Interior fitout work in the office space of Oil India Limited at 6th floor of NBCC Square, Rajarhat, New Town, Kolkata

ABSTRACT OF COST

PROPOSED REFURBISHMENT OF THE NEW OFFICE SPACE AT NBCC SQUARE, RAJARHAT, KOLKATA.

Sub Head No. Description DSR NDSR/MR Total

SH.2 Modular Furniture & Chair Work ₹ 21,164,609.00 ₹ 21,164,609.00

Total of Schedule Items (CI applicable) (A) : ₹ 27,512,054.22

Total of NDSR Items (CI not applicable) (B) : ₹ 84,290,442.37

Add EPF @ 3.125% (EPF @12.5 % of Labour Component)on (C) : ₹ 3,493,828.02

Add ESI @ 0.8125% (ESI @3.25 % of Labour Component) on (C) : ₹ 908,395.28

Grand Total : ₹ 116,204,720.00

Grand Total : ₹ 116,204,720.00

Digitally signed by AMIT

1. CIVIL & INTERIOR WORKS

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

I Dismantling/ Demolishing

Rates considered are from CPWD-DSR-2023

Dismantling / Demolishing and removing the following in locations

as earmarked to accommodate the proposed layout. Disposal of

dismantled material to a place permitted by the Local Municipal

Authorities, including making good any damages done to the

structure during dismantling complete in all respects . No

1 dismantled material will be allowed to be accumulated at site (

6th or 7th floors ). All dismantling to be carried out under strict

supervison including putting scaffolding props ( steel plates etc. )

where ever required ( for all items of demolition / dismantling ) to

accomodate proposed layout. All complete as per specifications,

drawings, design intent and as directed by Consultant / OIL.

Demolishing cement concrete manually/ by mechanical means

DSR Item no. including disposal of material within 50 metres lead. All complete

15.2.1 as per specifications, drawings, design intent and as directed by

Consultant / OIL.

Demolishing R.C.C. work manually/ by mechanical means

DSR Item no. including stacking of steel bars and disposal of unserviceable

15.3 material within 50 metres lead. All complete as per specifications,

drawings, design intent and as directed by Consultant / OIL.

Demolishing brick work manually/ by mechanical means including

DSR Item no. stacking of serviceable material and disposal of unserviceable

15.7.4 material within 50 metres lead. All complete as per specifications,

drawings, design intent and as directed by Consultant / OIL.

Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete

1.4 and stacking within 50 metres lead : EACH 16.00 ₹ 367.20 ₹ 5,875.20

Of area 3 sq. metres and below. All complete as per specifications,

drawings, design intent and as directed by Consultant / OIL.

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material initally to Ground floor in the area

DSR Item no. SQUARE

1.5 earmarked by EIC and susequently to the location approved by 137.00 ₹ 73.40 ₹ 10,055.80

Municipal Authorities. All complete as per approval and directions

of Consultant / OIL. For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring including cement mortar including

stacking of serviceable material and disposal of unserviceable

DSR Item no. material initally to Ground floor in the area earmarked by EIC and SQUARE

15.25 susequently to the location approved by Municipal Authorities. All METER

complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

Dismantling old plaster / skirting / Dado raking out joints and

cleaning the surface for plaster including disposal initally to Ground

DSR Item no. floor in the area earmarked by EIC and susequently to the location SQUARE

15.56 approved by Municipal Authorities. All complete as per METER

specifications, drawings, design intent and as directed by

Consultant / OIL.

Dismantling of old S.W. pipes including breaking of joints and bed

concrete stacking of useful materials initally to Ground floor in the

1.8 area earmarked by EIC and susequently to the location approved

by Municipal Authorities. All complete as per specifications,

drawings, design intent and as directed by Consultant / OIL.

Individual rates are adopted from average budgetary quotations (

copies enclosed) Rates are exclusive of GST

Dismantling W.C. Pan of all sizes including disposal of dismantled

DSR Item no. materials i/c malba.

14.82 All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

including stacking of useful materials near the site and disposal of

1.11 unserviceable materials within 50 metres lead. EACH 5.00 ₹ 112.05 ₹ 560.25

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

Disposal of building rubbish / malba / similar unserviceable,

dismantled or waste materials by mechanical means, including

1.12 loading, transporting, unloading to approved municipal dumping CUBIC METER 150.00 ₹ 263.95 ₹ 39,592.50

ground. All complete as per specifications, drawings, design intent

and as directed by Consultant / OIL.

Structural steel work in single section fixed with or without

connecting plate including cutting, hoisting, fixing in position and

2.1 applying a primer coat of approved steel primer all complete. KILOGRAM 450.00 ₹ 117.35 ₹ 52,807.50

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

B MASONRY WORK

Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure on 6th floor level.

DSR Item no. SQUARE

3.1 Cement mortar 1:3 (1 cement :3 coarse sand). 335.00 ₹ 1,165.50 ₹ 390,442.50

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

Extra for providing and placing in position 2 nos 6mm dia MS bars

DSR Item no. at every third course in half brick / AAC blocks masonry work. SQUARE

6.15 All complete as per specifications, drawings, design intent and as METER

directed by Consultant / OIL.

C WALL FINISHING

Providing and applying cement plaster. 12mm cement plaster of

DSR 2023 Item mix 1 : 6 (1 cement : 6 coarse sand). SQUARE

No 13.1.2 All complete as per specifications, drawings, design intent and as METER

directed by Consultant / OIL.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5

sq. meters and under including cutting the patch in proper shape,

raking out joints and preparing and plastering the surface of the

DSR 2023 Item SQUARE

4.2 walls complete including disposal of rubbish : 30.00 ₹ 547.40 ₹ 16,422.00

No 14.1.1 METER

With cement mortar 1:4 (1cement: 4 fine sand).All complete as per

specifications, drawings, design intent and as directed by

Consultant / OIL.

VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS: 15622, of approved make, in all colours

4.4 11.41 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching

pigments etc., complete.

4.5 EPOXY GROUTING

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

11.48 (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of Engineer-in-

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

DSR 2023 Item green, black of any size as approved by Engineer-in-Charge, in SQUARE

No. 8.31 skirting, risers of steps and dados, over 12 mm thick bed of cement METER

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed

with pigment of matching shade complete.

Providing & Applying Plaster of Paris putty over plastered surface,

DSR 2023 Item leveling and smooth finishing the surface including sand papering SQUARE

No 13.26 the old surface etc. All complete as per specifications, drawings, METER

design intent and as directed by Consultant / OIL.

Providing and applying 12 mm thick (average) premixed

formulated one coat gypsum lightweight plaster having additives

and light weight aggregates as vermiculite/ per liter respectively

DSR 2023 Item SQUARE

4.14 conforming to IS: 2547 (Part- 1 & II) 1976, applied on hacked / 176.00 ₹ 468.90 ₹ 82,526.40

No 13.78 METER

uneven background such as bare brick/block/ RCC work on walls

& ceiling at all floors and locations, finished in smooth line and

level etc. complete.

Providing and applying two or more coats of plastic emulsion paint

(roller finish) of approved make and shade as per the

DSR 2023 Item SQUARE

4.15 manufacturer’s specifications to give a smooth surface on new 2906.00 ₹ 137.85 ₹ 400,592.10

No 13.60.1 METER

surface. All complete as per specifications, drawings, design intent

and as directed by Consultant / OIL.

Spirit Polishing the grooves in dark / charcoal colour. Groove size

DSR 2023 Item may vary between 6mmx6mm and 12mm x 12mm. SQUARE

No 13.68.1 All complete as per specifications, drawings, design intent and as METER

directed by Consultant / OIL.

Providing and laying Autoclaved Aerated Concrete (AAC) blocks

masonry 100mm/125mm thick with Grade-1 AAC blocks of density

551 to 650 kg/cum conforming to IS:2815 (Part3)in super structure

5.1 above plinth level up to floor V level in cement mortar 1:4 (1 CUBIC METER 15.00 ₹ 10,195.00 ₹ 152,925.00

cement : 4 coarse sand). the rate includes providing and placing in

position 2 nos. 6 mm dia. M.S. bars at every third course of masonry

Providing and laying between 25 to 50mm thick (av. 40mm ) PCC

of ratio 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20mm

DSR Item no. nominal thickness) over slab / Foam concrete to make a uniform

4.1.3 base for laying marble / granite / Tile flooring. All complete as per

specifications, drawings, design intent and as directed by

Consultant / OIL.

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

Providing and fixing removable raised/false access flooring with

system and its components of approved make for different plenum

height with possible height adjustment upto 50 mm, comprising of

5.6 Dsr item 11.54 modular load bearing floor panels supported on G.I. rectangular

stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-

charge consisting of:

(a) Providing at required spacing to form modular framework,

pedestals made out of GI tube of thickness minimum 2 mm and 25

mm outer diameter, fully welded on to the G.I. Base plate of size

100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mmx75mmx3.5 mm welded with GI fully

threaded stud 16mm outer diameter with two GI Check nuts

screwed on the stud for level adjustment upto 50mm, locking and

stabilizing the pedestal head in position at the required level. The

pedestals shall be fixed to the subfloor (base) through base plate

using epoxy based adhesive of approved make or the machine

screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized

of rectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully

threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive

the floor panel, this system shall provide adequate solid, rigid

support for access floor panel, the system shall provide a minimum

clear uninterrupted clearance between the bottom of the floor for

electrical conduits and wiring etc. all complete as per the

architectural drawings, as specified and as directed by the

Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm

medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded

construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded

together (minimum 64 welds in each dome and 20 welds along

The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled

with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be

factory finished with Anti-static High Pressure laminate with Non

Warp technology upto 1mm thickness for superior adhesion and

Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm

without collapse in the centre of the panel which is placed on four

steel blocks. The panel will withstand and Uniformly Distributed

Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all

complete as per the approved manufacturers specification and as

per the direction of Engineer-in-charge. All specification must be

printed on the side of the panel to ensure the quality of the product.

a) 11.54.2 450 mmFinsihed floor height Sqm 150.00 ₹ 5,977.35 896,602.50

Providing and fixing removable raised/false access flooring with

system and its components of approved make for different plenum

height with possible height adjustment upto 50 mm, comprising of

5.12 modular load bearing floor panels supported on G.I. rectangular

stinger frame work and G.I. Pedestal etc. All complete as per

specifications, drawings, design intent and as directed by

Consultant / OIL.

(a) Providing at required spacing to form modular framework,

pedestals made out of GI tube of thickness minimum 2 mm and 25

mm outer diameter, fully welded on to the G.I. Base plate of size

100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mmx75mmx3.5 mm welded with GI fully

threaded stud 16mm outer diameter with two GI Check nuts

screwed on the stud for level adjustment upto 50mm, locking and

stabilizing the pedestal head in position at the required level. The

pedestals shall be fixed to the subfloor (base) through base plate

using epoxy based adhesive of approved make or the machine

screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized

of rectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully

threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive

the floor panel, this system shall provide adequate solid, rigid

support for access floor panel, the system shall provide a minimum

clear uninterrupted clearance between the bottom of the floor for

electrical conduits and wiring etc.

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

(c) Providing and fixing Access Floor panel of 600x600x32 mm

medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded

construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded

together (minimum 64 welds in each dome and 20 welds along

each flange). The panel should be Corroresist epoxy coated for

lifetime rust protection and cavity formed by the top and bottom

plate is filled with Pyrogrip noncombustible Portland cementitious

core mixed with lightweight foaming compound.

The access floor shall be factory finished with Anti-static High

Pressure laminate with Non Warp technology upto 1mm thickness

for superior adhesion and Surface flatness within 0.75mm.The panel

is to withstand a Concentrated Load of 363 kgs applied on area

25mm x 25mm without collapse in the centre of the panel which is

placed on four steel blocks. The panel will withstand and Uniformly 38.00 ₹ 5,623.95 ₹ 213,710.10

Distributed Load (UDL) minimum 1250 kg/sqm and an impact load

of 50kg all complete as per the approved manufacturers

specification. Specification must be printed on the side of the

panel to ensure the quality of the product.

300 mm Finished Floor Height (FFH)

E PEST CONTROL

Supplying chemical emulsion in sealed containers including

delivery as specified.

6.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. LITRE 150.00 ₹ 200.90 ₹ 30,135.00

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment as per following

6.2 specification :

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

Treatment of existing masonry using chemical emulsion @ one litre

per hole at 300 mm interval including drilling holes at 45 degree

a) and plugging them with cement mortar 1:2 (1 cement : 2 coarse METER 320.00 ₹ 43.00 ₹ 13,760.00

sand) to the full depth of the hole With Chlorpyriphos/Lindane E.C.

20% with 1% concentration

Treatment at points of contact of wood work by chemical emulsion

Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5

DSR 2023 Item litres per hole by drilling 6 mm dia holes at downward angle of 45

no. 2.35.5 degree at 150 mm centre to centre and sealing the same.

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

F WATER PROOFING

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom, pantry & balcony etc., by applying cement slurry

mixed with water

DSR 2023 Item proofing cement compound consisting of applying :

no. 22.5 (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/ sqm. This layer will be

allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with

water proofing cement compound @ 0.126 kg/sqm. This layer will

be allowed to air cure for 4 hours followed with water curing for 48

The rate includes preparation of surface, treatment and sealing of 142.00 ₹ 617.05 ₹ 87,621.10

all joints, corners, junctions of pipes and masonry with polymer

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

III INTERIOR & FURNISHING WORKS

Providing and fixing Fixed in Situ non load bearing Aluminium

Frame Work for Wooden Ceiling : Reception/ Video Conference /

HOD / VIP Visitor / Cafeteria/ All Meeting Rooms / Lift Lobby

Framework of mainly extruded. Aluminium section 14 guage 50 mm

x 50mm, and angle 35mm x 35mm x 3mm thick frame work @ 600

mm centre to centre both ways. Suitable hangers and "L" angle

10.1 screw fixed to the beam/wall/partition with nylon sleeves and KILOGRAM 1,800.00 ₹ 414.30 ₹ 745,740.00

screws at not exceeding 510mm c/c (centre to centre). ( The item

includes cost of material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium frame work.

Nothing extra shall be paid on this account).

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

Providing & fixing Seamless Ceiling with 8 mm Hilux Calcium Silicate

Board ( All wet area) including providing & fixing of framework

made of special section, power pressed from

Based on DSR M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both

Item no. 12.59.1 side inclusive) as per IS : 277 and consisting of angle cleat of size

25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at

1200mm c/c, one flange fixed to the ceiling with dash fastener

12.5mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm

of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm

running at the spacing of 1200 mm c/c, to which the ceiling section

0.5mm thick bottom wedge of 80mm with tapered flanges of 26

mm each having lips of 10.5mm,at 450mm c/c, shall be fixed in a

direction perpendicular to G.I intermediate channel with

connecting clip made out of 2.64mm dia x 230mm long G.I wire at

every junction, including fixing perimeter channels 0.50mm thick

27mm high having flanges of 20mm and 30mm long,

the perimeter of ceiling fixed to wall/ partitions with the help of

Raw plugs at 450mm centre, with 25mm long dry wall screws @

230mm interval, including fixing of Calcium Silicate Board to ceiling

section and perimeter channels with the help of dry wall screws of

size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush

finish of tapered and square edges of the board with

recommended jointing compounds, jointing tapes, finishing with

jointing compounds in three layers covering up to 150mm on both 26.00 ₹ 1,572.30 ₹ 40,879.80

sides of joints and two coats of primer suitable for boards, all as per

manufacture’s specification and also including the cost of making

opening for light fittings, grills, diffusers, cut outs made with frame of

perimeter channels suitably fixed but excluding the cost of painting

All complete as per specifications, drawings, design intent and as

directed by Consultant / OIL.

10.3 PLAIN GYPSUM BOARD CEILING

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of

size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm,

at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

DSR Item no. flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

12.45 required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm

dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling

fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges

of the board with recommended jointing compound , jointing tapes

, finishing with jointing compound in 3 layers covering upto 150 mm

on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

DSR Item no. 12.5 mm thick tapered edge gypsum plain board conforming to IS: SQUARE

12.45.1 2095- (Part I) :2011 (Board with BIS certification marks) METER

10.4 GI METAL CEILING

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross "T" of size 24x25 mm made of 0.30

mm thick (minimum) sheet, 1200 mm long spaced between main

"T" at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of

0.30 mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall angle of

size 24x24x0.3 mm and laying false ceiling tiles of approved texture

in the grid including, required cutting/making, opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc.

