CWE/GGN/FT-18/2022-23 PROVN OF APPROACH ROAD AND CERTAIN ADDN ALTN TO GATES AND OTHER CONNECTED ITEMS IN MCC BASANT NAGAR UNDER GE AF FARIDABAD

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 21 Cm deep and getting out in Hard dense soil complete all as specified and directed.

M&L for Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 Tonne and not exceeding 12 Tonne complete all as specified and directed.

M&L for Soling or sub base with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber for 150 mm thick spread thickness complete all as specified and directed.

M & L for 75 mm thick (Compacted thickness) WBM, with using lime sand stone aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer using paving bitumen VG 10 of any penetration at 10 Kg. Per 10 Sq. metres complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with @ 5.5% paving bitumen (VG 30) by weight of total mix, laid/rolled with mechanical paver and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and as directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick available and approved with soil complete all as specified and as directed.

Removing excavated soils exceeding 1.50 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and as directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for plain cement concrete in 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerb stones weathering sightly rounded complete all as specified and directed by Engr-in- Charge.

M&L for Plain Cement Concrete in 1:2:4 type B0 (using 12 mm graded stone aggregate) for coping work complete all as specified and as directed.

M&L for RCC Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves in 1:2:4 using type B1 using 20 mm graded stone aggregate complete all as specified and as directed.

M&L for RCC for walls, retaining wall in 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and as directed.

M&L for TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spically for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed .

Complete all as above but in 6 to 8mm dia and over as in stirrups complete all as specified and directed.

M/L for moorum fillng in floors or pavings,laid in layers n.exc 15 cm thick spreading, levelling and ramming including watering complete all as specified and directed.

M&L for Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed.

M&L for Fair finished flat Form work to vertical surfaces such as walls and stair case etc , similar work exc 200 mm thick complete all as specified and directed.

Fixing only framed work such as gates railing and similar works confirming to FE 290 complete all as specified and all as directed

M&L for one coat of synthetic enamal paint for old steel surfaces complete all as specified and directed.

M/L for preparaton of new or previously untreated surface to receive the thermoplastic paint and making of guide lines, dashes, arrows, letters etc with reflective thermoplastic paint 2.0 to 2.50 mm thick white, golden, yellow or black colour as required using glass beads necessary for achieving reflection on roads, pavements and the like of any description and any width allas per MOST clause 803.4 and BS 6068 complete all as specified and directed by Engr-in-charge.

M&L Preparing new surface of wall and applying two coats of cement primer over one coat of primer all as directed

Supply, Transpoting to site, erecting & fixing in vertical position, steel tubular sewaged swan neck type & welded pole straight in length of overall height 8.5 mtr type 410 SP-22 as per IS-2713 marked with mild steel steel base plate (fillet welded to poles) pole cap/ final taper plug, bolts, nuts, washers for fixing of fittings incl 1.2 mtr GI pipe medium grade 32 mm bore bracket and MS Clamp and painting on the outside with two coat of aluminium paint over a coat of red oxide on exposed surface and black bituminous paint on steel surface embedded in concrete & painting 03 nos band/ strips with yellow & black synthetic paint (30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles complete all as specified and directed. Note : Quoted Rate shall be inclusive for Excavation & PCC work in foundation.

S&F new generation energy saving and environment friendly long life 25 watt LED street light fitting with pressure die cast aluminium housing with high power LED as light source and lens embeded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 suitable for pole complete with all accesories including connected with twin core twisted flexible copper conductor wire of suitable size including fixing arrangement complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in duct, along wall or passing through pipe 1100 volts grade, heavy duty XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor cross sectional area 10 Sqmm 4 core complete all as specified and directed.

Akhil Enterprises

PAWAN KUMAR

LAXMI BUILDERS

High Tech Metal India