Construction of 8 feet high boundary wall enclosure along with periphery of farm land at KVK, Mandkola

Amount

Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres (HSR 6.6)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth.(HSR 10.28)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59)

Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate without 2 coats of bitumen (HSR 10.115-Note)

First class brick work laid in cement sand mortar 1:4 in foundation and plinth (HSR 11.4)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level {HSR 11.9}

12 mm thick cement plaster 1:4 on walls (HSR 15.5)

Cement pointing 1:2 deep variety on brick and tile work (HSR 15.60)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface (HSR 16.9)

Finishing walls with exterior decorative cement based paints such as snowcem , Robbiacem etc. on new work, two coats to give an even shade.(HSR 16.61)

Wrought iron and mild steel (using angles, flats square bars. tees and channels) ladders, grills, gratting frames, window guards, iron door openable or fixed stair case or parapet or any other type of railing , gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position {HSR 18.12}

Providing and fixing G.I. barbed wire fencing (made of wires of TATA make), weighing 13.60 kg to 15.50 kg per 100 meters (Horizontal/diagonal) and fixed with G.I. wire of 12 gauge or providing cut including drilling holes in the posts, complete in all respects as directed by Engineer-in-Charge (including the cost of G.I. wire used for binding which shall not be measured for payment but excluding cost of posts, which are payable separately). (NS)

Removing of existing old barbed wire fencing including making its rolls and shifting the same to store within a lead of 2 km., complete in all respect as directed by Engineer-in-Charge

Removing/dismantling of existing angle iron/RCC posts including cement concrete blocks from fencing and shifting the same to store within lead of 2 km, complete in all respects, as directed by Engineer-in-Charge

M/s Shri Balaji Construction Co