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50

mm long dash fasteners, 4 mm GI adjustable rods with galvanised

butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm

center to center along main T, bottom exposed width of 24 mm of

all T-sections shall be pre-painted with polyester paint, all

complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color

tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of

GI sheet having galvanizing of 100 gms/sqm (both sides inclusive)

DSR Item no. and 20% perforation area with 1.8 mm dia holes and having NRC SQUARE

12.52.2 (Noise Reduction Coefficient ) of 0.5, electro statically polyester METER

powder coated of thickness 60 microns (minimum), including

factory painted after bending and perforation, and backed with a

black Glass fiber acoustical fleece.

Providing and fixing mineral fibre false ceiling tiles at all heights of

size 595X595 mm of approved texture, design and pattern. The tiles

should have Humidity Resistance (RH) of 99%, Light Reflectance ≥

85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance

as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section

of 0.33 mm thick (galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000mm, cross T of size 15x32 mm of

length 1200 mm and secondary intermediate cross T of size 15x32

mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item

10.4b 26.27 (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash

fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm

length and L-shape level adjuster of size 85x25x2 mm, spaced at

1200 mm centre to centre along main ‘T’. The system should rest on

periphery walls /partitions with the help of GI perimeter wall angle

of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to

the wall with help of plastic rawl plug at 450 mm centre to centre &

40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted

with polyester baked paint, for all heights. The work shall be carried

out as per specifications, drawings and as per directions of the

engineer-in-charge

With 20 mm thick beveled tegular mineral fibre false ceiling tile SQUARE

(NRC 0.7) METER

10.5 ROCK WOOL THERMAL INSULATION

Providing and fixing thermal insulation with Resin Bonded rock wool

conforming to IS: 8183, having density 48 kg/m3,50 mm

DSR Item no. thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with SQUARE

12.62 screw, rawel plug & washers and held and in position by criss METER

cossing GI wire etc. complete as per directions of Engineer in-

11.6 HIGH PRESSURE LAMINATED SHEET FACING

Providing & fixing decorative high pressure laminated sheet of

plain /wood grain in gloss / matt/ suede finish with high density

9.127 protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

11.9 ALUMINIUM FRAMING

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge.

(Glazing, paneling and dash fasteners to be paid for separately) :

a) 21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required

b 21.1.1.1 shade according to IS: 1868, Minimum anodic coating of grade AC KG 200.00 ₹ 433.95 ₹ 86,790.00

11.24 BACK PLY/ BOARD

Providing and fixing 6mm thick both sides Pre-laminated cement

bonded wood particle board as per IS : 15786:2008 of approved

brand and shade with suitable full threaded steel screws etc. on SQUARE

the backing of racks, drawer, cupboard, kitchen cabinet under METER

kitchen counter etc. all complete as per direction of Engineer in-

ITEM DSR-2023 NDSR AMOUNT

REF NO. PARTICULARS UNIT QUANTITY RATE

NO. AMOUNT (INR) (INR.)

Providing and fixing cupboard shutter with 19mm thick one side

decorative and other side balancing lamination factory pressed

BWP grade marine ply as per IS 710 of approved brand including

2mm thick PVC edge banding tape with hot glue by edge bending SQUARE

machine etc. with auto closing spring loaded hinges (hydraulic METER

type) etc. complete as per direction of Engineer in-

charge.(Payment of providing and fixing auto closing hinges shall

be paid separately)

Providing and fixing 19mm thick both side balancing lamination

factory pressed BWP grade marine ply as per IS 710 of approved

9.169 brand boxes, shelves, racks, almirah, cupboard and drawer etc. 431.00 ₹ 2,339.60 ₹ 1,008,368.00

including necessary nails,screws etc. complete as per direction of

Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0

degree hinges (hydraulic type) of approved make/brand to

11.27 9.171 cupboard shutters with full threaded steel screws including making EACH 684.00 ₹ 226.75 ₹ 155,097.00

necessary recess in board and finished etc. complete as per

direction of Engineer-in-charge

Extra for providing lipping with 2nd class teak wood battens 25 mm

9.23 minimum depth on all edges of flush door shutters (over all area of 40.00 ₹ 401.40 ₹ 16,056.00

door shutter to be measured).

12.12 VISION PANEL

Extra for providing vision panel not exceeding 0.1 sqm in all type of

9.24 flush doors (cost of glass excluded) (overall area of door shutter to

a 9.24.1 Rectangular or square 40.32 ₹ 173.95 ₹ 7,014.00

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door

shutters (overall area of door shutters to be measured).

a 9.25.1 Decorative type door 17.28 ₹ 354.55 ₹ 6,127.00

GRAND TOTAL OF CIVIL & INTERIOR WORKS ₹ 11,114,266.55

GRAND TOTAL OF CIVIL & INTERIOR WORKS ₹ 11,114,266.55

Add CPWD circular dated 08.08.2024 for labour Cess on DSR

Add Cost Index @1.03 on DSR items 11,138,606.79

1. CIVIL & INTERIOR WORKS

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Individual rates are adopted from average budgetary quotations (

copies enclosed) Rates are exclusive of GST

Dismantling existing filling of any type of material in sunken /

raised portion of the flooring including disposal initally to Ground

floor in the area earmarked by EIC and susequently to the CUBIC

location approved by Municipal Authorities. All complete as per METER

specifications, drawings, design intent and as directed by

Engineer- in charge/ OIL

Providing and fixing in position approved MS steel welded wire

mesh 15mm X 15mm X 1.60mm at junction of masonry and

4.3 NDSR 2 concrete surfaces or elsewhere. 30.00 ₹ 495.00 ₹ 14,850.00

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

4.7 NSDR 5 PVC FLOORING

Providing and laying of 2mm conductive Vinyl rolls as specified

and indicated. The cost to include preparing surface to receive

vinyl flooring requirements like the floor to be absolutely leveled,

hard, dried, even and free from dirt, grease, moisture , and fixed

using required adhesive ( water based adhesives like Arobond 44

of Colourbond mktg/VC 31 of Pidilite Ind. ) and correct laying

technique. The make of vinyl flooring shall be of of which the

specs / samples have to be submitted for approval.

Flammability : B1 Class

Sound Absorption : 3 dB

Sheet width/length : 180/16-25 cm/m

Tile side length : 60.8/60.8 cm/cm

Total wt : 2.9 kg/m2

Colour fastness : 6 stage

Electrostatic loading limit : <2 Kv

Thermal resistance : 0.010 m2K/W 24.00 ₹ 2,654.00 ₹ 63,696.00

4.8 NSDR 6 CARPET TILE FLOORING

Providing & fixing of Tufted / Textured / Graphic Loop Pile Carpet

Tile flooring of approved make & shade for Medium- Heavy duty

Commercial applications, having pile height of 9mm, tufted

Weight of 24-26 oz/yd2, average density >7,000 oz/yd3 , 100%

Solution Dyed, 8.0 Stitches per Inch, 0.112 in Finished Pile

Thickness, Primary Backing of non-woven Environment friendly,

Recyclable, PVC Free, with high recycled content material.

Fiberglass Reinforced Thermoplastic Composite Secondary

Backing containing not less than 39% post consumer and/or post

industrial material content, Soil Protection, Class I Radiant Panel

confirming to ASTM E 648, NBS Smoke < 450 confirming to ASTM E

662, Must pass both Part 2 and Part 3 of AATCC 174 with a

minimum of 90% reduction both gram negative and gram positive

bacteria and no macroscopic growth against the fungi., Built-in

Permanent Conductive Fiber Electrostatic Propensity of Less Than

3.5 kV, including covering of the laid carpet with 1mm. Thk plastic

sheets, with proper taping of the joints and shampooing of the

carpet prior to handover all complete as per the approved

manufacturers specification and as per the direction of Engineer-

4.9 NSDR 7 SELF LEVELLING SUBSTRATE

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing and fixing one part, polymer modified, trowel &

pumpable self levelling fast hardening cementitous underlayment

substrate having layer thickness not more than 5 mm for carpets,

linoleum, PVC sheet or carpets Compressive Strength after 28 days SQUARE

>25 N/mm², Tensile Strength in Flexure after 28 days > 5 N/mm2 METER

(+23°C), Consumption 1.6 kg/m²/mm, including cleaning the

surface of all dirt, scales, oil, grease and foreign material etc.

Wooden Flooring

Supplying, fitting and fixing 8mm thick Waterproof Laminated

wooden Flooring Work conforming to EN13329:2006 with plank size

not less than 1200 mm X 190 mm (with unilin/tongue-groove

locking arrangement) having 0.2mm thick top abrasive layer over

a decorative layer followed by a High-density fibreboard (HDF)

4.10 NSDR 8 having density > 850 kg/m3 substrate core over a resin saturated 99.00 ₹ 6,987.00 ₹ 691,713.00

backing layer and installing through unilin or tongue- groove

system (having locking strength not less than 1000 kg/m) over a 2

mm thick underlayer polyurethane foam on polythene sheet 250

microns, over a smooth, flat, hard subfloor free from moisture (base

rate @ 2500sqmt)

Skirting & Accessories

Supplying & fixing of Laminate Floor Accessories (Skirting, End

edge, Tmoulding Reducer) to 8mm thick Laminated wooden

Flooring Work conforming to EN13329:2006 with plank size not less

than 1200mmX 190 mm (with unilin/tongue-groove locking

arrangement) having 0.2mm thick top abrasive layer over a

decorative layer followed by a High-density fibreboard (HDF)

having density > 840 kg/m3 substrate core over a resin saturated

backing layer and installing through unilin or tongue- groove

system (having locking strength not less than 1000 kg/m) over a 2

mm thick underlayer polyurethane foam on polythene sheet 250

micron, over a smooth, flat, hard subfloor free from moisture (<

8%), grease etc. complete in all respect

Sports Flooring

Providing and fixing of SPORTS FLOORING with roll dimensions of

1.8 meters width and length of 20 meters and thickness 4.5mm to

laid on hard, levelled, smooth and moisture free sub floor. Sports

flooring should have traffic classification 33 and weight of 2.8-3.4

kg/m2. Flooring should have caster chair EN-985 tested with color SQUARE

fastness of more than 6. It should be ASTME662 qualified on Smoke METER

density test. Product must be fire rating of the product should be

Bfl-S1. Any Joints in flooring rolls should be sealed with cold

welding.As per approved shade and colour as per the satisfaction

Engineer - in -Charge

Providing and laying machine cut, prepolished, Engineered Stone

slabs in flooring. Cut to shapes Stone slabs laid in required pattern

over 20 mm (average) thick base of cement mortar 1:4 (1 cement

: 4 coarse sand) laid and jointed with white cement slurry @ 4.4

kg/sqm including Grouting the joints using epoxy grout mix of 0.70

5.3 NDSR 11 kg of organic coated filler of desired shade (0.10 kg of hardener

and 0.20 kg of resin per kg), to match the marble shade

including rubbing, curing. Pattern using Arcadia ( Basic rate of

stone Rs.3015/- Per Sq. Mtr.). All complete as per specifications,

drawings, design intent and as directed by Engineer- in charge/

a) 18 mm thick Engineered Stone slabs. 25.00 ₹ 4,658.00 ₹ 116,450.00

Providing plastic sheets with 25 mm thick POP for protection on tile

/ stone flooring till completion and complete cleaning prior to

5.4 NDSR 12 handing over the complete works. 782.00 ₹ 223.00 ₹ 174,386.00

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

Floor Protection Sheet

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing & laying Floor Protection Sheet of 5mm thickness, and

having tear strength of > 4 Kg./ Cm. & dart Impact of 1000 gms

supplied in roll form of width 1.4mtr as follows :

Clean the floor of all dust particles and wet mop the floor. Spread

the floor protection sheet on the floor, floor protection sheets

should be butt jointed using adhesive tapes / double sided tape. SQUARE

Floor protector sheet should be terminated over the skirting with METER

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

Providing and fixing 8 mm wide and 4 mm thick brass strips in

joints of stone flooring.

5.7 NDSR 14 All complete as per specifications, drawings, design intent and as 20.00 ₹ 450.00 ₹ 9,000.00

directed by Engineer- in charge/ OIL

Providing and fixing Polished Brass Level Difference Z Profile

5.8 NDSR 15 All complete as per specifications, drawings, design intent and as 60.00 ₹ 2,760.00 ₹ 165,600.00

directed by Engineer- in charge/ OIL

Providing and Fixing Skirting to curved partition as follows :

5.9 NDSR 16 All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

a 50mm high Backing of 2 layers of 6mm thick flexi ply. 20.00 ₹ 740.00 ₹ 14,800.00

50 mm high, 2.5 mm thick Flexible Aluminium Skirting profile RUNNING

anodized in approved colour. METER

Providing and placing in position Foot Mats cut to size and as per

following specification:

Heavy Duty matt 11.4 mm thick and weight of 8.5 Kg/M2 made of

durable, flexible open mesh structure of vinyl ribs, featuring a

continuous Z-patterned surface. The matting should also pass

flammability test as per ASTM D 2859 along with flooring radiant

panel test as per ASTM- E-648 having NFPA Class 1 classification

0.45 watts/cm² . 9 mm thick and weight of 4.1 Kg/M2 .,a looped- SQUARE

pile, carpet-type entryway matting .Matt with unique tufted METER

construction with random pattern design.Matting should pass

flammability test as per ASTM D 2859 along with flooring radiant

panel test as per ASTM- E-648 having NFPA Class 1 classification at

0.45 watts/cm² .

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

Providing and placing in position Natural Coir Foot Mats of size

60cm x 90cm having high density coir to properly clean the shoes.

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

Providing and Fixing 6mm thk. Mirror (with 3mm X 3mm bevelled

edge) of approved make adhesive bonded to 18mm thk. Marine

plywood fixed to wall / block work surface, including preparation

of the base surface for mounting of ply including all sides of

backing marine ply finished with spray applied automotive grade

paint matching to adjacent wall tile / paint colour complete in all

respects as per detail drawing and providing cut-outs wherever

necessary as per MEP requirements.

All complete as per specifications, drawings, design intent and as

directed by Engineer- in charge/ OIL

Extra for adding 25 x 25mm aluminium section at the back of mirror RUNNING

and provision for LED Strip light METER

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Extra for adding 25 x 25mm aluminium section at the back of mirror

c) 19.3 and provision for LED Strip light and 75mm x 75mm Western 102.00 ₹ 2,030.00 ₹ 207,060.00

Hemlock Wood. Wood edging to be finished in PU matt finish.

8.2 NDSR 20 Urinal Partition

Providing and fixing Curved shaped urinal partition with frosted

glass 8mm thick 900mm high and 450mm wide complete with

brackets fixed to wooden cleats with CP brass screws with

concealed fittings arrangement of approved quality and colour.

8.3 NDSR 21 Toilet Cubicle

Providing and Installation of cubicles of approved make of width

and depth as per specifications/ site drawings. Cubicle height to

ITEM DESCRIPTION

Made from solid grade compact high pressure laminate as per

IS:2046 manufactured under high specific pressure > 5 MPa and

temperature >120oC with bunch of kraft papers impregnated with

thermosetting phenolic resin and decorative papers made of

Alpha cellulose fiber impregnated with thermosetting melamine

resin which provide superior scratch, abrasion, heat, chemical,

impact, graffiti & moisture resistance along with anti-bacterial

properties. Panels have a black core that when machined,

presents a distinctive black edge. Panel thickness 12 mm. Design

no. as specified by Arch. / Engr. in suede finish. Size of panels to

be as per drawing and verified as per site.

HARDWARE & ACCESSORIES

• Rectangular head frame structure made from Stainless steel

grade 304. Surface finish to be brush type. A thin plastic film

pasted for surface protection.

Size to be 55mmx42mmx1.6 mmT.

Corner joinery section made from Stainless steel grade 304.

Surface finish to be brush type. A thin plastic film pasted for

surface protection. Size to be 35mmx15mmx0.8 mmT.

Wall joinery section with hamming profile made from Stainless steel

grade 304. Surface finish to be brush type. A thin plastic film

pasted for surface protection. Size to be 21mmx16mmx0.8 mmT.

• Adjustable Palm Design Pedestal Footing of base diameter 64

mm made from Stainless steel grade 316 giving a clearance

height of 150 mm. Surface finish to be matt type.

