Special repair by providing fire fighting and fire system arrangement in B K Civil Hospital at Faridabad REINVITED

Amount

Part-1: Fire Fighting Pumps, Piping, Valve & Accessories, (1) Fire Pump: Electric operated main & standby fire pump (i) Supplying, installation, testing and commissioning of electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects as required. (a) Horizontal type, multistage, centrifugal, split casting pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 (b) Suitable HP squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volt, 3 phase 50 Hz, ac supply with IP 55 protection for enclosure, horizontal foot mounted type with class ‘F’ insulations, conforming IS-325 for hydrant system make kilosker, lubi mother and paltt, ashok Leyland. 1620 LPM suitable for 88 Mtr Head (DSR-1.7)

JOCKEY PUMP: Electrical operated pump (180 LPM) Head 70 M. (I) Supplying, installation, testing and commissioning of electric driven pressurization pump suitable for automatic operation and consisting of following, complete in all respects, as required; (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS; 1520. Suitable HP squirell cage induction motor tefc type suitable for operation on 415 volt, 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with class- ‘F’ insulation conforming to IS; 325n M. S fabricated common base plate, coupling, coupling guard, foundation bolt etc are required. M. S fabricated bolt etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pad MAKE KILOSKER, LUBI MOTHER AND PLATT, ASHOK LETLAND 180 LPM suitable for 88 Mtr (DSR-3.1)

Providing laying, testing & commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, tees, flanges, tapers, nuts bolt, gaskets etc. And fixing the piep on the wall/ ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make HISAR JIDEL, TATA, PARKSH SURYA (i) 200 NB (DSR -7.9)

150 NB (DSR-7.8)

100 NB (DSR-7.7)

80 NB (DSR-7.6)

65 NB (DSR 7.5.)

50 NB (DSR 7.4.)

25 NB (DSR 7.1.)

Supplying, installation, testing and commissioning of Bronze Ball valve with (suitable for test pressure of not less than 15 Kg/ sqcm of the following size including providing necessary union/ flange (N.S.) (i) 50 NB

Providing, installation, testing and commissioning of stainless stell Y- strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia hole with stainless steel flange. 250 mm dia MAKE-KARTAR/LEADER, NEW AGE, SANT (i) 200 NB (DSR 15.5)

80 NB (DSR 15.1)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked complete with nuts, bolt, washers, gaskets conforming to IS 13095 of following sizes as required MAKE KARTAR/ ZOLOTO/CASTLE, KIRLOSKAR, NEW AGE, SANT, OR EQULENT (i) 200 NB (DSR 11.7)

150 NB (DSR 11.6)

100 NB (DSR 11.5)

80 NB (DSR 11.4)

65 NB (DSR 11.3)

Providing, installation, testing and commissioning of non- return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolt, nuts, washers etc. as required MAKE-KARTAR,/ZOLOTO/CASTLE, KIRLOSKAR, NEW AGE, SANT OR EQULENT. (i) 200 NB (DSR 14.8)

150 NB (DSR 14.7)

80 NB (DSR 14.4)

65 NB (DSR 14.3)

Providing and fixing of pressure relief valve suitable for pressure of 15 Kg/ Sq. CM including flanges, nuts, bolts, washers etc. complete as required C.I dual plate non-return valve [PN 1.6 rating (16 Kg/cm2 ] conforming to IS 778 and test pressure not less than 20 kg/cm2, complete 2 nos. matching flanges, rubber insertion, with nuts, bolts and washers etc of following sizes. (N.S)

Providing & fixing of pressure switch in M.S pipe line including connection MAKE0INDOFUS/DANFOS/SWITZER (DSR-22)

Providing and fixing 150 mm diameter, Bourden type, Brass, Dfial type Pressure Gauge calibrated for for )-16Kg/Sq.mm range with brass isolation valve complete. [N.S]

Supply and installation of 100 NB Draw out connection in Fire water tank (N.S)

Supply and installation of 100 NB Emergency Connection to Fire Water Tank. (N.S)

Supply, installation, testing & commissioning CI foot valves with all accessories inline with the tech space 15360 (a) 100 NB (N.S)

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS Sheet, 1200 mm in height with air release valve on top and flanges connection to riser, draing arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required, MAKE FIRE CUT/ HYDROTECH. (DSR-2.0)

Supply, installation, testing and commissioning of 4 way fire brigade inlet connection in mains near suitable location with NRV-150 NB & Butterfly valve-150 NB with all other accessories located in Fire water tank. (N.S)

Supplying, fabricating Structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fastners, clamps, threaded rods, nuts, bolts, washners etc. complete with painting. (N.S)

Water level indication including all necessary fittings and cabling upto the panel (N.S)

Supply/ fabrication and installation of Anti vortex device including elbow for 200 mm dia pump suction line (N.S)

