical door spring, ordinary rat tail rod door spring , patteren including roller and roller plate, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with stainless steel staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples in any type of door/window/ventilators including fixing of new beading if old damaged, complete all as specified and directed.

Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqmm each pane, complete all as specified and directed.

S&F small fitting of 1st class hard wood any shape of size not exceeding 200 cucm as for door stopper, cleat etc, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of girth exceeding 10 cm, complete all as specified and directed.

All as per item No 52 but except red oxide primer.

M&L for prepraration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer of girth exceeding 10 cm, complete all as specified and directed.

Demolition for cement concrete exc 15cm thickness above ground floor as sunken floor, complete all as specified and directed.

M&L for 75 mm thick in cement concrete (1:3:6) type C-2 using 40mm graded stone gregete as in plinth protection / path including necessary form work, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid jointless cerermic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed.

M&L for glazed ceramic coloured tiles (Ist quality) 300 x 450mm x 6-7mm / 300 x 200mm x 7mm thick on vertical surfaces as in skirting / dado, set and jointed with neat cement slurry and pointed in white /coloured cement to match the shades of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for Vitrified ceramic tiles (Ist Quality) light shade 10 mm thick (Square / Rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including Screed bed or bedding layer of mortar 15mm thick for laying floor finished in cement mortar 1:6, complete all as specified and directed.

M&L for Vitrified ceramic tiles (Ist Quality) light shade 10 mm thick (Square / Rectangular) polished, area of each tiles n. exc 0.36 Sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over 10mm thick rendering in Cement mortar 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor apron etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site, complete all as specified and directed.

M&L granite slab (of any type) 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including making holes in RCC shelves suitable for gas pipe with round edge where required, complete all as specified and directed.

M&L for providing edge mounting to 18-20 mm thick stone of counters vanities etc including machine polishing to edge to give high gloss finish etc, complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 15 mm bore medium grade galvanised with all fitting and fixed to wall and ceiling, complete all as specified and directed.

S&F 20 mm bore medium grade galvanised with all fitting and fixed to wall and ceiling, complete all as specified and directed.

M&L in repair of welding of hinges for fixing door and window as per site requirement, finishing the surface to match with existing finishes and similar works, complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in cills, steps and other similar bands, plinth courses, parpets, filling of mass concrete for staging of water tanks, copping, bed block of hold fast / bed plates etc, complete all as specified and directed.

S&F in repar 20mm size Ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S & F in replacement of water tank cover of any capacity , complete all as specified and directed.

S&F in repair 15mm bore fancy type bib tap cast copper alloy chromium plated, screwd down, high pressure with crutch or butter fly handle, for iron pipe or for brass ferrule and fixing, complete all as specified and directed.

S&F in repairs fancy type stop valve/ angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15 mm bore, complete all as specified and directed.

All as per item No 74 above but for 20mm.

S&F in repair 15 mm bore Pillar taps fancy type, cast copper alloy with capstan head chromium plated, screwed down high pressure, with or without letter 'Hot' or 'Cold' with long screwed shanks and fly nut screwed for iron pipe, complete all as specified amnd directed.

S&F in repair 32 mm waste coupling of PTMT (half or full threaded), complete all as specified amnd directed.

S&F in repair Waste coupling of PTMT suitable for urinal (weight 32mm-45gms), complete all as specified amnd directed.

S&F in repair grating doom of 100mm dia of PTMT (minimum weight 25gms), complete all as specified amnd directed.

S&F in repair grating doom of 125 mm dia with waste hole of PTMT (minimum weight 40gms), complete all as specified amnd directed.

S&F in repair PVC connection pipe 15 mm dia with PTMT nut for length 450 mm, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with swivel joint fixed to 15 mm bore pipe, complete all as specified and directed.

S&F in repair towel rail 20mm dia(D) type 60cm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 190 gms), complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern including 'P' or 'S' trap connecting to trap and to flushing pipe anti syphonage pipe etc complete with foot rest of size 580x440mm (Jointed with epoxy resin to glazed trap) including provision of lime concrete bedding, complete all as specified and directed.

S&F in repair vitreous chinaware wash basin, white flat back size 550x400mm including CI / MS brackets cutting for and pinning in ends of barckets or erecting stand, PVC waste coupling and waste pipe, complete all as specified and directed.

S&F in repair china ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, bend including chromium plated brass jet faucet suitable for EWC with PVC chord and brass nozzle and fixed to pipe, complete all as specified and directed

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipes with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed

S&F in reapirs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate), complete all as specified and directed.

S&F in reapirs cast iron floor trap of 100 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate), complete all as specified and directed.

S&F in repair 750 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum three layered hoisted and fixed in position including 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball (Minimum weight 210 Gms), complete all as specified and as directed.