• Spring loaded Butt Hinges made from Stainless steel grade 304.

Surface finish to be matt type. Covers to be lacquer coated.

• Conical shape Coat hook with rubber stopper made from

Stainless steel grade 304. Surface finish to be matt type.

• Round Door knob diameter 30 mm with grooves for better hand

grip made from Stainless steel grade 304. Surface finish to be matt

• Rotating Thumb-turn locking system with privacy indicator made

from Stainless steel grade 304. Surface finish to be matt type.

• Anti-noise rubber padding of thickness 2 mm and width 10 mm

• Stainless steel grade 304 screws.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Partition system made out of Aluminium Extrusions around 2mm

thick and anodised around 15 micron.Size 25x45mm at top and

bottom .The Partition to have vertical portals to house the service

cable.The portals to be on the door side as well as on the corner

and junction with solid wall.

The wall starter shall be 105/more x105mm/more.The partition

sections to be suitale to be clubbed with any type of door frame

and door shutter(Sliding or hinged door). The sections to be stable

enough to accept glass thickness 10mm toughened glass also.The

partition sections to be available in anodized finish in any RAL

color as approved by the architects.The Partition should be

demountable and easy to install and maintain.The glass joints to

be finished with matching aluminium alloy I,T and corner sections

suitable for 10mm thick toughened glass.Color of frames: Matt

black /Andonised finish.

Std Sizes (W x D x H)- 950 mm x 1550 mm x 1980 mm ( Height is

including 150 mm gap from bottom) Door Size- 600 mm

Providing & fixing following accessories in disabled toilet made of

seamless bacteria resistance grade polyamide (nylon) of diameter

30 mm x 3.2 mm in the toilet for physically challenged persons as

per following specifications:

Basin guard rail 400 (480)* x 250* - 1 no.

L-safety support 320 (400)* x 720 (800)* - 1 no.

Vertical & Horizontal 970 (1050)* - 1 no.

Basic rate of complete set @ Rs. 9,500/-

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge

TOILET VANITY COUNTERS WITH MS FRAME AND QUARTZ STONE

SLAB COUNTER TOP

Providing and fixing hand wash/toilet counter with top in

approved sample quartz stone of 20 mm thickness laid on 19mm

thick marine ply backing supported on double Framework of MS

30x30x3mm sq. pipe fixed to wall by anchor fasteners as directed.

MS 30x30x3mm sq. pipe to be finished in approved enamel paint,

Providing 230mm high front facia and band 200mm high above

the counter in same shade quartz stone. All exposed surfaces of

platform to be finished in same quartz stone. Necessary cut-outs

for sink to be provided and all cut-outs, exposed edges to be bull

nosed with mirror polish. Cost to also include making necessary cut-

outs for taking pipes through counter top. Cost of quartz stone Rs.

6500/sqm. Counter top to be measured and paid for.

9.2 NDSR 24 Pantry Counter Top

Providing and Fixing to pantry cabinet top 18mm thick WPC board

and finishing the same using Engineer Quartz Stone slab using

suitable adhesive and 2mm spacer with ms frame work. including

rubbing, curing,buffing etc. Item includes filling the grooves /

joints and Grouting the joints using epoxy grout mix of 0.70 kg of

organic coated filler of desired shade (0.10 kg of hardener and

0.20 kg of resin per kg), and finishing complete. All complete as

per specifications, drawings, design intent and as directed by

Engineer in charge / OIL.

i) NDSR 24 .1 18mm thick Engineer Quartz Stone 4.00 ₹ 8,514.00 ₹ 34,056.00

Extra for making 50mm wide edging, chamfering the corner by RUNNING

2mm and polishing the same. METER

Artificial Vertical Green Wall Plant/ Ceiling suspended Creepers

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Size: 40cm x 60cm, 40cm x 90cm, 50cm x 50cm

Patterns: As per Approved by client & Engineer in charge

Providin & fixing Artificial silk plants with combination 3 or 4 types

uniformaly ditributed plants on wall as well as ceilig suspended

creepers with necessary wire or hangin arranement included. 25.00 ₹ 6,259.00 ₹ 156,475.00

Plants which ultraviolet blocking chemicals are impregnated into

the materials during the manufacturing process. These chemicals

are blended with the plastic or PVC parts Installation Installation is

done on Waterproof ply board with staple gun machine.

9.4 NDSR 26 NATURAL MOSS BREATHING PANLES (NORDGRONA PIXELS)

Supply & fixing of NATURAL MOSS BREATHING PANLES . Each panel

is 5 x 5 x 6 cm and weighs 30 g. The panel is a high-class sound

absorber made from natural, hand-picked Moss. The panel

element is designed to cover large surface areas with maximum 25.00 ₹ 10,500.00 ₹ 262,500.00

flexibility in shape and design. Each Pixel element retains its colors,

is fire-proof, absorbs & releases humidity to remain soft, and is

completely maintenance-free. Per sqm requires 400 pxl

9.5 NDSR 27 ROLLER BLINDS

Supplying and fixing Roller Blinds to the following specifications ,

Fabric shade as approved, sunscreen, dense basket weave 5 %

openness factor. Operation: - Manual. Offset side-mounted metal

chain operated Mounting: Pocket mounted. Shade Orientation: SQUARE

Regular roll, shade cloth falls at window side of roller. METER

Configuration: Single band AVERAGE LENGTH OF BLIND is 2.0 M to

2.5 M. The fabric to be Fire Retardent certified.

9.6 NDSR 28 BLACKOUT ROLLER BLINDS

Supplying and fixing of Blackout blinds to the following specs.

Black-out material fibre-glass coated fabric, 12 mils thick, 62

threads per sq in., 0.750 lbs per sq in. (441g per sq mt.)

Operation: - Manual. Offset side-mounted metal chain operated

Mounting: Closure Box in metal

Shade Orientation: Regular roll, shade cloth falls at window side of

Configuration: Single band

The Fabric to be as per approved sample (Fabric should be Fire

Retardent Certified).

Cellular Semi Opaque 100% Polyester Hardware

SpecificationHeadRail: Head rail is 17 mm high and 47 mm wide,

Thickness 1.00 mm. It is made up of powder coated high strength

aluminum alloy covered by two end caps made up of PVC.Drum

& Cradle: They are molded ABS components with high strength

metalic drum which are meant for controlling the lifting

cord.Bottom Rail: This is Aluminum Extruded Rail Made up of High

Strength Aluminum alloy, Which is powder coated in SQUARE

white.Installation Bracket: It is made up of mild steel with zinc METER

plate.Bottom Rail End Cap: It made up of high strength ABS.White

Cord: It is made of Nylon braided non stretchable thread of 1.2

mm thickness.PVC Slip : It is made up of high strength PVC of

width 25 mm.Fabric: 100% spun bonded non-woven polyester

translucent fabric Pleat dimension 3⁄4” hexagonal cell with a

distinct air pockets Sanitized, Weight : 145 + 5% GSM, Thickness :

0.14 -0.17, colour fastness of light – 4-5 Grade ( DIN EN ISO105-B02).

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

S-contour blind Roller Tube: Made up of High Strength Anodized

Aluminum alloy Extruded grooved tube. Size: 40 mm outside

diameter (+ 2%); weight = 220gms/running mtr. Control Unit with

Clutch Mechanism: The control unit is made of high strength

reinforced plastic. The clutch is of warp spring design. High carbon

steel springs are provided to transmit motion from the driven

mechanism. Clutch is operated directionally by the use of beaded

9.6.2 endless chain to raise and lower the blind smoothly to decide 11.00 ₹ 8,489.00 ₹ 93,379.00

height. Idler: Idler is of high strength reinforced plastic, consisting

of an outside sleeve and center shaft. Sleeve provide bearing

surface for center shaft and rotate freely, providing smooth, quiet

and long wearing operation. Bottom Rail: This is made up of high

Strength Aluminum alloy Extruded tube, which is powder coated in

white. Size: 51 + 1mm Width. ; Weight = 215 gms/running mtr

(5%).Fabric : composition 100% polyester &fabric width 275 cm .

9.7 NDSR 28.1 Providing & fixing Motor Mechanism Nos. 28.00 ₹ 25,100.00 ₹ 702,800.00

9.8 NDSR 28.2 Providing & fixing Motor Remote 16 channel Nos. 16.00 ₹ 17,860.00 ₹ 285,760.00

III INTERIOR & FURNISHING WORKS

10.4a MINERAL FIBRE FALSE CEILING

Providing and fixing mineral fibre false ceiling tiles at all heights of

size 300X1200mm of approved texture, design and pattern. The

tiles should have Humidity Resistance (RH) of 99%, Light

Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K,

Fire Performance as per (BS 476 pt - 6 &7), suitable for Green

Building application, with Recycled content of >35% in true

horizontal level suspended on interlocking T-Grid of hot dipped all

round galvanized iron section of 0.33 mm thick (galvanized @120

gsm) comprising of main T runners of 15x32 mm of length 3000 mm,

cross T of size 15x32mm of length 1200 mm to form grid module of

size 300x1200 mm suspended from ceiling using galvanized mild

steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-

6 dash fasteners, 6 mm diameter fully threaded hanger rod up to

1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’.

The system should rest on periphery walls /partitions with the help

of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm

thick sheet, to be fixed to the wall with help of plastic rawl plug at

450 mm centre to centre & 40 mm long dry wall S.S. screws. The

exposed bottom portion of all T-sections used in false ceiling

support system shall be pre-painted with polyester baked paint, for

all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-in-charge.

With 20 mm thick beveled tegular mineral fibre false ceiling tile SQUARE

(NRC 0.9) METER

Providing and fixing to framework,BWR Ply base as per following

specifications:

12 mm th. marine Ply fixed with fully threaded parallel shank SQUARE

screws at max.230 mm c/c both ways. METER

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge/OIL

Providing and fixing BWR Ply as Second Skin on false ceiling ply

base as per following specifications:

6 mm th. Marine Ply fixed with suitable adhesive & fully threaded

10.7 NDSR 30 parallel shank screws at max. 230 mm c/c both ways with grooves 150 ₹ 890.00 ₹ 133,500.00

of size 6mm x 6mm or as per design intent / drawing.

All complete as per specifications, drawings, design intent and as

directed by Engineer incharge/ OIL

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing & fixing to Ply base, or elsewhere Customized fluted

decorative Veneer Ply as per following specifications:

3.5 - 4.0 mm thick Decorative wood Veneer ply of group match.

Making Flutes with CNC machine , 3-4 mm wide at 4mm centre

10.8 NDSR 31 to centre, fixing with groves as per design intent. Veneer to be

protected with polyurethane clear matt finish.

Size of Veneer ply : 1220mm x 3000mm.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing FC-2 False Ceiling in Sisal Weaved Carpet as

per following specifications :

Acoustic Sisal weaved carpet with latex backing on false ceiling

10.9 NDSR base using suitable adhesive as per manufacturers' specifications. 12.00 ₹ 5,600.00 ₹ 67,200.00

Basic rate of sisal weaved carpet is Rs. 3200/- per sqm.

All complete as per specifications, drawings, design intent and as

directed by Engineer / OIL.

Providing and fixing Accoustic Ceiling & birch ply Grid in Video

conference / meeting room as per following specifications:

230 mm high , Grid made of Birch ply Fixed in Situ non load

bearing Aluminium Framework of mainly extruded. Aluminium

section 14 guage 50 mm x 50mm , 25mm x 50mm and angle

35mm x 35mm x 3mm thick frame work @ 600 / 1200 mm

centre to centre both ways. Suitable hangers and "L" angle

screw fixed to the beam/wall/partition with nylon sleeves and

screws at not exceeding 510mm c/c (centre to centre).

Finished with 9mm thick Birch Ply on either sides. Birch Ply to be

protected with polyurethane clear matt finish. (Edges sealed with

12mm thick HDMR board or Birch Ply) with chamfered edges .

Roofing of Accoustic Panel :

Roofing of NRC acoustical panels, hardened square edge, FR

grade NRC fabric of approved colour wrapped on encapsulated

glassfibre core panels of size 600x1200x25mm, volume density 100-

120Kgs/m3, weight 3.0kg/m2 installed by using Z bars.

Z bar having 40mm height, thickness 1mm is first fixed behind the

panels by identifying resin spots by using suitable fasteners.

Provide necessary packing shims if required for line and level. SQUARE

NRC panels are then slided into the Strut Z bar. METER

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Supply of Light weight Aluminium Access Ceiling Trapdoor.

The Trapdoor can carry 12 mm thick calcium silicate

board/Gypsum Board as per site requirement to match the ceiling

finish with no visible flange and just a groove of 2-3 mm is visible

alround. The lid to be connected with trap door frame with a SQUARE

chain and locked with allen keys. The shutter lid to be connected METER

to trap door frame with steel wire and locked with allen keys.

Frame shall be Powdercoated. Rates to include Infilled material.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing and fixing approved make PVC sliding type trap door

for split ductable air-conditioning machine, inline fan and for

true ceiling mounted fire alarm system made up of white colour

flexible slats of width 100mm in PVC fixed on the surface track,

mounted on the regular wooden peripheral framework

enclosure around the opening / cutout in the false ceiling and

nailed, fixed with 19mm thick PF Board in the ceiling [false

ceiling framework in GI frame of depth 50mm peripheral

[towards one end at rolling shutter track addition depth of 300mm

with 200mm of overlap].

The said frame fabricated using vertical and horizontal

members. the vertical member is cut in 'L' shape [50x50mm] trap

door enclosure to form a carpet and grip section with slider. Sprial

track and surface track is screwed to the frame. The carpet is

rolled and inserted in the track [by widening the gap

between the two sides. The gap can be widened by inserting the

wooden piece slightly larger movement of frame restricted by

providing L-Shape flats / straps at the four corners. The 5.00 ₹ 15,100.00 ₹ 75,500.00

slate are interlocked to make the desired length of the carpet for

rolling shutter having one end closed with grip section and

the other end rolling in the spiral track with vertical brakes.

The trap doors shall be installed as per the

manufacturer specifications with beading etc.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Supply and installation of ceiling over workstation of Stretch NRC

White FR Grade Solserene fabric system with highperformance

integrated core with a white matte face covering, acoustically-

transparent textile of size 1.7mx75m. Wooden base 10mm is first

installed to the true slabs/grids on the marked lines with metal

fasteners at 300mm centers embedded in plastic sleeves. Fix Strut

FS 25 half wrap / full wrap, Midseam and Outer corner, rigid FR-

PVC high strength tracks square / bevel edge on the wooden

surface by using heavy-duty fasteners at 150mm centers on

one/both sides of Anutone Strut Tracks.

Strand magnesite bonded pinewood fibre panels of size

600x1200x20mm, density 400kg/m3, weight 8kg/m2 is

installed/fastened to slab or MS framework, in between tracks by

using suitable fasteners, SynthPF 10x25mm is then adhered on

Strand using Stick 7 adhesive. Ensure 5mm airgap between

SynthPF and NRC White fabric. The Stretch NRC White acoustical

membrane of width 3m is stretched and tucked into the Strut

Tracks and secured to the locking jaws with purpose-specific 37.00 ₹ 5,966.00 ₹ 220,742.00

tucking tools to obtain smooth, taut, wrinkle-free finish. Ensure the

weft and weave of the fabric along with the surface are all

oriented in one direction to achieve uniform shade. Note:

minimum 200mm additional fabric is required for tucking hence

maximum module wall fabric width would be 1600mm.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing pelmets to house projection screen / Blinds

made of 19 mm thick commercial ply, having clear internal

dimensions as 250/300 x 300/450mm, finished in approved

laminate on all exposed surfaces from all external surfaces and

10.14 NDSR 36 balancing laminate on all internal surfaces, supported from RCC Rmt 92.00 ₹ 1,460.00 ₹ 134,320.00

ceiling slab by necessary framework, giving additional supports in

MS angles etc. complete. All exposed edges to be finished in 6mm

thick TW beading and finished in approved colour.

IV PARTITION & WALL PANELLING

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing & fixing to RCC or elsewhere 12.5mm thick Moisture

Resistant Gypsum Board .

