ANNUAL REPAIR/REGULAR MAINTENANCE OF DETACHMENT AERONAUTICAL QUALITY ASSURANCE WING (ARMT) AT ORDINANCE FACTORY MURADNAGAR UNDER GE(S) MEERUT

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof padding finished even and fair complete all as specified and directed.

Material and labour for 10mm thick rendering in CM 1:4 on roof surfaces finished even and smooth without using extra cement using WPC @3% by weigh of cement complete all as specified and directed. (WPC will be measured and paid separately)

Supply only Integral waterproofing compound using complete all as specified and directed.

Material and labour for Applying evenly a priming coat with Paving bituminous primer @ 0.3 kg/Sqm complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including leaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application method with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction complete all as specified and directed.

Material and labour for cutting grooves in V-section in existing roof or terracing, cleaning out and grouting with cement & sand mortar 1:3, cutting depth not exc 10cm girth complete all as specified and directed.

Material and labour for one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.

Material and labour for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

Material and labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour for Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement including necessary form work complete all as specified and directed.

Material and labour PCC 1:3:6 type C1, (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc complete all as specified and directed.

Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

Material and labour for 10mm thick rendering in CM 1:4 finish even and fair for laying wall tiles complete all as specified and directed.

Material and labour for 300 x 200 x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

Demolition floor, hearth or tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing rough to receive floor tiles complete all as specfied and directed

Material and labour for 15 mm thick screed bed in CM 1:4 for laying floor tiles etc complete all as specified and directed.

Material and labour for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed.

Taking down chowkhats with shutters of any description exc1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down chowkhats with shutters of any description n exc1.5 sqm each complete all as specified and directed.

Material and labour for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat & brick work whereever required for fixing etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specified and directed.

Supply and fix Aluminium anodized Deco grill 7.50 mm of Design No DG 104 with suitable size F & H section as required to Aluminium/Wooden windows complete all as specified and directed Make : M/s DECOGRILL

Supply and fix 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination complete all as specified and directed.

Supply and fix 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix Aluminium (extruded section) body for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixe complete all as specified and directed.

Taking down cement or cement lime plaster, any description including raking out joints, hacking for key, scrubbing down with water etc all inclusive of labour,scaffolding, T&P and sundries etc. complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of concrete /brick surface finished even and fair complete all as specified and directed.

Material and labour for preparation of newly plastered cement surfaces and applying three coat of white wash on wall complete all as specified and directed. by Engr-in-Charge

Material and labour for applying two coat of white wash on ceilings surface complete all as specified and directed.

Material and labour for preparation of old plastered cement surfaces and applying two coat of white wash on wall all as specified and directed.

Material and labour for washing rubbing down and stopping of distemperd and painted surface for Applying two coats of Distemper oil emulsion, white or tinted over a coat of chalk whitening on new wall surface including preparation of surface complete all as specified and directed.

Material and labour for applying two coats of cement base paint, white or tinted on old wall surface including preparation of old surface surface complete all as specified and directed.

Material and labour chequered cement concrete tiles 200 x 200 x 25 mm thick, set, jointed and pointed in neat cement slurry in floor/ footpath complete all as specified and directed.

Supply and fix in repair 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.

Supply and fix in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.

Supply and fix in repair 15mm fancy type, chromium plated stop valves, screwed down, high pressure, screwed both ends for iron pipe or for unionSupply and fixixed complete all as specified and directed.

Dismantling of brocken/old corrugated Asbestos cement (corrugated, semicorrugated, etc.) sheeting, including nainital or similar pattern roof coverings any thickness complete all as specified and directed.

Supply and fix for 6mm thick fiber cement, corrugated or semi-corrugated sheets in roofs, walls etc sheeting with two orrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 120 gsm complete all as specified and directed.

Material and labour for factory made precast machine pressed kerb stones of PCC grade M-15 (design mix) and of shape and size as directed, set jointed and pointed cement and sand mortar (1:4) fixed in repairs with and including necessary excavation and earth work and making good the disturb surfaces to match with the exixting surfaces including removal and disposal of rubbish complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces complete all as specified and directed.

Material and labour for reinforced cement concrete 1;2;4 type B1 (using 20 mm graded stone aggregate) for slabs supported on walls , landings, in shelves ,chhajja's and the like complete with all necessary formwork etc complete all as specified and directed.

Dismantaling of damaged portion of Brick wall built in cement mortar/cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces or other than fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Material and labour for 1.6 mm thick Mild steel, plain, black sheet welded in Framed work as in doors or gates of angle or other section complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including fabrication complete all as specified and directed.

Material and labour for Framed work of Fe-410-W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Material and labour for prepration & applying one coat of red oxide and after that apply one coat of synthetic enamel paint to previously untreated surface of iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old steel surfaces complete all as specified and directed.

Material and labour for hand rail or other steel section, baluster steel post for prepairing fabricate office name board including writing of office name in hindi and english. Note - height of board 1.5 mtr above GL and width of board 1.2 mtr complete all as specified and directed.

Supply and fix for 32 mm low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Dismanteling wall and ceiling boards(fibre, pulp, insulation boards /slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix of anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed.

Material and labour hangers 6 mm dia G.I. (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and as directed

Material and labour for non asbestos fibre in 8 mm thick cement building board fixed or laid/inserted to aluminium frame work with screws complete all as specified and directed.

Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.