S&F in repair 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), minimum three layered hoisted and fixed in position including 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball (Minimum weight 210 Gms), complete all as specified and as directed.

S&F in repair PVC valve less syphonic action type, flushing cistern 10 ltr capacity, low level white with inlet, ball valve, float and handle including brackets, 32mm flush pipe etc, complete all as specified and directed.

S&F in repair PVC syphon kit with handle for PVC low level flushing cistern capacity 10 ltrs, complete all as specified and directed.

Disconnecting existing tank exc. 250 Litres but not not exc. 500 Litres capacity, setting aside (or lowering if required), cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in same position including writing date of cleaning in ---DD/MM/YYYY-- etc with synthtic enamel paint of size not less than 100mm height, complete all as specified and directed.

Demolition/breaking up or down PVC drain pipe any size fixed in any position, complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) as in rain water pipe etc, complete all as specified and directed. Note :- Clamps and bends shall be measured and paid separately under respective items.

S&F 110 mm dia PVC (SWR) bends, complete all as specified and directed.

S&F in repair 25 mm dia Harison rails, mild steel, chromium plated with fixing fancy type brass CP brackets and side knobs, stops, rollers etc as in curtain rod and fixed to wall, complete all as specified and directed.

S&F in repairs 32/40mm dia waste pipe for sink/wash basin, flexible and expandable length upto 900mm, complete all as specified and directed.

Supply and fixing in repair stack clamps made out of 50mm X 5mm flat iron and 16 mm round iron stay including bolts and nuts and securing ends stays to wall or roof for rain water pipe or CI pipe 100mm bore at any height, complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roof, complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specficially provided for, complete all as specified and directed.

Removing demolised material exc 250m but n. exc 500m above the starting point and depositing where directed, complete all as specified and directed.

Roughening surfaces of old/concrete floor by backing, sweeping, clean with iron brush and washing down with water etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof kerbs, mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for PCC padding average 50mm thick to be provided in slope PCC 1:2:4 type B-1 using 20mm graded aggregate, complete all as specified and directed.

M& L for wire brushing neat cement slurry with 3 kg of cement per sqm at top and bottom of base coat and cleaning top surfces, complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions, complete all as specified and directed. Note :- Water proofing compound will be measured and paid seperately.

Supply only Integral waterproofing compound, complete all as specified and directed.

M&L for preparation of roof top surfaces providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106 on top of concrete roof surfaces, all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75Kg/Sqm and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart bcare damp proof ultra @ total consumption 2Kg/sqm in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350% The material shall be applied with brush or rooller ,complete in all respect as per manufacturer instructions, complete all as specified and directed. Note : 6 hrs interval between two coat will be maintain. All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . i)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.

Demolition of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M& L for reinforced cement concrete type B-1, 1:2:4 (20mm graded stone aggregates) as in precast cement concrete cover slab for tank satging, manhole cover and similar articles with plain face set in cement mortar 1:4, complete all as specified and directed.

S&F MS TMT bar 10mm dia and over cut to length bent to shapes requried including cranking bending spirally for hooping for columns ,hooking ends and bindings with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M & L for formwork to chulla hoods, chajjas troughs and similar items including edges, complete all as specified and directed.

M & L for form work to edges of concrete flats treads, break in floors window cills concrete railings, openings in concrete walls floor and roof not ecxeeding 20cm wide and sides of RCC/PCC bands in walls horizantal or slopping and similar work exc 10cm but not exceeding 20cm wide, rough finished surfces of concrete flat etc, complete all as specified and directed.

Disconnecting existing tanks capacity 500 ltr to 1000ltr, setting a side (or lowering if required) for repairs and hoisting if required reconnecting and re-fixing in same position, complete all as specified and directed.

Dismantling of GI sheet (corrugated or semi corrugated etc) sheets in roof coverings, complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F in repair aluminium anodised powder coated frame, grills of any design for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F in repair anodised aluminium powder coated (minium 50 micron thick) door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, ruber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc, complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be measured and paid separately.

S&F in repair Powder coating aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm, complete all as specified and directed.

S&F in repair door closer cast iron body hydrualically regulated, designatioin 03 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

All as per item No 125 above but exc. 0.5 sqm.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 4 Sqm but not exceeding 8.0 Sqm each (Disturbed surfaces of wall shall be make good by the contractor), complete all as specified and directed.

S&F 1.25mm thickness of lath Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple rod, and one shop coat of primer and erected in position as indicated, push pull or manual type, complete all as specified and directed.

S&F in repair PVC Bath cabinet with mirror 40cmx50cm, complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S K BANSAL AND CO. (BID ID -3499647)

VISHAV CONSTRUCTIONS (BID ID -3499689)

SANGAM ENGINEERS (BID ID -3499182)

m/s k.k. construction co. (BID ID -3493710)

M/s Vandana Builders (BID ID -3505937)