Levelling with mirandi wood battens if required.Screw fixing to the

battens, 12.5mm tapered edge Moisture Resistant Gypboard at

230mm centres. The boards are to be jointed and finished which

11.1 NDSR 37 includes filling and finishing the tapered and square edges of the 50.00 ₹ 560.00 ₹ 28,000.00

boards with jointing compound and fibre tape suitable for

Gypsum board. A layer of upto of 3.00mm thickness of Veneer

Plaster shall be applied followed by two coats of top coat (primer)

at the face of board to give smooth seamless finish. All complete

as per specifications, drawings, design intent and as directed by

Engineer in charge / OIL.

11.2 GYPSUM BOARD PARTITIONS

Poviding and fixing partition upto ceiling height consisting of G.I.

frame and required board, including providing and fixing of frame

work made of special section power pressed/ roll form G.I. sheet

with zinc coating of 120 gms/sqm(both side inclusive), consisting

of floor and ceiling channel 50mm wide having equal flanges of

32 mm and 0.50 mm thick, fixed to the floor and ceiling at the

spacing of 610 mm centre to centre with dash fastener of 12.5 mm

9.11 dia meter 50 mm length or suitable anchor fastener or metal

screws with nylon plugs and the studs 48 mm wide having one

flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed

at a spacing of 610 mm centre to centre by 6 mm dia bolts and

nuts, including fixing of studs along both ends of partition fixed

flush to wall with suitable anchor fastener or metal screws with

nylon plugs at spacing of 450 mm centre to centre,

11.3 GYPSUM BOARD LINING

Providing and fixing of plain gypsum plaster board conforming to

IS: 2095 Part - 1:2011 (Board with BIS certification marks) to existing

dry partition using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm

x 0.5 mm), joint finisher and two coats of primer suitable for board

as per manufacture's specification and direction of engineer in

charge all complete..

12.5 mm thick fire rated Glass Reinforced Gypsum (GRG) plaster

a NDSR 38 board conforming to IS: 2095: part 3 (Board with BIS certification 134.00 ₹ 750.00 ₹ 100,500.00

marks) on single side skining work.

12.5 mm thick tapered edged plain Gypsum plaster board

b NDSR 39 conforming to IS: 2095: (part I): 2011 (Board with BIS certification 800.00 ₹ 600.00 ₹ 480,000.00

marks) on single side skining work.

11.4 NDSR 40 TOUGHENED GLASS 10 MM THICKNESS

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions

of engineer-in-charge . (Cost of aluminium snap beading shall be

paid in basic item):

Toughened glass 10 mm thickness 286.00 ₹ 3,200.00 ₹ 915,200.00

11.5 MARINE & FIRE RETARDANT PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts &

bolts/ nails, including two coat of approved Fire retardant paint

NDSR 41 on one face, and fixed on wooden /steel frame work, complete

as per direction of Engineer-incharge (Frame work shall be paid

for separately).

a NDSR 41.1 12 mm thick fire retardant plywood conforming to IS: 5509 90.00 ₹ 1,880.00 ₹ 169,200.00

b NDSR 41.2 12 mm thick marine plywood conforming to IS: 710 1,017.00 ₹ 1,690.00 ₹ 1,718,730.00

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

11.6 HIGH PRESSURE LAMINATED SHEET FACING

Providing and fixing Fabric over cellotex board and foam.

panelling in all cabins/ Meeting as per following specification /

details. 12mm thick high Density foam , edges Chamfered

11.7 NDSR 42 wrappeed in markeen and finished in fabric. Basic rate of Fabric 24.00 ₹ 2,541.00 ₹ 60,984.00

@1800/- per Meter.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing straight line Wood work in Frames of false

ceiling, wall panelling, partition as vertical and horizontal supports

for overhead storage's, white boards, art works LCD screens etc. (

11.8 NDSR 43 including applying 2-3 coats of fire retardant paint) of locally

available best quality. All complete as per specifications,

drawings, design intent and as directed by Engineer in charge/

a) Mirandi Wood for concealed frames 5.00 ₹ 71,000.00 ₹ 355,000.00

11.9 ALUMINIUM FRAMING

11.10 NDSR 44 DEMOUNTABLE DOUBLE GLAZED ACOUSTIC PARTITION

Providing and fixing, in position JEB ('X' SERIES DOUBLE GLAZED

105X25MM PARTITIONS SYSTEMS)/ DORMA KABA(ALTERRA

DEMOUNTABLE PARTITIONS) / ALLOY PARTITION demountable

double glazed acoustic aluminium framed partition system of

appropriate size and thickness (not less than 2 mm) having sound

reduction value >45 Db, supporting height upto 2700mm with

snap on option for installating glass, the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474, including anodising up to 15-20

microns of required colour and shade, accessories ie 'T' section,

corner section & vertical "I" section between glass to glass ,glass

packing to adjust the floor level, ceiling profile, floor profile and

wall profile as per the manufacturer specification( The item

includes cost of material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium frame work.

Nothing extra shall be paid on this account), all complete as per

the architectural drawings and approved shop drawings , &

directions of engineer-in-charge.

For fixed portion

Anodised aluminium (anodised transparent or dyed to required

a) NDSR 44.1 shade according to IS: 1868, Minimum anodic coating of grade 143.00 ₹ 12,987.00 ₹ 1,857,141.00

AC 15)(rates including 10mm toughened glass)

Supply & Fixing of Aluminium Glazed Door (Single Leaf) with Glass

infill of toughened/Laminated glass with rebate door frame

System all around the door. Aluminium Stile to be formed out of

70x35mm Horizontal and Vertical Door Profile frame with clips &

seals. Door Hardware -Open Door Closer TS 90 Sleek body, Pure

8906 anti-microbial Lever Handle or as per client/architect with

b) NDSR Narrow stile Lock package and Door Drop down seal.Suitable for

Glass thickness of 10mm.The Profile shall be matt natural

anodized/Black, the Profile Manufacturer to supply all the

necessary clips, seals and fixing accessories for the system.

All Profiles to be with 1.5 mm Gauge thickness Excluding 20 Micron

Max System Height - 3000mm

Anodised aluminium (anodised transparent or dyed to required

shade according to IS: 1868, Minimum anodic coating of grade

AC 15-Area of door upto 2.50 sqm)(rates including 10mm

toughened glass) (door size 1000/1200x2400mm)

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing and fixing in position Lacquered Glass as per following

specifications: 6mm thk Lacquered glass, Glossy / Matt of various

colours. Fixing with double sided tape as per manufacturer's SQUARE

specifications. Sealing the edges with transparent silicon sealant METER

bead. All complete as per specifications, drawings, design intent

and as directed by Engineer in charge / OIL.

Providing and fixing 6mm thick Mirror Panelling with Bevelled

edges and MPG (Machine Polished Ground) edges fixed on

11.12 NDSR 46 existing base complete as per design and drawing. 13.00 ₹ 3,010.00 ₹ 39,130.00

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and cladding with 12mm thick acrylic solid surface of

approved shade over 12mm thick HDMR surface fixed over hard

11.13 NDSR 47 wood framing. Basic rate of acrylic solid surface 10.00 ₹ 18,600.00 ₹ 186,000.00

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing customized 18mm thick exterior grade fluted

MDF Board. SQUARE

All complete as per specifications, drawings, design intent and as METER

directed by Engineer in charge / OIL.

Providing and fixing Rugs as per following specifications:

Wall to floor decorative Hand-knotted & woven Pile Rug using

Weaving Technique Vertical loom, Multi weave pattern (Includes

plain weave + twill weave + loop weave + sumac weave +

knotting etc as per desired texture & weave)

Material in Warp : Cotton Yarn

Material in Weft : Pure Wool

11.15 NDSR (Other materials can be also added like bamboo silk/ banana silk/ 17.00 ₹ 15,876.00 ₹ 269,892.00

viscose/polyester/nylon along with wool to add shine and texture)

Wool Type & count : Blended New Zealand wool from ‘zero count’

Material dyeing : Synthetic Dyes.

Basic rate @ 12,901/-

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing & fixing to fibre mounted natural slate sheet making

grooves, including protecting with one coat of silicon sealer.. SQUARE

All complete as per specifications, drawings, design intent and as METER

directed by Engineer in charge / OIL.

11.17 NDSR 50 3M & EQUIVALENT SCOTCHCAL FROSTED CRYSTAL

Providing & Fixing 3M & equivalent Frosted Translucent, cast PVC,

self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customized designs, thickness of 2 mil

(0.05mm) without adhesive & 3M & equivalentil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6

kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS SQUARE

warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) METER

must be endorsed by 3M & equivalent India Limited Architectural

Market Department. Code 7725 - 324.

Application - DECORATIVE/PRIVACY FILM ON GLASS

Electronically/computer plotter cut. Applied on glass and other

rigid, clear substrates. (partitions, doors, windows etc.) Available in

3M & EQUIVALENT SCOTCH PRINT CONTROLTAC & COMPLY WALL

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing & Fixing Digitally reproduced 3M & equivalent Scotch

print decorative graphics on IJ180C (with controltac & comply

feature for direct, bubble-free application on walls) with UV

protective matte over laminate 8520 with a polyethylene-coated

paper liner. Customized imagery & the thickness of 2 mil

(0.05mm) without adhesive & 3-4mil (0.8-0.10mm) with adhesive,

having minimum tensile strength of 5 pounds/inch at 73°F (0.9

kg/cm at 23°C ). the adhesive should be Pressure activated, 70.00 ₹ 4,900.00 ₹ 343,000.00

position able, with air release channels. MCS warranty of 5yrs must

be endorsed by 3M & equivalent India Limited Architectural

Market Department.

Application - WALL MURAL-Directly pasted on POP finish wall

Conformable & durable decorative graphics directly applied on

walls, ceilings, elevator doors, partitions, pillars, aluminum cladding

etc.Note : Cost of approved image included.

Supplying & Placing of 600/1200 high Hybrid Polyber planters

sample as approved by client.

Providing and making Canadian wood - Western Hemlock

Moulding / Cornice of various sizes on existing partition/ panelling

surface. Wood to be polished/ including protecting with two

coats of sealer and two coats of polyurethene matt finish.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

a) 75x40mm approx size in auditorium 120.00 ₹ 1,600.00 ₹ 192,000.00

b) 25x50mm on curved partition panels 210.00 ₹ 1,100.00 ₹ 231,000.00

c) 25 x 12mm on curved partition panel 110.00 ₹ 410.00 ₹ 45,100.00

d) 25x6mm on curved partition panel 55.00 ₹ 205.00 ₹ 11,275.00

e) 18x6mm on curved partition panel 55.00 ₹ 205.00 ₹ 11,275.00

Providing & applying Fabric backed vinyl wall paper in Creche /

Doctor room , Conference & Meeting room, storages etc. on

existing surface with suitable adhesive as per manufacturer SQUARE

specifications. METER

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing digital printed Scanned colour images on

Canvas (with lamination) using suitable adhesive. Item includes

11.22 NDSR 55 scanning charges of the pictures provided by the OIL. All 30.00 ₹ 12,541.00 ₹ 376,230.00

complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing in position Quartz Stone Tops with moulding

for various furniture as per following specifiations:

18mm thick Quartz Stone slab. Making moulded edging,

11.23 NDSR 56 chamfering the corner by 2mm and polishing the same. 50.00 ₹ 12,366.00 ₹ 618,300.00

Using stone adhesive / Araldite.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

11.24 BACK PLY/ BOARD

MOULDED WOOD WORKS

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Providing and fixing of moulded American Oak Wood as follows:

Door Frames : of approximate cross section 125 x 62mm & 140 x

86 mm as per design. All door frames to be braced from raw floor

slab upto soffit of false ceiling / Beam. Requisite hard wood frame

work to be provided above false ceiling finish for supporting

door frame , floor springs etc. 1.00 ₹ 200,000.00 ₹ 200,000.00

Parametric Column detail : Of approximate cross section 125 x

Finish: All Wood to be sand paper to receive the final polish.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Providing and fixing of Moulded Hard Wood as follows:

Door Frames : To brace door frames / false ceiling / elsewhere.

Requisite hard wood frame work to be provided above false

ceiling for supporting door frame , floor springs etc.

Parametric Column : All camoflauged supports to be in hard CUBIC

Finish: Wood to be protected with two coats of sealer and fire

retartardent paint.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

12.3 NDSR ARCHITRAVE & DOOR SHUTTER EDGING

Providing and fixing Architrave & Edging to Door Frames /Door

Shutter and wall / partition of moulded American Oak Wood of

crossection 37mm x 19mm,52 mm x 19 mm , moulded to shape.

Wood to be polished/ protected with two coats of sealer and

two coats of polyurethene matt finish.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Mode of Measurent:

For the purpose of payment the architrave shall be measured CUBIC

along the center line in one go. METER

12.4 NDSR SKIRTING

Providing and fixing Skirting to partition and wall of moulded

American Oak Wood of crossection 37mm x 19mm, moulded to

shape. Wood to be polished/ protected with two coats of sealer CUBIC

and two coats of polyurethene matt finish. All complete as per METER

specifications, drawings, design intent and as directed by

Engineer in charge / OIL.

12.5 NDSR VERTICAL LINEAR BAFFLE CEILING

Providing and fixing Baffle Ceiling System false ceiling at all

heights of approved texture, design and pattern. The baffle fixed

with end cap at terminals and intermediate connector piece at

joints in true horizontal level suspended on interlocking Grid of hot

dipped all round galvanized iron section of 0.8mm thick

(galvanized @120 gsm) comprising of main Baffle carrier of

23X34mm 0.5mm thick of length 3000 mm, cross Secondary C

Channel (40mm x 0.8mm thick with two flanges of 15mm & 20mm)

of length 3000 mm suspended from ceiling using galvanized mild

steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-

6 dash fasteners, 6 mm diameter fully threaded hanger rod up to

1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘Baffle

carrier’.The work shall be carried out as per specifications,

drawings and as per directions of the engineer-in-charge.

Note: All support carriers to be powder coated with approved

METAL BAFFLE CEILING

25mm wide 100 mm high 0.7mm thick powder coated aluminium SQUARE

at 150mm center to center METER

12.6 NDSR ACOUSTIC BAFFLE CEILING

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

PET Acoustic Baffle 12mm width, 150mm height of length not more

than 2400 mm,with a thickness of Baffle felt 3-5mm in approved 38.00 ₹ 5,987.00 ₹ 227,506.00

colour at 150mm center to center, NRC of upto 0.5

12.6a OPEN CELL ‘LAY-IN’ ALUMINIUM CEILING WITH 15MM GRID

Providing and fixing in Open cell Aluminium lay-in ceiling tiles with

border panels forming flush-tegular/board edge of size

600mmx600mmx40mm with blade width of 10mm having Humidity

Resistance of 100% RH, and having Fire Performance CLASS

0/Class 1 (BS 476). The tile of as per approved color with cell size of

150mmx150mm/100mmx100mm.

The grid should be15mm wide T - section flanges colour white

having rotary stitching on all T sections i.e. the Main Runner, 1200

mm & 600 mm Cross Tees.

INSTALLATION: To comprise main runner spaced at 1200mm

centres securely fixed to the structural soffit. The First/Last

suspension system at the end of each main runner should not be

greater than 450mm from the adjacent wall.

Flush fitting 1200mm long cross tees to be interlocked between

main runners at 600mm centre to form 1200 x 600 mm module. Cut

cross tees longer than 600mm require independent support. 600 x

600mm module to be formed by fitting 600mm long flush fitting

cross tees centrally between the 1200 mm cross tees.

Perimeter trim to be wall angles of size 3000x19x19mm, secured to SQUARE

walls at 450 mm maximum centres METER

12.7 SKIRTING & TRIMS

Providing and fixing aluminium extruded trim/skirting profile

sections 100 mm High, thickness not less than 2mm, as per the

architectural drawings and approved shop drawings , the

aluminium quality as per grade 6063 T5 or T6 as per BS

1474,including Anodised aluminium (anodised transparent or dyed

to required shade according to IS: 1868, Minimum anodic coating

of grade AC 15) as approved by the Engineer-in-Charge. ( The

item includes cost of material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium frame work.

Nothing extra shall be paid on this account).

Providing and fixing 9mm thick ply backing ply of size 600mm X

1200mm on mineral fiber modular false ceiling tiles to support light

fitting, speakers, CCTV cameras, diffuser of grid work size with

necessary cut outs for the same.

