General fund Vanji Nagar

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levveling, sectioning breaking clods etc., in all incidental charges etc., complete as per standard specification .

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, levveling, sectioning breaking clods etc., in all incidental charges etc., complete as per standard specification .

Plain Cement Concrete 1:4:8 mix (One part of Cement, Four part of Fine Aggregate and Eight part Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNDSS No.28).

Providing formwork for all Rcc works of sides and soffits for plain surfaces of slabs, beams and columns with support and strutting up to 3.60m hight with all cross bracings using mild steel sheetof 90cm*60cm and stiffened with welded mild steel angle of size 25*25*3mm for boarding laid over silver oak joists of size 10cm to 6.50cmspaced at 90cm c\c and supported by casurina props of 10cm to 13cm dia spaced at 75cm c/c complying with standards specification. for Drain

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supply and fabrication of Steel including cost and conveyance and all labour charges including all charges etc., completed.

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Plain Cement Concrete 1:1.5:3 (one cement, One and Half crushed stone sand and Three hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means (S.No:135-SD Book Vol-I )

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 100mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying interlock paver of approved make as per at land surface using M40 grade concrete blocks its minimum thickness of 83 mm and providing minimum 100 mm thick stone Dust cushion below the pavers as sub base stone Dust filling between the Pavers and compaction by hydrualic compresive machine same as for Powers and capacity the same as directed by the departmental officers etc,complete as per standard specifications

Please Enable Macros to View BoQ information