Part-II: Hydrant System Supplying installing, testing & commissioning of M.S Galvanized pipes confirming to IS: 1239 PT-I Heavy grade Class-C for 15 NB to 150 NB and IS : 3589 Gr 410 ERW pipe (min 6mm thck) for 200 NB & above with suitable type of supports (shall be fabricated by M.S Channel/ Angle/ Flat for above 50mm dia), anchor fastners, bolt, nuts clamps “U” bolts, Pipe fittings such as Reducers, Tees, Elbows, Flanges, including cutting, grooving, Welding, Fixing in/ on walls, ceiling by using suitable supports etc. as per drawings with painting as PO Red as per shade 536. (a) 150 NB (DSR -7.8)

100 NB (DSR- 7.7)

80 NB (DSR-7.6)

65 NB (DSR-7.5)

50 NB (DSR 7.4)

40 NB (DSR 7.3)

32 NB (DSR 7.2)

25 NB (DSR 7.1)

Supplying and fixing single headed internal and external yard hydrant valve with instantaneous stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to UIS 5290 (Type-A) with blank stainless steel cap and cahin as required (MAKE: TYCO/SAFEX/HD/KARTAR, FIRE CUT, NEW AGE) (DSR-9.2)

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female coupling duly bond with GI WIRE, RIVETS ETC.. CONFIRMING TO IS 636 (Type-A) as required. Make/ Fire Cut/ Newage/Minimax/ Kartar/ Safex (DSR-16.2)

Supplying & fixing 63 mm dia Stainless steel (grade 304) short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to iIs 903 suitable for instantaneous connection to interconnect hose pipe coupling as required (Make:/ Fire Cut/ New Age/ Kartar/Minimax/Safex) (DSR-18.2)

Providing and fixing Fire Man Axe conforming to IS:926:1985 with clamps (N.S)

Providing and fixing wall mounted swinging type First- Aid Fire Hose Reel confirming to IS: 884:1985 and specification having 25 mm diameter and 45M length. The Hose Reel must be non kinking type made up of Thermo Plastics (N.S)

Providing, fabricating and fixing double leaf door with frame only for internal fire hydrants fabricated frm MS sections, welded construction, having glazed panels with reinforced glass with locking arrangement, stove enameled fire red finish with “Fire Hose” written on front, suitable to house two nos. 15 m lengths of RRL hose with couplings, 1 No. Branch pipe and 1 No. First Aid Fire Hose Reel along with the landing valve all complete (Door Size-2100 x 1200mm) (N.S)

Supplying, fixing, testing and commissioning of butterfly vave of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13.095 of FOLLOWING SIZES AS REQUIRED MAKE-KARTAR/ZOLOTO/CASTLE, KILOSKAR, NEWAGE, SANT, OR EQULENT (a) 150 NB (DSR 11.6)

100 NB (for each hydrant) (DSR 11.5)

Providing & fixing 150 mm diameter, Bourden type, Brass, Dial type Pressure Gauge calibrated for 0-16 Kg/ Sq.mm range with brass isolation valve complete. (N.S)

Providing & fixing of Air Release Valve suitable for pressure of 15 Kg/ Sq.cm including flanges, nuts, bolts, washers etc. completed as required (N.S)

Supply, installation of Hume pipe 2.0 m NP-4 class for road crossing of Fire Water Pipe. (i) 300 mm for 100 NB & 80 NB pipe

Supplying installing, testing and commissioning of Granze Ball Valve with (Suitable for test pressure of not less than 15 Kg/ Sqcm of the following size including providing necessary union/ flange(N.S) (i) 25 DIA mm

Part - III Sprinkler System : Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/ bronze working parts comprising of water moter alarm, bronze seat clapper, clapper, clapper arm and hydraulically driven mechanicals gong bell to sound continuous alarm when the wet riser/ sprinkler system activates, pressure switch, cock valve complete with drain valve and byepass, test control box, ball valves MS pipe of required size, flanges, orifice plate, gasket etc of following sizes as required 150 mm dia make- HD, OMEX, Getech, Newage (DSR-24.3) (a) 150 NB

Providing and fixing electrically operated flow indicating Switches including 1.5mm thick gasket, nuts and bolts complete as per specification (N.S) (a) 80 NB

Providing and fixing of stainless steel (AISI 304) braided flexible sprinkler pipe drops of 20 mm dia of following length and maximum working pressure of 175 psi with all accessories and clamps as required. The flexible pipe drop shall be UL approved. The pipe drop shall be of following sizes. (N.S) (i) 1200 mm long

Providing and fixing inspector test connection with by pass line isolation ball valve and drain valve (N.S)

Providing & fixing 15mm dia gunmetal/ brass quartzoid type sprinkler Head (N.S) (i) Pendent, 68 C, Chrome Plated

Upright type 68 C, Chrome plated

Side wall extended throw 20 mm dia 68 C, Chrome Plated

PART-IV FIRE EXTINGUISHER (i) CO2 type (4.5 KG Cap, IS :2878) N.S

Dry Chemical Powder ABC type (6 Kg Cap. IS: 15683) (N.S)