12.9 ACOUSTIC PANELS 9MM THICKNESS (NRC) 0.94

Providing & fixing acoustic panels any size and shape in

approved color and code no. with Standard size & 9mm

thickness. acoustic Panels should have Sound Absorption

coefficient (NRC) 0.94. Formaldehyde emission standards of

GB18580-2001 class E1, it is a green material with asbestos-free,

non-toxic and tasteless gas under extreme temperature, SQUARE

protecting the ozone layer, non-irritant and recyclable. acoustic METER

panels have to be Fire-resistant . Good insulation properties, to

prevent transmitting the heat from outdoor to indoor directly as

partition or and ceiling, saving 35% of energy, extending the life of

air conditioning. acoustic panels are Light weight and allow free

cutting with paper knife.

12.10 FLUSH DOOR SHUTTER

Providing and fixing ISI marked flush door shutters conforming to IS

: 2202 (Part I) decorative type, core of block board construction

with frame of 1st class hard wood and well matched teak 3 ply

veneering with vertical grains or cross bands and face veneers on

both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with SQUARE

necessary screws METER

Providing and fixing Hardware as per following specifications with

necessary screws, etc.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Door closer for Door Width 850-1100 mm and Door Weight 40-80

kg, with standard arm

Ball bearing Butt Hinges, 5"x3"x3" Loading Capacity up to 80 kg per

3 hinges SS finish

c Tower Bolt : Flush bolt EACH 8.00 ₹ 1,032.00 ₹ 8,256.00

Mortise Locks , Handle, cylinder, lockbody, One side key and one

d side knob 60 mm, for max door thickness - 40 mm - SS Finish, HBS 31 EACH 45.00 ₹ 7,389.00 ₹ 332,505.00

FSL: Sash Lock DIN Left/Right CTC 72 & Backset 55 SS Finish

e Door Stopper : door drop stop SS Finish EACH 45.00 ₹ 915.00 ₹ 41,175.00

Supply & fixing of extruded aluminum body Heavy duty fire rated

door closers with stainless steel full body cover. The door closers

should be of type-1-6, Non handed, back check, delayed action

f and tested along with the wooden fire doors from CBRI Roorkee as EACH 2 ₹ 2,710.00 ₹ 5,420.00

per BS476 part-22 and IS 3614 Part-2. The door closer shall have 10

years mechanical warranty from the manufacturer and complies

with EN 1154- for 50000 cycles + A1: 2002 CE certified.

Supply and installation of smoke and heat extraction system for

top-hung outward casement with 2 mechanical casement locking

devices and with 2 spindle drives, with electro-mechanical

overload cut-out, enclosure rating IP 65. Galvanised steel parts.

12.15 NDSR Casement size: as per site (Approx. 1200 x 1200mm), EACH 4.00 ₹ 66,000.00 ₹ 264,000.00

Approved Manufacturer :

GEZE , SIMON, TIPTRONIC SYSTEM

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

XII FIRE BARRIERS

13.1 NDSR Through Penetration on Floor/wall for annular gaps up to 50 mm

Provide Acrylic Firestop Sealant in gaps around non combustible

penetrants like ducts or metal pipes passing through floor slab to

provide minimum 2 hours fire rating when subject to the test

conditions of UL 1479/ASTME 814 standards. The product shall be

age tested as per DafStb guidelines. Sealant should provide

sufficient MAF, water and gas tight seal. Sealant shall also provide

airborne sound transmission reduction (STC of 50) and shall be

tested as per DIN 52210 for sound insulation. Sealant shall carry test

certificate for mold resistance rating of 0 as determined by ASTM

G21-96 and should have a VOC content of approx. 75 g/l as per

The sealant shall carry test certificate in accordance with IEC

60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for

Vibration-Time-history method and VERTEQII for seismic zone 4. The

system shall be UL listed & classified and product shall bear the UL

and FM approval logo on the packing. If none of UL test

certificate comply with actual application, an EJ document

prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be producted by

A firestop submittal shall be produced by manufacturer , in

accordance with approved passive fire protection method

statement, for technical approval. Firestop installation shall be

done by certified installers. Firestop Speciality Contractor needs to

submitt work completition certificate along with installation report

through Hilti documentation Software CFS DM for periodic

inspection & maintenance purpose. The gaps around combustible 4.00 ₹ 44,260.00 ₹ 177,040.00

penetrants like plastic pipes or ducts with insulation shall be sealed

with an appropriate intumescent technologySealants. In case of

repenetration requirement, intumescent based speed sleeve of

appropriate size shall be used.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

13.2 NDSR Intumescent firestop Sealant for floor/wall FS One Max

Provide high performance intumescent firestop sealant around

combustible penetrations like plastic pipes or ducts/pipes with

insulation passing through floor to provide minimum 2 hours fire

rating when subject to test standards of UL 1479/ASTM-E 814. The

sealant shall have surface burning characteristics according UL

723 (ASTM E84-96): Flame spread index 0 and smoke development

index 5. The sound transmission classification according to ASTM E

90-99 shall be 56 (STC Rating). Sealant shall have mold and mildew

resistance and the performance shall be Class 0 according to

Movement capability approx.. 5% (ISO 11600) and the average

volume shrinkage is 24% according ASTM C1241. Sealnt shall meet

LEED requirements for indoor environmental quality credit (4.1 and

4.2) with a VOC content of 9 g/l. Seismic tested on mechanical

performance, smoke and fire-ratings. The product shall be age

tested as per Dafstb and DIBT standards.The system shall be UL

listed & classified and product shall bear the UL and FM approval

logo on the packing. If none of UL test certificate comply with

actual application, an EJ document prepared by a qualified

personnel and based on nearest third party tested & approved

systems like UL test certificates & in accordance with IFC

guidelines shall be producted by manufacturer.

A firestop submittal shall be produced by manufacturer , in

accordance with approved passive fire protection method

statement, for technical approval. Firestop installation shall be

done by certified installers and UL system test certificates or

approved EJ document. Firestop Speciality Contractor needs to

submitt work completition certificate along with installation report

through manufacturer documentation Software for periodic

inspection & maintenance purpose.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

(i) Duct/pipes with insulation 3.00 ₹ 75,700.00 ₹ 227,100.00

(ii) Plastic Pipe diameter of 1'' EACH 10.00 ₹ 2,000.00 ₹ 20,000.00

13.3 NDSR Through Penetration on Wall (Medium to large size i.e. 4" gaps)

COS ( Composite Sheet) system on both sides of wall for 2 hours

fire rating when tested in accordance with ASTM E 814/UL 1479

standards. The Composite Sheet 3.81 mm thick, bonded with

organic/inorganic fire-resistive elastomeric #SS 304 (Stainless steel)

sheet. One side it should be bonded with 26 gauge #SS 304

(Stainless steel) sheet and the other side it should be reinforced

with hexagonal shaped #SS 304 (Stainless steel) wire mesh and

covered with aluminum foil for the penetrants and the big

The small gaps left around the penetrants should be closed with

Intumescent sealant of approved make, or with Fire rated

Moldable Putty, which should be soft & moldable to any shape, to

give complete L Rating. This system is to seal all fire rated

horizontal in Floor made of concrete, masonry, metal, gypsum

partition, after passing service lines like Ducts or Metal pipes.

The system shall be UL listed & classified and product shall bear the

UL & FM approval logo on the packing. If none of UL test

certificate comply with actual application, an EJ document

prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be producted by

Provide rodent and termite proof Fire Barriers Hilti CFS A firestop

submittal shall be produced by manufacturer , in accordance

with approved passive fire protection method statement, for

technical approval. Firestop installation shall be done by certified

installers. Firestop Speciality Contractor needs to submitt work

completition certificate along with installation report through

manufacturer documentation Software for periodic inspection &

maintenance purpose.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

The gaps around combustible penetrants like plastic pipes or ducts

with insulation shall be sealed with an appropriate intumescent

technology Sealants. 2.00 ₹ 205,654.00 ₹ 411,308.00

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

13.4 NDSR Through Penetration on Floor (Medium to large size i.e. 4" gaps)

Providing Fire stop mortar system, with minimum 2 hours fire rating

when tested in accordance with UL 1479/ASTM-E 814 standards,

for horizontal openings in floors or slabs after passing service lines

like cables/cable bundles, cable trays etc. The mortar shall be a

light weight cementitious product and shall carry test certificate in

accordance with IEC 60068-2-57:1999-11 (Environmental Testing)

as per Part 2-57: Test for Vibration-Time-history method and

VERTEQII for seismic zone 4. The product shall be age tested as per

Dafstb and DIBT standards. The product shall carry test certificate

for mold resistance rating of 0 as determined by ASTM G21-96. The

product shall be age tested as per Dafstb and DIBT standards.

The system shall be UL listed & classified and product shall bear the

UL and FM approval logo on the packing. If none of UL test

certificate comply with actual application, an EJ document

prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be producted by

manufacturer. A firestop submittal shall be produced by

manufacturer , in accordance with approved passive fire

protection method statement, for technical approval.

Firestop installation shall be done by certified installers and in

accordance with manufacturer guidelines and UL system test

certificates or approved EJ document. Firestop Speciality

Contractor needs to submit work completition certificate along

with installation report through manufacturer documentation SQUARE

Software CFS DM for periodic inspection & maintenance purpose. METER

The gaps around inaccessible or complicated openings shall be

sealed with exapnding firestop foam.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Through Penetration on Wall - Under Panel Sealing (Medium to

large size i.e. 4" gaps)

Provide rodent and termite proof Fire Barrier system for 2 hours fire

rating when tested in accordance with ASTM E 814/UL 1479

standards. The Composite Sheet 3.81 mm thick, bonded with

organic/inorganic fire-resistive elastomeric #SS 304 (Stainless steel)

sheet. One side it should be bonded with 26 gauge #SS 304

(Stainless steel) sheet and the other side it should be reinforced

with hexagonal shaped #SS 304 (Stainless steel) wire mesh and

covered with aluminum foil for the penetrants and the big

opening. The small gaps left around the penetrants should be

closed with Intumescent sealant of approved make, or with Fire

rated Moldable Putty, which should be soft & moldable to any

shape, to give complete L Rating.

made of concrete, masonry, metal, gypsum partition, after

passing service lines like cables/cable bundles, cable trays etc.

The system shall be UL listed & classified and product shall bear the

UL & FM approval logo on the packing. If none of UL test

certificate comply with actual application, an EJ document

prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be producted by

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

A firestop submittal shall be produced by manufacturer , in

accordance with approved passive fire protection method

statement, for technical approval. Firestop installation shall be

done by Hilti Accredited Firestop Speciality Contractor (HAFSC)

or by certified installers gone through Hilti's FIT service and in

accordance with Hilti guidelines and UL system test certificates or

approved EJ document. Firestop Speciality Contractor needs to

submitt work completition certificate along with installation report

through manufacturer documentation Software for periodic

inspection & maintenance purpose.

This system is to seal all fire rated horizontal in Floor The gaps

along/around cables penetrants shall be sealed with intumescent

sealnt. In case of repenetration requirement, intumescent based

speed sleeve of appropriate size shall be used and shall be paid 10.00 ₹ 23,600.00 ₹ 236,000.00

under separate heads and as mentioned below.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Through Penetration on Wall for sealing inaccessible, complicated

or annular gaps openings

Provide expanding firestop foam Hilti CP 620, with minimum 2

hours fire rating when tested in accordance with UL 1479/ASTM-E

814, for horizontal openings in floors or slabs made of concrete/

masonry or Gypsum after passing service lines like cable trays or

cables/cable bundles. The expanding foam expands seven times

its volume to fill the cavity at the time of dispensing the material

and shall fully cure within two minutes after dispensing. The

product shall be age tested as per Dafstb and DIBT standards.

The product shall provide water tightness when tested for W rating

as per UL standards and shall carry test certificate for sound

insualtion of 50 db when tested in accordance with ASTM E 90.

The product shall carry test certificate for mold resistance rating of

0 as determined by ASTM G21-96 and shall have a VOC content

of approx. 1.3 g/l as per LEED 2009. The product shall be age

tested as per Dafstb and DIBT standards.The product shall be

tested in accordance with IEC 60068-2-57:1999-11 (Environmental

Testing) as per Part 2-57: Test for Vibration-Time-history method and

VERTEQII for seismic zone 4.

The system shall be UL listed & classified and product shall bear the

UL and FM approval logo on the packing. The product shall be

age tested as per Dafstb and DIBT standards. If none of UL test

certificate comply with actual application, an EJ document

prepared by a qualified personnel and based on nearest third

party tested & approved systems like UL test certificates & in

accordance with IFC guidelines shall be producted by

manufacturer. A firestop submittal shall be produced by

manufacturer , in accordance with approved passive fire

protection method statement, for technical approval. Firestop

installation shall be done by certified installers and UL system test

certificates or approved EJ document.

Firestop Speciality Contractor needs to submitt work completition

certificate along with installation report through manufacturer

documentation Software for periodic inspection & maintenance SQUARE

purpose. METER

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Joints (Top of Wall) between vertical concrete/masonary wall to

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Provide sprayable Fire-rated joint spray in gaps between vertical

concrete/masonary wall and deck slab to provide minimum 2

hours of fire rating when tested as per UL 2079 standard . The

product shall have upto 50% Movement Capability and Sound

Insulation of 55db as per ASTME-90. The product shall have passed

the 500 cycles requirement as specified by ASTM E 1399 class II.

The product shall carry carry test certificate for mold resistance

rating of 0 as determined by ASTM G21-96 and shall have a VOC

content of approx. 60 g/l as per LEED 2009.

The product shall carry test certificate as per ASTM E 1399 class II

for movement capability. The system shall be UL listed & Classified

and product shall bear the UL and FM approval logo on the

packing. If none of UL test certificate comply with actual

application, an EJ document prepared by a qualified personnel

and based on nearest third party tested & approved systems like

UL test certificates & in accordance with IFC guidelines shall be

producted by manufacturer.

A firestop submittal shall be produced by manufacturer , in

accordance with approved passive fire protection method

statement, for technical approval. Firestop installation shall be

done by certified installers and in accordance with manufacturer

guidelines and UL system test certificates or approved EJ

Firestop Speciality Contractor needs to submitt work completition

certificate along with installation report through manufacturer

documentation Software for periodic inspection & maintenance RUNNING

purpose. METER

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

XIII RECREATION EQUIPMENTS

Supply of Gym / Recreation Equipments as per selection by client

/ Engineer in charge as follows :

Supply and installation of tread mill as per following specifications :

Dimensions (LxWxH) - 1760 x 785 x 1260 mm (69,3 x 30,9 x 49,6 in),

Equipment weight - 92 kg (202,8 lb), Running Surface (Length x

Width) - 1430 x 500 mm (56,3 x 19,7 in), Running surface height

above ground - 170 mm (6.7 in), Motor power continuous duty -

220 V – 2.5 HP / 110 V – 3.0 HP, Energy Consumption in-standby -

Less than 0.5 W, Power requirement - 230 Vac ±10% 50/60 Hz, Max

user weight - 140 kg (308.6 lbs), Min Speed - 0.8 km/h (0.5 mph),

Max speed - 20 km/h (12.4 mph), Incline (Min)- 0%, Incline (Max) -

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

Supply of corded electric exercise cycle with 22” HD Touchscreen

& speaker system. Material Type: Alloy Steel, Made from premium

grade materials which are high-quality steel, plastic and rubber for

long lasting high performance. 1 - year warranty against

manufacturing defects.

Maximum Height: 76 Inch. Resistance Mechanism: Magnetic,

Number of Resistance Levels: 10, Drive System: Belt Drive. The

cycle to be equipped with a 22" HD touchscreen display for an

immersive experience for trainer-led workouts, virtual rides and

more. Full set of instruction manual. The cycle to be equipped with

a 16.5 lbs flywheel to offer a great momentum for exercise. Make :

Flexnest, Cultsport.

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

REF NO. PARTICULARS UNIT QUANTITY RATE AMOUNT

Supply of Carrom table as per following specifications :

MATERIAL- The Carrom board is made of best quality plywood

board for the playing surface and seasoned hardwood borders

imparting a superior look and feel of board. The carrom board is

beautifully crafted out of plywood and hand painted, making it a

smooth playing surface. It contains four wooden borders

measuring 1.5” wide, for superb rebound play.

PRODUCT DETAILS– This classic strike and pocket game measures

c) NDSR 32”x32”, Playing surface- 29”x29” and include 10 black wooden EACH 2.00 ₹ 19,700.00 ₹ 39,400.00

coins, 10 beige wooden coins, 2 red queen coins and one striker

as well as carom powder. All four corners of this carom board to

contain wooden pockets with felt to catch the discs during game

play. The pockets to swivel so that the pieces can be easily

retrieved and provide additional support and stability for the

All complete as per specifications, drawings, design intent and as

directed by Engineer in charge / OIL.

