Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC 99 OLD SANTOSHI NAGAR OPP TO DEVIKA GAS AGENCY JULE SOLAPUR SOLAPUR 413004 | SOLAPUR | SOLAPUR | MAHARASHTRA | 413004 | ₹19.8 L | L1 | Accepted-AOC lower quoted rate than other bidder |
| 2 | L2₹20.0 LRejected-Finance | ₹20.0 L | L2 | Rejected-Finance HIGHQUOTED RATE |
| 3 | L3₹20.4 LRejected-Finance | ₹20.4 L | L3 | Rejected-Finance HIGHQUOTED RATE THAN OTHER BIDDER |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹19.8 L
EMD Value
₹19,800
Closing Date
23 Mar 2026, 5:00 pmClosed
SARPANCH VILLAGE PANCHYAT ANKALAGE
AT POST ANKALAGE , TAL AKKALKOT , DIST SOLAPUR 413219
CONSTRUCTION OF VILLAGE PANCHYAT OFFICE BUILDING , AT- ANKALAGE , TAL - AKKALKOT , DIST - SOLAPUR
2026_SOLAP_1287204_1
2025-26
Open Tender
Civil Works
AT POST ANKALAGE, TAL- AKKALKOT, DIST- SOLAPUR
PLEASE REFER TENDER DOCUMENTS
5 documents required · 5 mandatory
₹1,000
₹19,800
Yes
24 Apr 2026
16 Mar 2026
25 Mar 2026
16 Mar 2026
23 Mar 2026
16 Mar 2026
16 Mar 2026 - 23 Mar 2026
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift Upto1.5 M.) By Mechanical Means SSR Pg No./It No. 153/721/21.02 Spec. No. : Bd A.1 Page No. 259
Excavation for foundation in hard murum including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete ( Lift Upto 1.5 m) By Mechanical Means. SSR Pg No./It No. 153/725/21.06/BDA2 Spec. No. : Bd A. 2 Page No. 259
Providing and laying Casting in situ,/ Ready mix concrete cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel Centering ,formwork, laying / pumping, compacting,roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed sand VSI Grade finally washed etc.) SSR Pg No./It No. 175/827/24.01/BDE1 Spec. No. Bd. E. 1 Page No. 287
Providing and laying in situ/ Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.178/836/25.11/BDF3 Spec. No. Bd. F. 3 Page No. 298 and B-7 Page No. 38
Providing and casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.179/841/25.31/BDF5 Spec. No.:Bd. F. 5 Page No. 300 and B-7'Page No.38
Providing & casting in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.181/846/25.50/BDF6 Spec. No. : Bd.F.6Page No.300 and B-7, Page No. 38
Providing & casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No. 184/856/26.05/BDF9 Spec. No. : Bd.F.9 Page No.303 and B-7, Page No. 38
Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.185/860/26.17/BDF11 Spec.No. :Bd. F.11 Page No.304.and B-7,Page No. 38
Providing and casting in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.182/851/25.70/BDF8 Spec. No. :Bd.F.8 Page No. 302 and B-7, Page No.38
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete. SSR Pg No./It No.197/889/27.01/BDG1 Spec. No. Bd.G.1 Page No. 313
Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding etc Complete. SSR Pg No./It No.197/892/27.05/BDG5 Spec. No. Bd.G.5 Page No. 315
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm at every third course, properly bend and bonded at ends scaffolding, racking out joints and watering complete. SSR Pg No./It No.197/893/27.06/BDG7 Spec. No. : Bd.G.7 Page No. 316
Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR Pg No./It No. 188/871/26.33/BDF17 Spec. No. : Bd.F.17, Page No. 306
Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. SSR Pg No./It No.157/750/21.36/BDA10 Spec. No. Bd. A 10 Page No. 262
Filling in plinth and floors with contractor’s material / brought from out side and approved by engineer incharge in layer of 15 cm to 20 cm including watering and compaction. Etc complete. SSR Pg No./It No.157/751/21.37/BDA11 Spec. No. Bd. A 11 Page No. 263
Providing internal cement plaster 6 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 209/956/32.02/BDL1 Spec. No. : Bd.L.1 Page No. 367
Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 209/959/32.05/BDL2B Spec. No. : Bd.L.2 Page No. 368
Providing internal cement plaster 20 mm thick in two coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 209/962/32.08/BDL4B Spec. No. : Bd.L.4 Page No. 368
Providing neeru finish to plastered surfaces in a all positions including scaffolding and curing complete. SSR Pg No./It 210/966/32.15/BDL10 Spec. No.: Bd.L. 10 Page No. 370
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.. SSR Pg No./It No.220/1051/33.67/BDM Spec. No. Bd. M.12 Page No. 385
Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. SSR Pg No./It No.245/1195/39.02/BDT Spec. As directed by Engineer in charge
Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. SSR Pg No./It No.246/1203/39.10/BDT36 Spec.No.BDT-36 Page No.500
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. SSR Pg No./It No.220/1052/33.68/BDM Spec.No.As Directed By Engineer Incharge
Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete SSR Pg No./It No.250/1224/39.58/BDT Spec. As Directed By Engineer Incharge
Providing and laying polished machine cut shahabad stone slabs 20 to 25 mm thick for treads and risers of steps and staircases,with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float , filling joints with neat cement slurry, curing, polishing and cleaning complete. SSR Pg No./It No.214/1004/33.17/BDM22 Spec. No. Bd. M. 22 Page No. 390
Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sq.m as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR Pg No./It No. 264/1291/40.01/BDU1 Spec. No. : Bd.U.1 Page No. 537
Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sq.m as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR Pg No./It No. 265/1292/40.02/BDU1 Spec. No. : Bd.U.1 Page No. 537
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. SSR Pg No./It No.259/1263/39.68/BDT Spec.No. As directed by Engineer in charge
Providing and applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat.) complete. SSR Pg No./It No. 227/1106/36.11/BDP5A Spec. No. : Bd. P. 5 Page No. 413
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces, watering for two days complete. SSR Pg No./It No. 224/10831/35.13/BDO8 Spec.No.:Bd.O. 8 Page No. 406
Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including “S” trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. SSR Pg No./It No. 277/1401/42.30/BDV Spec. : As directed by Engineer in charge.
Providing and fixing 10cm PVC Nahani Trap With greating etc. complete. SSR P.No.281/1438/42.67/BDV32 Spec.As directed by Engineer Incharges
Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. etc. complete. SSR Pg No./It No.275/1390/42.19/BDV46 Spec.No.Bd.V.46 Page No.576
Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. SSR Pg No./It No. 46/205/6.05/MORTH801 Spec. No. :MORTH 801
ADD FOR SAND ROYALTY CHARGES
ADD FOR OTHER MINERALS ROYALTY CHARGES
Test of Bricks -Water Absorption (Set of 5 Bricks). Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) SSR Pg No./It No.584/13
Test of Concrete - Compressive Strength OF C.C. M10,C20 Cube (Set of 3 cubes) SSR Pg No./It No.584/19
Test of Mortor - Compressive Strength OF C.C. Cube (Set of 3 cubes) SSR Pg No./It No. 585/27
Test of Steel 6mm,8mm,10mm,12mm,16mm dia -Tensile strength , %, Elongation, Yield Stress, Weight -Per Meter, Bend/ Rebend Test, Proof Stress. SSR Pg No./It No. 586/77
ADD 18.00% FOR G.S.T. CHARGES
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
SBDank.pdf
Tender Documents • 1.67 MB
BOQ_2213394.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid