REPAIR TO DRAIN, FENCING, COMPOUND WALL, RCC JOLLIE AND PRECAST COVER AND CERTAIN OTHER ITEMS UNDER AGE B/R-II OF GE GWALIOR

Amount

Dismantling of timber in fillets, rails, posts, rafters, purlins etc under 40 Sq. cm provided for complete all as specified and as directed.

Excavating in posts holes (or similar holes) in Soft/loose soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface.

M&L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting, etc and similar work conforming to Fe-290 Gde E -165 complete all as specified and directed.

S&F framed work ORNAMENTAL AND INTRICATE DESIGN such as grills, gratings, etc with ends of barss shouldered and/or riveted or forged into spikes framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165.

Supply only, chain link fencing of MS galvanized fencing, any size or type.

Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured).

M&L galvanized Concertina coil, duly stretched, maintaining a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and as directed at site.

M & L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth applying two coats of synthetic enamel paint over a coats of red oxide primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint as one coat including Preparation of new Steel surface over 10 cm width or girth comlete all as specified and directed.

Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. Note : Demolition material throughout MOD Land rate include above item.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for vitrified paver colour tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Demolition of brick work/stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

M&L for rubble random rubble uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

M&L of flush pointing to RR masonary walling brought upto course in CM (1:4) complete as directed.

M&L for pre stressed pre cast RCC (M-25 grade) column cross section 150mm X 150mm with conineous vertical grooves of size 60mmX35mm at two sides of column to receive the precast panels including reinforced with 7 Nos wire of 3mm dia high tensile corbonized steel surfaces finished even and smooth including errecting in position all as specified and as directed.

M&L for pre stressed pre cast RCC (M-25 grade) panels of cross section of panel (300cm x 45cm) reinforced with 4 Nos wire of 3mm dia high tensile corbonized steel including fixing in position in between column grooves and joining and flush pointing of all horizontal and vertical joints of panels with cement mortar 1:3 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, kerb, haunching etc including necessary formwork complete all as specified and directed.

M&L for PCC Type D2 (1:4:8) using 40mm graded stone aggregate as in foundation filling mass concrete, complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

Material and labour for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 (12.5 mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seismic and other similar bands, plinth course, string course, lacing course, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water throughs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 (using 20 mm graded stone aggregate ) as in coloumns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L use and waste formwork for to sides of pillar, post, struts, pier column rough finished surfaces of concrete rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 5 mm and over upto and including 10 mm dia, as in stirrups, spacers, and binders, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking platforms including rounding off the exposed edges and polishing all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Paymentfor providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium pipe of size 15mm x 15mm and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

S&F for machine pressed precast Coloured chequered concrete Tile with grey cement and pigments (Rubber mould casted Glossy finish) size 300x300mm of 22 to 25mm thick over 20mm thick CM (1:6) screed bed complete all as specified and directed.

M&L for providing 25mm thick precast cement concrete louvres and jallies fency type B-0 (1:2:4) (using 12.5mm graded aggregate) set in cement mortar (1:4) (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately).

M&L for providing factory made perforated precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) Set in cement mortar 1:4 in but in manhole cover slabs (for man holes/Drain cover etc) with plain faces.

Taking down decrepit existing cement plaster loose/ unsound debilitate cement concrete of any description and and in any position from existing external/internal surface of RCC slabs/beam /columns/RCC facia etc average profundity up to 50mm (max height upto 25m from existing ground level) with power driven of pneumatic chisel and disposal of unserviceable material i.e. debris and rubbish outside MOD land as directed upto 1.5km of lead including cutting of all edges making square shoulders of the cavities roughening the smooth surfaces, abrade out/expel corrosion all loose/scale/rust etc from the observed reinforcement by applying alkaline based rust remover MAXCURE RR and cleaning the steel reinforcement properly and after 24 hrs clear the reinforcement thoroughly using wire Brush. After this apply protezione ferro mono single component cementitious corrosion primer in two layers on observed reinforcement surface to create a continuous film not less than 1mm thick and preparing the surface to get epoxy grout mortar including providing necessary proporation bracing and runners to relieve the member from the load coming on it with working platform as required and as per design and pattern including preparing the surface to coordinate with the existing surface, complete all as specified and directed by Engineer in-charge. Note : The work will be executed upto height of 25 meter.

M&L for providing and fixing welded MS wire mesh weight not less than @ 1Kg/Sqm and applying anti- corrosion primer single component, cementitious inhibiting primer in two layers on observed surface to create thickness not less than 1mm using Protezione Ferro Mono and applying 25mm thick one component, thixotropic fiber reinforced polymer modified dual shrinkage compensated, cementitious patch repair mortar Renotroc SP & O comlast WL Extra in W/P ratio 0.16 mixed with liquid water proofing admixture confirming to IS:2645-2003 to be applied on the surface before platering and as per recommendation of manufacturer complete all as specified and directed. Note : The work will be executed upto height of 25 meter.

M&L for applying two coats of water proofing and protective coating on internal/external walls, floors and ceiling of tanks etc with Brush Bond and providing 10mm thick polymer modified rendering in CM 1:4 mixed with liquid based water proofing liquid admixture confirming to IS2645-2003 and surface shall be finished even and smooth without using extra cement including all necessary formwork timbering planking and shuttering etc and finishing the surface to match with existing surface complete all on specified and directed. Note : The work will be executed upto height of 25 meter.

M&L for curing of the surface using viscosity alkali reactive wax based concrete curing compound concure WB STD white MAXCURE CC 75 including all necessary tools including adoption of necessary safety arrangements like safety belts, ropes, helmets, netting etc which are required for safety of working at height exceeding 3 m to 25 m height shall be mandatory and deemed to be inclusive in quoted rates complete all as specified and directed. Note : The work will be executed upto height of 25 meter.

M&L for complete removal of existing treatment by mechanical means and washing down with clean water and applying two coats of exterior emulsion paint (weather coat) over a coat of primer complete all as specified and directed. Note : The work will be executed upto height of 25 meter.

Dismantling of wrought iron or mild steel work of any decription, any position not otherwise described for complete all as specified and directed. Note : The work will be executed upto height of 25 meter.

M&L for fixing MS framed work such as framed guard bars barred iron doors, ladders, framed balusters, walkways, railing and similar work confining to Fe-290, Gde E- 165 for overhead tank any position made of MS angle/ MS Pipe with nuts and bolts or butt welded etc complete all on specified and directed. Note : The work will be executed upto height of 25 meter.

M&L for applying one coat of synthetic enamel paint over old mild steel surface including preparation of old surface complete all as specified. Note : The work will be executed upto height of 25 meter.

MAHARAJ KUNWAR SAHAB CONSTRUCTION (BID ID -3449957)

M/S LAKSHYA CONSTRUCTIONS (BID ID -3449792)

JEE JEE BUILDERS (BID ID -3454220)