GRAND TOTAL OF CIVIL & INTERIOR WORKS ₹ 33,028,414.00

GRAND TOTAL OF CIVIL & INTERIOR WORKS ₹ 33,028,414.00

Sr. No. Description of Goods Unit Qty Amount

1 RECEPTION AREA

a NDSR Reception Table :- W3000xD750mmxH1185mm With Pedestal Each 1 14850 Rs 14,850

Providing and supplying Reception Desk . It has 25mm thick Worktop and Gable

Ends made of pre Laminated Particle Board sealed with PVC Edge Banding. Front

and Modesty Panel are 18mm thick Pre Laminated ParticleBoard Sealed with PVC

EdgeBanding.. The Counter Top is 25 mm Thick Postformed ParticleBoard. Unit has

One Pull out drawer with Lock and Handle.Laminate pedestal unit having Dimension

400mm W x 450mm D x 621Ht and shall consist of One pencil tray, 2 drawers and one

filing box. It is made of 18mm prelaminated particle board . It shall be provided with

2 lockable and two free twin wheeled castors. The pedestals shall have central

locking mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide

for 1 Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be

fitted inside the first drawer. It should freely slide in horizontal direction. The pencil

tray shall have necessary compartments (Miniumum 3 compartments) for keeping

stationary items. Pedestal is without handle and shall have side champhered edges

for operating.Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The

International EPD System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5

b NDSR Back Storage :-W3300xD450xH750mm Each 1 41745 Rs 41,745

Providing and placing approved make Prelaminated Particle Board storage with

openable doors made up of 18mm thick prelaminated particle board with PVC

edge banding and locking arrangement.Storage body is made of 18mm thick pre

laminated partical Board conforming to IS : 12823 Interior Grade.The back of the unit

is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth

.Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International

EPD System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

c NDSR Security Table :- W1200xD600 x H750mm Each 1 21250 Rs 21,250

Providing and Supplying Study Table . Worktop is made of 25mmthick PLPB of Grade

II, Type II conforming to IS:12823: 1990 and having 2mm thick pvc edge lipping,

Understructure is made of 18mm thick PLPB of Grade II, Type II conforming to

IS:12823: 1990 and having 2mm thick pvc edge lipping. One no Drawer is buil into

the table. Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The

International EPD System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5

c NDSR Chair Each 3 15610 Rs 46,830

Providing and placing OF chair.

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height PP Adjustable

Seat Depth Adjustment

Base Type - 5-Star in PP Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment .Warranty 5 years .

d NDSR Round Side Table :- D600mm Each 3 19360 Rs 58,080

Sr. No. Description of Goods Unit Qty Amount

Providing and placing round centre table with 600mm dia . Table top is made of 25

mm thick prelaminated particle board .All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding . Understructure is made of ss with 475mm dia . Table height is 400mm .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

e NDSR 1 Seater Sofa Each 12 33880 Rs 406,560

f NDSR 2 Seater Sofa Each 1 45980 Rs 45,980

Providing & Fixing of sofa . The inside frame is made of seasoned wood and has

antitermite treatment. The seat and back are made of foam and is finished in

leatherite upholestry. The Frame base has Webbing for Supporting the Cushions. The

Complete Sofa Body has Polyurethane Foam in desired shape. The Sofa is supported

on Metal Chrome Plated Legs. Leatherite colour and type as per directions of

Engineer in Charge.

2 HOD /VISTING DIR.

Cabin Table :- W2400xD1050 with side Table of size W1200xD450xH750mm With

a NDSR Each 2 102850 Rs 205,700

Providing and Placing Cabin Table. Table Dimensions as mentioned below. Main

Table and Side Table made of 30 mm thick Pre Laminated Particle Board with

matching 2 mm thick edge Banding. Modesty panels are in 18mm thk Postlaminated

finish. The Table tops should have metal inserts on underside for modularity. The

screw used should be blunt headed and not sharp headed for metal to metal

coupling . Table supports are combination of Metal poles and Gable ends. Access

Flap with Cable tray and switch mounting plate is provided on side table for wire

management. Back storage unit is a Hinged Door unit . Back Unit is made of 0

Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles

220mm L are provided in storages. Side table has a 3 drawer laminate pedestal unit

with castors and pedestal unit is of size 400mm L x 450mm D x 680mm Ht made up of

18mm thk. Prelaminated Particle Board Caracass having central locking system . 2

Drawers are with roller slide mechanism and Filing Unit is with Ball bearing slides.

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

b NDSR Back Storage :-W3300xD450xH750mm Each 1 41745 Rs 41,745

c NDSR Back Storage :-W2700xD450xH750mm Each 1 35816 Rs 35,816

Providing and placing Prelaminated Particle Board storage with openable doors of

made up of 18mm thick prelaminated particle board with PVC edge banding and

locking arrangement.Storage body is made of 18mm thick pre laminated partical

Board conforming to IS : 12823 Interior Grade.The back of the unit is made from

18mm prelaminated board. All the exposed edges are with 2mm PVC egde

Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth

.Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International

EPD System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

e NDSR Main Chair Each 2 50820 Rs 101,640

Providing and placing OF main chair.

Back Height - Leatherette with Headrest

Back Finish - Leatherette with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Leatherette

Seat Height Adjustment - Pneumatic

Mechanism - Weight Activated Mechanism with seat depth adjustment

Armrests Type - 3D Height-Width-Depth Adjustable

Armpads Type - Polyurethane

Base Type - 5-Star in Black nylon

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment . WARRANTY: 10 Years from the date of

f NDSR Visitor Chair Each 12 47190 Rs 566,280

Sr. No. Description of Goods Unit Qty Amount

Back Height - Medium Back

Back Finish - Leatherette with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Leatherette

Seat Height Adjustment - Pneumatic

Mechanism - Weight Activated with seat depth adjustment

Armrests Type - 3D Height-Width-Depth Adjustable

Armpads Type - Black Polyurethane

Base Type - 5-Star in Black nylon

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment . WARRANTY: 10 Years from the date of

g NDSR 1 Seater Sofa Each 3 33880 Rs 101,640

h NDSR 2 Seater Sofa Each 2 45980 Rs 91,960

Providing & Fixing of sofa . The inside frame is made of seasoned wood and has

antitermite treatment. The seat and back are made of foam and is finished in

leatherite upholestry. The Frame base has Webbing for Supporting the Cushions. The

Complete Sofa Body has Polyurethane Foam in desired shape. The Sofa is supported

on Metal Chrome Plated Legs. Leatherite colour and type as per directions of

Engineer in Charge.

i NDSR Round Side Table :- D600mm Each 4 19360 Rs 77,440

Providing and placing round centre table with 600mm dia . Table top is made of 25

mm thick prelaminated particle board .All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding . Understructure is made of ss with 475mm dia . Table height is 400mm .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

j NDSR Center Table :- W900xD600mm Each 2 21780 Rs 43,560

Supply and placing centre table in position with sizes

as mentioned above with top made of 10mm thick glass top supported on SS Studs

on understructure of Prelaminated Particle Board. The Table shall have another shelf

at lower level The work shall be carried out as per the instructions received from

engineer-incharge.Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA ,

The International EPD System (IES) , BIFMA Complaint member , BIFMA GOLD .

Warranty 5 years

k NDSR Meeting Table:-W1050xD1050xH750mm Each 1 30250 Rs 30,250

Providing & Fixing of MEETING Table . The Worktop shall be made of 25mm THK

Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of

0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine

pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross

Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in

powder coated finish of 50 microns thickness . The above furniture should be as per

specification and sample approved by client.Certifications - ISO 9001 - 2015 ,14001-

2015 ,45001-2018 , AIOTA , The International EPD System (IES) , BIFMA Complaint

member , BIFMA GOLD . Warranty 5 years

1 Exec. / UNION /SECTION HEAD

a NDSR Cabin Table :- W1800xD750 with side table of size W900xD450xH750mm With Pedestal Each 8 66550 Rs 532,400

b NDSR Cabin Table :- W1650xD750 with side Table of size W900xD450xH750mm With pedestal Each 12 70180 Rs 842,160

Cabin Table :- W1500xD750 with side Combo ( Combination of hinged door and 3

c NDSR Each 1 66550 Rs 66,550

Drawer pedestal) of size W900xD450xH750mm

Sr. No. Description of Goods Unit Qty Amount

Providing & Supplying Cabin Table with dimensions as mentioned below . For main

table and side table Worktop is made of 25mm thick Prelaminated particle board

with 2 mm thick PVC Lipping on the edges. The worktop is supported on inclined

Metal Legs 50mm x 50mm , powder coated understructure with Laminate / metal

Modesty panel. The Metal legs are connected by Metal Beams for stability and . The

Table tops should have metal inserts on underside for modularity. The screw used

should be blunt headed and not sharp headed for metal to metal coupling . Colour

as per direction of Engineer in Charge. SideTable has 3 Drawer Laminate Pedestal

with Castors 400mm W x 450 D x 680mm Height. the unit is made from 18mm

prelaminated board. All the exposed edges are with 2mm PVC egde Imported

banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The

top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The

units are assembled by knock down fittings such as Minifix & Dowels. All the

hardware and Hinges are from Hettich/Ebco. Certifications - ISO 9001 - 2015 ,14001-

2015 ,45001-2018 , AIOTA , The International EPD System (IES) , BIFMA Complaint

member , BIFMA GOLD . Warranty 5 years

e NDSR Back Storage :-W2700xD450mm x 750mm Ht Each 12 35816 Rs 429,792

f NDSR Back Storage :- W3300xD450mm x 750mm Ht Each 8 41745 Rs 333,960

Providing and placing Prelaminated Particle Board storage with openable doors of

made up of 18mm thick prelaminated particle board with PVC edge banding and

locking arrangement.Storage body is made of 18mm thick pre laminated partical

Board conforming to IS : 12823 Interior Grade.The back of the unit is made from

18mm prelaminated board. All the exposed edges are with 2mm PVC egde

Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

g NDSR Main Chair Each 21 22022 Rs 462,462

Providing and placing OF chair.

Back Height - High Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height Adjustable

Armpads Type - Polyurethane

Base Type - 5-Star in Nylon Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment . Warranty : 5 years from the date of

h NDSR Visitor chair Each 59 17303 Rs 1,020,877

Providing and placing OF chair.

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height Adjustable

Armpads Type - Polyurethane

Base Type - 5-Star in Nylon Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment . Warranty : 5 years from the date of

i NDSR Stool Each 1 7865 Rs 7,865

Sr. No. Description of Goods Unit Qty Amount

Providing and Supplying Lab Stool with Seat Dia minimum 30 cm. The seat should be

made up of 12mm thick hot pressed plywood upholstered with fabric / Leatherite

and moulded polyurethane foam. Chair should be on a 4 legged Metal Pipe frame

assembly with Height adhustability for seat and is duly powder caoted and provided

with gliders as per manufacturer's specifications, drawings & direction of Engineer in

charge. The above furniture should be as per specification and sample approved

j NDSR 1 Seater Sofa Each 16 33880 Rs 542,080

Providing & Fixing of sofa . The inside frame is made of seasoned wood and has

antitermite treatment. The seat and back are made of foam and is finished in

leatherite upholestry. The Frame base has Webbing for Supporting the Cushions. The

Complete Sofa Body has Polyurethane Foam in desired shape. The Sofa is supported

on Metal Chrome Plated Legs. Leatherite colour and type as per directions of

Engineer in Charge.

k NDSR Round Side Table :- D600mm Each 8 19360 Rs 154,880

Providing and placing round centre table with 600mm dia . Table top is made of 25

mm thick prelaminated particle board .All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding . Understructure is made of ss with 475mm dia . Table height is 400mm .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

m NDSR Storage :-W1200xD450mm x 71200mm Ht Each 65 25555 Rs 1,661,075

Providing and placing Prelaminated Particle Board storage with openable doors of

1200mm(ht), made up of 18mm thick prelaminated particle board with PVC edge

banding and locking arrangement.Storage body is made of 18mm thick pre

laminated partical Board conforming to IS : 12823 Interior Grade.The back of the unit

is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

3 Meeting Room

a NDSR Meeting table :-W4800xD1350xH750mm Each 3 102850 Rs 308,550

Providing & Fixing of MEETING Table . The Worktop shall be made of 25mm THK

Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of

0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine

pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross

Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in

powder coated finish of 50 microns thickness . The above furniture should be as per

specification and sample approved by client .Certifications - ISO 9001 - 2015 ,14001-

2015 ,45001-2018 , AIOTA , The International EPD System (IES) , BIFMA Complaint

member , BIFMA GOLD . Warranty 5 years

b NDSR Meeting Chair Each 39 15610 Rs 608,790

Providing and placing OF chair.

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height PP Adjustable

Seat Depth Adjustment

Base Type - 5-Star in PP Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment .Warranty 5 years .

c NDSR Back Storage :- W3300xD450mm x 750mm Ht Each 3 41745 Rs 125,235

Sr. No. Description of Goods Unit Qty Amount

Providing and placing Prelaminated Particle Board storage with openable doors of

made up of 18mm thick prelaminated particle board with PVC edge banding and

locking arrangement.Storage body is made of 18mm thick pre laminated partical

Board conforming to IS : 12823 Interior Grade.The back of the unit is made from

18mm prelaminated board. All the exposed edges are with 2mm PVC egde

Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

a NDSR L Shape Workstation :L1500xW1500xD600xH1200mm Each 90 54450 Rs 4,900,500

Providing and placing Curvilinear Workstation . Frame is 50 mm thick and made of

vertical Aluminium Extrusions of 1.9 mm to 2mm thickness. Horizontal Member of

frame are CRCA 0.8mm Thick. The System is complete hollow system with space for

wire reticulation . All the frames will be duly powder coated . All the frames are

fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10

leveling bolts.board.Raceway :-The raceway cover are sliding type and are

integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel &

powder coated.The electrical raceway can be provided below worktop or above

worktop.The partition has integrated raceway provided one at skirting level thereby

making 2 Raceways. Corner and End Post are made of 1.6mm Thick Aluminium

Extrusion , Vertical Trims are made of 1.3mm Thick Aluminium and Horizontal Trims are

made of 1.1mm thick Aluminium and are duly powder coated. The free space

available within raceway accommodates power, data and communication cables.

The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric

Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered

with Fabric of choice. Laminate Tile: Made out of 5mm - 6 mm thick Pre-laminated

Medium Density Fiber Board (MDF). Bottom Row of Steel Tile: Constructed out of

0.7mm CRCA sheet and finished in epoxy powder coating. Can be given with plain /

perforations / embossed finishes. Magnetic tile: Constructed out of 0.7mm

Galvanized sheet and covered with fabric of choice. Pin up tile is made of 4.5mm

Bubble Guard Sheet + Fabric wrapped. Whiteboard marker tiles: Made out of 4mm

MDF with 1mm glossy highly wear resistant face laminate . Total thickness is

5mm.Table tops and Gable ends are of 25mm thk Pre-laminated particleboards

conforming to IS : 12823 Interior Grade. All Worktops to have Metal Insets for fixing

screws. Powder coated M.S. brackets having 2mm thickness fixed to the partition

b NDSR Pedestal :-W400xD450xH630mm Each 90 8985 Rs 808,650

Providing and placing OF Laminate pedestal unit having Dimension 400mm W x

450mm D x 621Ht and shall consist of One pencil tray, 2 drawers and one filing box. It

is made of 18mm prelaminated particle board . It shall be provided with 2 lockable

and two free twin wheeled castors. The pedestals shall have central locking

mechanism. It has roller slide mechanism for 2 Drawers and Ball bearing slide for 1

Filng Unit.The pencil tray shall be made of 2mm moulded HIPS and shall be fitted

inside the first drawer. It should freely slide in horizontal direction. The pencil tray

shall have necessary compartments (Miniumum 3 compartments) for keeping

stationary items. Pedestal is without handle and shall have side champhered edges

for operating. Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The

International EPD System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5

d NDSR Storage :-W1200xD450mm x 1200 mm Ht Each 34 25555 Rs 868,870

e NDSR Storage :-W900xD450mm x 1200mm Ht Each 15 17787 Rs 266,805

f NDSR Storage :-W1500xD450mm x 1200mm Ht Each 17 30492 Rs 518,364

Sr. No. Description of Goods Unit Qty Amount

Providing and placing Prelaminated Particle Board storage with openable doors of

1200mm(ht), made up of 18mm thick prelaminated particle board with PVC edge

banding and locking arrangement.Storage body is made of 18mm thick pre

laminated partical Board conforming to IS : 12823 Interior Grade.The back of the unit

is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC

egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge

banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge

banding. Storage has adjustable shelves inside and cam lock, tower bolt and

locking strips.The units are assembled by knock down fittings such as Minifix &

Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has Brushed SS

finish handles and lock . Prelam storage unit of 1200mm ht and 450mm depth .

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD . Warranty 5 years

g NDSR Chair Each 90 15609 Rs 1,404,810

Providing and placing OF chair.

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height PP Adjustable

Seat Depth Adjustment

Base Type - 5-Star in PP Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment .Warranty 5 years .

6 Compactor Room

a NDSR Storage :- W900xD450xH2150mm Each 40 54450 Rs 2,178,000

Providing & Supplying Compactor of approximately 2150mm height (Ht).The overall

height of the standard module is 2150 mm from the bottom of the under carriage to

the top of the module. These modules are fabricated in the factory with knock

down construction covered from all the sides. The sheet used is CRCA conforming to

IS:513 Grade D with thickness 0.8-1mm for the vertical back, side walls, top cover and

horizontal shelves of bodies. Bodies are fixed/movable are bolted to undercarriage

made up of 2-3mm thk HR Steel sheet which rolls onto channels/rail of 1.2-2mm thk

HR steel & 25mm square bright bar which are embedded to the levelled ground. The

Body has 4 Shelves.

The sides/shelves shall be made from steel sheets conforming to relevant codes. The

construction of the units shall be such that protection against dust by suitable

overlapping of sheets and adequate pressing of joint. The allowable dimensional

tolerance for the overall size of the body is 2mm. The bodies should be complete

knock down type and UDL each shelf should be 40kg . No welding/metal working is

allowed on site, Bodies are fixed/movable are bolted to undercarriage is allowed on

7 Recreation Area

a NDSR Table :- W1200xD1200mm Each 4 21780 Rs 87,120

b NDSR Table :- W2250 x D900mm Each 1 30250 Rs 30,250

Providing & Fixing of MEETING Table . The Worktop shall be made of 25mm THK

Prelamparticle Board of Grade II , Type-II as per IS:12823 and backing laminate of

0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine

pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross

Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in

powder coated finish of 50 microns thickness . The above furniture should be as per

specification and sample approved by client.Certifications - ISO 9001 - 2015 ,14001-

2015 ,45001-2018 , AIOTA , The International EPD System (IES) , BIFMA Complaint

member , BIFMA GOLD . Warranty 5 years

c NDSR Chair Each 22 15609 Rs 343,398

Sr. No. Description of Goods Unit Qty Amount

Providing and placing OF chair.

Back Height - Medium Back

Back Finish - Mesh with adjustable lumbar support

Back Frame - Black Color

Seat Finish - Fabric

Seat Height Adjustment - Pneumatic

Mechanism - Synchronized Tilt

Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable

Armrests Type - 1D Height PP Adjustable

Seat Depth Adjustment

Base Type - 5-Star in PP Base

Certifications - ISO 9001 - 2015 ,14001- 2015 ,45001-2018 , AIOTA , The International EPD

System (IES) , BIFMA Complaint member , BIFMA GOLD , Green Guard product

specific certificate issued by UL Environment .Warranty 5 years .

a NDSR Locker Each 18 33880 Rs 609,840

Providing and Supplying 2 Door Steel Personal Locker unit. The Complete unit is

made of 0.6mm thick CRCA Sheet duly powder coated for 40-50 micron thickness.

The Unit size is 1800mm Ht x 375mm W x 450mm D. The Door has individual locks for

both doors. The Locker has Perforations in door. The door has Recessed Handle

made of Moulded Engineering Plastic.

Providing and Supplying of baby crib with mosquito net and adjustable stand, easily

convertible into study table, daybed, rocker and junior bed. Wheels for easy mobility

9 NDSR and feature lock which helps to still the position of cot when needed. Featuring Each 2 45000 Rs 90,000

large storage space underneath the cot provides convenient storage, it also has a 4-

level mattress support.

Providing and Supplying Hospital Examination Table with cabinet of approx. Size:

1850L x 600W x 800H. Adjustable.backrest , Two section foam padded top with

waterproof rexene. One single foot step.

Three drawers & cabinets, Tray for BP Appratus, SS Frame.

TOTAL Rs 21,164,609

ELECTRICAL & LV WORKS

SUB HEAD DESCRIPTION AMOUNT

ELECTRICAL SYSTEM

A SUB HEAD-A: POINT WIRING, MCB & DB ₹ 3,807,371.00 ₹ 174,116.67

B SUB HEAD-B: DATA, TELEPHONE & T.V SYSTEM ₹ 1,688,716.00 ₹ 5,798,747.00

C SUB HEAD C : LUMINAIRE & FIXTURES ₹ 155,530.00 ₹ 3,889,912.67

D SUB HEAD D : CABLES AND CABLES TRAY ₹ 370,494.00 ₹ 1,051,395.00

E SUB HEAD E : MAIN DISTRIBUTION BOARDS ₹ 0.00 ₹ 975,620.00

F SUB HEAD F : EARTHING ₹ 221,421.00 ₹ 124,270.00

G SUB HEAD G : FIRE ALAARM & P.A SYSTEM ₹ 279,350.00 ₹ 2,995,256.00

H SUB HEAD H : CLOSE CIRCUIT TELEVISION - IP Based & SURVEILLANCE ₹ 0.00 ₹ 463,011.25

I SUB HEAD I : FLUOROKETONE (FK-5-1-12) BASED FIRE SUPPRESSION ₹ 0.00 ₹ 1,457,739.33

J SUB HEAD J : UPS SYSTEM ₹ 0.00 ₹ 1,985,583.33

K SUB HEAD K : ACCESS CONTROL SYSTEM ₹ 0.00 ₹ 897,106.67

Add GST factor @1.0633 on DSR items

Add CPWD circular dated 08.08.2024 for labour Cess on DSR

Add CPWD cost index @1.10 on DSR items

BOQ ELECTRICAL & LV WORKS

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

SUB HEAD-A: POINT WIRING, MCB & DB

1.0 DSR-2022 -1.10 Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm.FRLS PVC insulated copper conductor single core cable etc as required.

2.0 DSR-2022 -1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single Meter 2750 334.00 918500

core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

3.0 DSR-2022 -1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single Meter 1600 537.00 859200

core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

4.0 DSR-2022 -1.14 Wiring for circuit / submain wiring alongwith earh wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required

a) DSR-2022 -1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 375 233.00 87375

b) DSR-2022 -1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 1450 275.00 398750

c) DSR-2022 -1.14.7 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire Meter 675 410.00 276750

5.0 DSR-2022 -1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or Each 60 477.00 28620

in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

modular switch, connection, painting etc. as required. (For light plugs to be used in non

residential buildings).

6.0 DSR-2022 -1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or Each 170 586.00 99620

in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and

15/16 amps modular switch, connection, painting etc. as required.

7.0 DSR-2022 -1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm

FRLS PVC insulated copper conductor single core cable etc. as required

8.0 DSR-2022 -1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or Each 270 676.00 182520

in recess, including providing and fixing 2nos.3 pin 5/6 amps modular socket outlet and

2nos. 5/6 amps modular switch, connection, etc. as required. (For light plugs to be used in

non residential buildings).

NDSR-52 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or Each 70 970.00 67900

in recess, including providing and fixing 3nos.3 pin 5/6 amps modular socket outlet and

2nos. 5/6 amps modular switch, connection, etc. as required. (For light plugs to be used in

non residential buildings).

9.0 DSR-2022 -1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or Each 8 727 5816

in recess, including providing and fixing 25 amps modular socket outlet and 25 amps

modular SP MCB "C" curve including , connection, painting etc. as required.

10.0 DSR-2022 -2.3 Supplying and fixing following way,single pole and neutral, sheet steel, MCB distribution

board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

a) DSR-2022 -2.3.4 16 way , Double door Each 2 3141.00 6282

11.0 DSR-2022 -2.4 Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar,

neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

c) NDSR-1 12 way (4 + 36), Double door Each 9 8533.33 76800

12.0 DSR-2022 -2.10 Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker

suitable for lighting and other loads of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

a) DSR-2022 -2.10.1 Single Pole Each 484 256.00 123904

13.0 DSR-2022 -2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as Each 17 13.00 221

14.0 DSR-2022 -2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

15.0 DSR-2022 -2.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

16.0 DSR-2022 -2.18 Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and Each 2 1621.00 3242

earth, metal enclosed plug top along with 20 amps 'C' curve, SP, MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as required.

17.0 NDSR-2 SITC of Distribution boards with required range of SPN / TPN MCCB & MCB's. IP54 Protection Each 1 29416.67 29417

Indoor applications Modular and MCCB provision for Incomer Surface Mounted Enclosure.

Anti Wall Insertion Marking –Should Ensures perfect fit during flush mounting Should have

Removable Chassis for Ease of installation & Easy MCB mounting Shall have standard

accessories: wire sets, bus bars, etc – Interconnecting wireset with special designed busbars

for electrical safety Reusable Cable Management kit – For neat and clutter free wiring / re-

wiring Shall be Tested for IK09 Impact resistance – Shall have Good strength to weight ratio.

a) 12 Way SPN LIGHTING CONTROL DB.

Comprising of Following:

Incoming:(UPS POWER SUPPLY)

One (1) No. 6 A DP MCB

Provision for Control the Dali Module.

2 Nos. 2 A SP MCB

Separate for each outgoing

Earthing Terminals:

Earthing terminals suitable for 2 Nos. outgoing.

12 Way SPN LIGHTING CONTROL DB as per drawing and as described above.

TOTAL SUB HEAD A: POINT WIRING, MCB & DB 3807371 174117

SUB HEAD-B: DATA, TELEPHONE & T.V SYSTEM

19.0 NDSR-3 Supply and fixing of the following Telephone Tag Block made out of M.S sheets of 18 SWG

thickness properly welded complete with all accessories such as Tag block, connector ,

mounting strips, tapped holes, fixing bolts, approved shad of paint after primer as per

specifications.

a) 200 Pair (Provision for connection upto 300 pair) Each 1 21150.00 21150

TELEPHONE CABLES

20.0 NDSR-4 Supplying, wiring and connecting following pairs 0.6 mm dia twin core tinned copper

conductor PVC insulated and sheathed Unarmoured telephone cables in existing pipes.

a) 50 pair cable Meter 120 400.00 48000

b) 10 pair cable Meter 100 150.00 15000

21.0 DSR 2022 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper

1.18.3 conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit

22.0 DSR 2022 Supplying and fixing following modular switch/ socket on the existing modular plate &

1.24.6 switch box including connections but excluding modular plate etc. as required.

a) Telephone socket outlet Each 150 148.00 22200.00 22200

23.0 NDSR-5 Supply, Installation, Testing & Commissioning of Category 6 RJ45 Unshielded Modular Jack, Each 300 693.33 207999

Keystone information outlet (I/O) in accordance with ANSI/TIA 568.2-D, IEC 60603-7-4 2nd

Edition, ISO/IEC 11801, ROHS Compliant. The I/O should have minimum 750 mating cycle

and 200 insertion cycle and ETL 04-Connector Channel Verified with MTPL, tested @ 350Mhz

for Data, Voice, & Wi-Fi at Field End complete etc as required.

24.0 DSR 2022 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed

1.53.1 Steel/ PVC conduit as required. (Data / Telephone - 9800 Mtr., / CCTV-960,BGM System - 100

Mtr.,Access Control System- 350Mtr.).

a) 1 run of cable Meter 5500 57.00 313500.00

25.0 NDSR-6 Supply, Installation, Testing & Commissioning of 24 Port Unshielded Patch Panel, Loaded with Meter 15 18723.00 280845

Category 6 RJ45 Unshielded Modular Jack, Keystone information outlet (I/O) in

accordance with ANSI/TIA 568.2-D, IEC 60603-7-4 2nd Edition, ISO/IEC 11801, ROHS

Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and ETL

04-Connector Channel Verified, 1U height, Black with integrated cable support bar, clear

label marks and earthing plug for UTP cable termination at rack end complete etc as

required for CAT6 cable termination at rack end.

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

26.0 NDSR-7 Supply, Installation, Testing & Commissioning of Category 6 RJ45 Unshielded LSZH Patch Nos. 300 435.00 130500

Cord as per ANSI/TIA/EIA 568.2-D and ETL 04-Connector Channel Verified, ROHS Compliant,

24AWG Patch Cord, Diameter 5.8 ± 0.03 mm, 1 Meter, Operating Temperature -10 Deg C to

+60 Deg C. patch cord 1 Mtr for Data at Rack Side for Switch to Jack Panel Connectivity

complete etc as required.

27.0 NDSR-8 Supply, Installation, Testing & Commissioning of Category 6 RJ45 Unshielded LSZH Patch Nos. 300 490.00 147000

Cord as per ANSI/TIA/EIA 568.2-D and ETL 04-Connector Channel Verified, ROHS Compliant,

24AWG Patch Cord, Diameter 5.8 ± 0.03mm, 2 Meter, Operating Temperature -10 Deg C. to

+60 Deg C. patch cord 2 Mtr for Data at User Side for I/O to Computer Connectivity

complete etc as required.

29.0 DSR-2022 Supplying and fixing following size/ modules, GI box along with modular base & cover plate

1.27.1 for modular switches in recess etc as required.

a) 1 or 2 Module (75mm x 75mm) Each 450 298.00 134100

23.0 NDSR-9 Supply, Installation, Testing & Commissioning of armoured 06 Core Singlemode (OS2) 9/125 Meter 350 198.00 69300

Fiber Cable, ITU G.652.D, G.657A1, Outdoor Corrugated ECCS Armor, HDPE (UV) Sheathing,

Theoxtropic gel filled OFC cable with 2 Nos steel wire embedded inside sheathing as

strengthening member for switch connectivity. Cable should be ROHS compliant and as per

ANSI/TIA-568.3-D, Telcordia GR-20, IEC 60794-2/60794-3-10, ISO/IEC 11801, ISO/IEC 24702

complete on surface / recess / in existing pipe / open duct complete etc as required.

NDSR-10 Supply, Installation, Testing & Commissioning of 12F 1U x 19” LIU Loaded with Singlemode Nos. 3 28000.00 84000

OS2 LC Adapters & LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1,

Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM,

Repeatability: <= 0.2DB 1000 times mating cycles along with Splice tray, cable holder and 4

nos of cable entry exist point with Rubber grommets along with the LIU, SPCC Powder

Coated, 2-Cut Out type, 1U, RoHS Complied, Meets ANSI/TIA 568.3-D. etc complete as

NDSR-11 Supply, Installation, Testing & Commissioning of 24F 1U x 19” LIU Loaded with Singlemode Nos. 2 34000.00 68000

OS2 LC Adapters & LC Type LSZH Pigtails should meet IEC 61034-1 ,IEC-60332-1, IEC-60754-1,

Insertion loss <= 0.35 dB, Return Loss >= 50, Attenuation: 1310/1550 : 0.3/0.2 dB/KM,

Repeatability: <= 0.2DB 1000 times mating cycles along with Splice tray, cable holder and 4

nos of cable entry exist point with Rubber grommets along with the LIU, SPCC Powder

Coated, 2-Cut Out type, 1U, RoHS Complied, Meets ANSI/TIA 568.3-D. etc complete as

NDSR-12 Supply, Installation, Testing & Commissioning of LC-LC 9/125μm OS2 Singlemode Round Nos. 30 3126.00 93780

Cord duplex, LSZH fiber patch cord having a protective layer of metal braiding for LIU to

switch connectivity. Patch Cord should have Blue Jacket with 1000-time mating cycle

complete etc as required.

24.0 DSR-2022 -1.24 Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

a) DSR-2022 -1.24.7 T.V antenna socket outlet Each 4 148.00 592

25.0 NDSR-13 Supply, erection, testing and commissioning of following tap off with boxes for CATV system.

a) Four way (T-4) Each 2 452.33 905

26.0 NDSR-14 Supply, erection, testing and commissioning of spliter with boxes.

a) Four way (S 4) Nos. 1 641.67 642

27.0 NDSR-15 Supply, laying, connecting and commissioning of RG-11 co-axial cable of CATV as per Meter 80 69.00 5520

specification in existing MS/PVC conduit

28.0 NDSR-16 Supply, laying, connecting and commissioning of RG-6 co-axial cable of CATV as per Meter 210 48.00 10080

specification in existing MS/PVCconduit.

29.0 DSR-2022 -1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate

for modular switches in recess etc as required.

30.0 DSR-2022 -1.28 Supplying and fixing following modular base & cover plate on existing modular metal boxes

etc as required.

31.0 DSR-2022 -1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/ recess including cutting the wall and making good the same in case of

recessed conduit as required.(for Data / Telephone, CCTV , T.V System , Access Control

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

32.0 NDSR-17 Supply, Installation, Testing and Commissioning of Firewall with 22 x GE RJ45 ports (including Each 0 1835600.00 0

2 x WAN ports, 1 x DMZ port, 1 x Mgmt port, 2 x HA ports, 16 x switch ports with 4 SFP port

shared media), 4 SFP ports, 2x 10G SFP+ Links, dual power supplies redundancy with 1 yrs

Unified Threat Protection (UTP) (IPS, Advanced Malware Protection, Application Control, URL,

DNS & Video Filtering, Antispam Service)

NDSR-18 Supply, Installation, Testing & Commissioning of Core Switch with 26× 10G SFP+ ports with 6× Each 1 1946040.00 1946040

25G SFP28 slots.The LAN Switch should have 2 x USB 2.0 Ports, 1 x RJ 45 Ports MGMT Port , 1x

RJ45 Console Port and 1 x USB Type C Port. Switch shall minimum 800 Gbps switching

capacity & packet forwarding rate of 600 Mpps million packets per second at 64 byte

packet length.The LAN switch shall support minimum 128K MAC addresses.The Switch must

Support Stacking up to 8 Units and upto 300 Gbps Bandwidth on Stacking. There shall be

2048 IGMP groups.The switch shall be able to work on both IPv4 and IPv6 (dual stack) from

day one. Switch should shoud support Layer 3 Features like RIP , OSPF v2/v3 , VRRP v2/v3

and ECMP.The LAN switch shall support IEEE 802.1Q VLAN encapsulation. Maximum 4K VLAN

Groups.It shall support for Automatic Negotiation of Trunking Protocol, to help minimize the

configuration & errors.It shall support 802.1d, 802.1p, 802.1Q, 802.1s, 802.1w, 802.1x,

802.1ab,802.3ad.It shall support 1k Routing Entries, with 256 IP Interfaces, spanning-tree root

guard or any other industry standard protocol to prevent other edge switches becoming

the root bridge, IGMP snooping v1, v2 and v3, Link Aggregation Protocol (LACP), ERPS ,

STP,MSTP,RSTP, PIM-DM (IPv4), 802.3ah Ethernet Link OAM for Detection of Unidirectional links

and to disable them to avoid problems such as spanning tree loops and shloud support for

S/I/T/C of 48 port network switch

1.Form factor: Height 1U (1.75 inch) max, mountable on wall, desk, rack with mounting kit.

(Rack mounting kit to be supplied along with the device)

i) Min 4 x 10GbE SFP+

ii) 48 x 1G copper ports

iii) Switches should be populated with minimum 4 x 10G single mode optical transceivers

from day-1, supporting minimum 2 KM distance from same OEM

3.Switching Bandwidth (full-duplex capacity): Minimum 176 Gbps non-blocking switching

4.Power Supply: 230V 50HZ AC (Indian Standard), Power Cable must be supplied.

5. Layer 2 feature: 802.1Q VLAN tagging with minimum number of VLAN supported: 1000 STP

(802.1D), Rapid-Spanning Tree (802.1w), MSTP (802.1s) VTP/802.1ak or equivalent for

registration/configuration of multiple VLANs LACP (IEEE 802.3ad) or equivalent for port-based

redundancy LLDP (802.1AB), At least 500 ARP entries.

6.Security features: IEEE 802.1x, RADIUS, TACACS+, Port-based & VLAN-based ACLs for IPv4

as well as IPv6 MAC based security on per port.

7.Management: SSHv2, as well as Web/HTTP/HTTPS (GUI) based management. SNMP v1, v2

8.QoS: 802.1p QoS/CoS and Classification based on IP address, MAC address, VLAN,

TCP/UDP port number.

9.Console Port: Required

10.Switch should be provided with NBD(Next Business Day) hardware replacement

warranty and ongoing software upgrades for all major and minor releases for a period of 5

11.The offered product must be EAL2/NDPP/NDcPP/FIPS 140-2 certified

NDSR-20 S/I/T/C of 24 port network switch Each 2 73500.00 147000

1. Form factor: Height 1U (1.75 inch) max, mountable on wall, desk, rack with mounting kit.

(Rack mounting kit to be supplied along with the device)

i) Min 4 x 10GbE SFP+

ii) 24 x 1G copper ports

ii) Switches should be populated with minimum 4 x 10G single mode optical transceivers

from day-1, supporting minimum 2 KM distance from same OEM

3. Switching Bandwidth (full-duplex capacity): Minimum 128 Gbps non-blocking switching

4.Power Supply: 230V 50HZ AC (Indian Standard), Power Cable must be supplied

5. Layer 2 feature: 802.1Q VLAN tagging with minimum number of VLAN supported: 1000

STP (802.1D), Rapid-Spanning Tree (802.1w), MSTP (802.1s) VTP/802.1ak or equivalent for

registration/configuration of multiple VLANs LACP (IEEE 802.3ad) or equivalent for port-based

redundancy LLDP (802.1AB), At least 500 ARP entries.

6. Security features: IEEE 802.1x, RADIUS, TACACS+, Port-based & VLAN-based ACLs for IPv4

as well as IPv6 MAC based security on per port.

7.Management: SSHv2, as well as Web/HTTP/HTTPS (GUI) based management. SNMP v1, v2

8. QoS: 802.1p QoS/CoS and Classification based on IP address, MAC address, VLAN,

TCP/UDP port number.

9.Console port: Required

10. Switch should be provided with NBD(Next Business Day) hardware replacement

warranty and ongoing software upgrades for all major and minor releases for a period of 5

11.The offered product must be EAL2/NDPP/NDcPP/FIPS 140-2 certified

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

NDSR-21 S/I/T/C of 8 port network switch Each 2 39500.00 79000

1. Form factor: Height 1U (1.75 inch) max, mountable on wall, desk, rack with mounting kit.

(Rack mounting kit to be supplied along with the device)

i) Min 4 x 10GbE SFP+

ii) 8 x 1G copper ports

ii) Switches should be populated with minimum 4 x 10G single mode optical transceivers

from day-1, supporting minimum 2 KM distance from same OEM

3. Switching Bandwidth (full-duplex capacity): Minimum 128 Gbps non-blocking switching

4.Power Supply: 230V 50HZ AC (Indian Standard), Power Cable must be supplied

5. Layer 2 feature: 802.1Q VLAN tagging with minimum number of VLAN supported: 1000

STP (802.1D), Rapid-Spanning Tree (802.1w), MSTP (802.1s) VTP/802.1ak or equivalent for

registration/configuration of multiple VLANs LACP (IEEE 802.3ad) or equivalent for port-based

redundancy LLDP (802.1AB), At least 500 ARP entries.

6. Security features: IEEE 802.1x, RADIUS, TACACS+, Port-based & VLAN-based ACLs for IPv4

as well as IPv6 MAC based security on per port.

7.Management: SSHv2, as well as Web/HTTP/HTTPS (GUI) based management. SNMP v1, v2

8. QoS: 802.1p QoS/CoS and Classification based on IP address, MAC address, VLAN,

TCP/UDP port number.

9.Console port: Required

10. Switch should be provided with NBD(Next Business Day) hardware replacement

warranty and ongoing software upgrades for all major and minor releases for a period of 5

11.The offered product must be EAL2/NDPP/NDcPP/FIPS 140-2 certified

NDSR-22 Supply, Installation, Testing & Commissioning of 1G Single Mode SFP Module. Each 30 22350.00 670500

38.0 NDSR-22 Supply and installation of following 19 inch width rack for ethernet switches with A.C.

distribution box, wire manager, fan tray, lockable front tinted glass door and two pair angle

to support the switch installed in the rack.

GI RACE WAYS FOR DATA ,TELEPHONE / UPS WIRING :

42.0 NDSR-23 Supply, laying & fixing 14 SWG Single comparatment GI race way of following sizes with 14

SWG openable covers at regular intervels alongwith neccessory cable support system as

directed including providing of all fixing accessories like cable ties etc. complete in all

respects including earthing of raceway with 4sq.mm. Cu. PVC insulated wires. Including

cutting/ chasing & finishing of floor and making good. Raceway shall be 10mm to 15 mm

below of Floor finish level.

43.0 NDSR-24 Supply & fixing of 14 SWG under floor box alongwith 10 SWG stainless steel cover plate

including chamfering of all 4 side edge.

TOTAL SUB HEAD B : DATA, TELEPHONE & T.V SYSTEM 1688716 5798747

SUB HEAD C : LUMINAIRE & FIXTURES

44.0 DSR-2022 -1.41 Installation, testing and commissioning of pre-wired, LED fitting / compact LED fitting of all Each 755 206.00 155530

types, complete with all accessories etc. directly on ceiling/ wall, including connection with

1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as

ARCHITECTURAL LIGHTING

45.0 NDSR-25 Supply ofRecessed downlight with HPE (High-Performance Efficiency) with LED (Light Each 242 2891.33 699703

Emitting Diode), maximum system power: 12 W, minimum Luminous flux of luminaire 1320 lm,

Colour temperature 4000 K, neutral white, CRI > 80, THD<5% , SDCM <3 , R9>0 230 V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

light emission, Housing in die-cast aluminium, Polyester powder white coloured coat applied

over a 5-stage pre-treatment trim, deep recessed prismatic diffuser for homogenous light

distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring,Electronic control gear,Protection

class II, IP 40,

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

46.0 NDSR-26 Supply of Recessed downlight with HPE (High-Performance Efficiency) with LED (Light Each 75 5841.33 438100

Emitting Diode), maximum system power: 12 W, minimum Luminous flux of luminaire 1320 lm,

Colour temperature 4000 K, neutral white, CRI > 80, THD<5% , SDCM <3 , R9>0 230 V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

light emission, Housing in die-cast aluminium, Polyester powder white coloured coat applied

over a 5-stage pre-treatment trim, deep recessed prismatic diffuser for homogenous light

distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring,DALI control gear,Protection class II,

47.0 NDSR-27 Supply ofModular pendant/surface/recessed luminaire with HPE (High-Performance Each 5 6549.33 32747

Efficiency) LED (Light Emitting Diode) maximum system power: 28 W PER 4 FEET, minimum

Luminous flux of luminaire 2750 lm, Colour temperature of 4000 K, Neutral white, CRI > 80,

SDCM<3 , R9>0 , THD <5% 230 V constant current driver, 70% of luminous flux after 50,000

operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium,

polyester powder white coated, pre-wired batten luminaire, snap-fit prismatic diffuser for

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic

control gear, Sliding fixing wire suspension,Protection class I, IP 40. (This fixture is used to

make different formations as per site requirement)

48.0 NDSR-28 Supply of Surface/Recessed mounted spotlight luminaire with LED (Light Emitting Diode) Each 55 6903.00 379665

maximum system power: 10 W, minimum Luminous flux of luminaire 800 lm, Colour

temperature of 4000 K, Neutral white, CRI >80, SDCM<3 , R9>0 230 V constant current driver,

70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission,

Luminaire profile in aluminium, Polyester powder Black coloured coat applied over a 5-

stage pre- treatment, With reflectors and beam angle of 45 degrees, ZHLS (ZERO HALOGEN

LOW SMOKE) internal wiring, Electronic control gear

Protection class II, IP 20, PL (max)=1500mm L = 200mm, B = 49 mm, H = 75 mm.

49.0 NDSR-29 Supply of Surface/Recessed mounted spotlight luminaire with LED (Light Emitting Diode) Each 6 9381.00 56286

maximum system power: 10 W, minimum Luminous flux of luminaire 800 lm, Colour

temperature of 4000 K, Neutral white, CRI >80, SDCM<3 , R9>0 230 V constant current driver,

70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission,

Luminaire profile in aluminium, Polyester powder Black coloured coat applied over a 5-

stage pre- treatment, With reflectors and beam angle of 45 degrees, ZHLS (ZERO HALOGEN

LOW SMOKE) internal wiring, DALI Electronic control gear

Protection class II, IP 20, PL (max)=1500mm L = 200mm, B = 49 mm, H = 75 mm.

50.0 NDSR-30 Supply of Surface mounted spotlight luminaire with LED (Light Emitting Diode) maximum Each 45 7965.00 358425

system power: 18 W, minimum Luminous flux of luminaire 1440 lm, Colour temperature of

4000 K, Neutral white, CRI >80, SDCM<3 , R9>0 230 V constant current driver, 70% of luminous

flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile

in aluminium, Polyester powder Black coloured coat applied over a 5- stage pre- treatment,

With reflectors and beam angle of 45 degrees, ZHLS (ZERO HALOGEN LOW SMOKE) internal

wiring, Electronic control gear

Protection class II, IP 20, PL (max)=1500mm L = 200mm, B = 49 mm, H = 75 mm.

51.0 NDSR-31 Supply of Non LED Track Three Phase, Wall / Surface / Ceiling Mounted, 1000mm, Black Each 2 3430.00 6860

Luminaire Profile,

52.0 NDSR-32 Supply of LED Track spotlight with LED(Light Emitting Diode) maximum system power: 15W, Each 5 8703.33 43517

minimum luminous flux of luminaire 1200lm, CRI>80, SDCM <3 , R9>0 230V constant current

driver, direct light mission, integrated control gear box in die-cast aluminium - thermo

painted white, aluminium die-cast reflector housing - thermo painted silver, reflector with

faceted ball in aluminium steamed brilliant polished, narrow beam, wide coverage of Track

spotlight (180° rotation) integral electronic control gear, with conductor track adaptor for

three circuit track Protection class I, IP20 Ø= 90 mm, Ht = 65 mm, Swivel movement 180°

53.0 NDSR-33 Supply of Recessed downlight with HPE (High-Performance Efficiency) with LED (Light Each 10 3363.33 33633

Emitting Diode), maximum system power: 15 W, minimum Luminous flux of luminaire 1650 lm,

Colour temperature 4000 K, neutral white, CRI > 80, SDCM<3 , R9>0 , THD<5% 230 V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

light emission, Housing in die-cast aluminium, Polyester powder white coloured coat applied

over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, ZHLS

(ZERO HALOGEN LOW SMOKE) wiring,Electronic control gear,Protection class II, IP 40,

54.0 NDSR-34 Supply ofCOB based ceiling recessed mounted luminaire with maximum system power: 15 Each 10 6430.00 64300

W, minimum Luminous flux of luminaire 1200lm lm, Colour temperature of 4000 K, neutral

white, SDCM 3, CRI > 80, SDCM<3 , R9>0 230 V constant current driver, 70% of luminous flux

after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in

aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment,

Clear glass cover, prismatic diffuser, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring,

Electronic control gear,Protection class II, IP 20,

55.0 NDSR-35 Supply of LED strip (flexible) with aluminium extrusion and diffuser, 120 LEDs per meter, 2835 Meter 105 6490.00 681450

SMD package with a thermal tape of high thermal convection factor, system power:

10W/Meter, luminous flux 700lm, colour temperature of 4000K, CRI>80, anodized aluminium

extrusion, opal diffuser, constant voltage driving circuit,Electronic control gear,Protection

ITEM REF NO. DESCRIPTION UNIT QTY. RATE DSR-2022 NDSR

NO. AMOUNT AMOUNT

56.0 NDSR-36 Supply of LED strip (flexible) with aluminium extrusion and diffuser, 120 LEDs per meter, 2835 Meter 35 6353.33 222367

SMD package with a thermal tape of high thermal convection factor, system power:

6W/Meter, luminous flux 420lm, colour temperature of 4000K, CRI>80, anodized aluminium

extrusion, opal diffuser, constant voltage driving circuit ,Electronic control gear,Protection