Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAdmitted-Finance | ₹24.5 L | L1 | Admitted-Finance |
| 2 | L2₹24.8 L+₹28,005 (1.14%)Admitted-Finance | ₹24.8 L+₹28,005 (1.14%) | L2 | Admitted-Finance |
| 3 | L3₹29.5 L+₹5.0 L (20.3%)Admitted-Finance | ₹29.5 L+₹5.0 L (20.3%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M CHANDRAN PILLAI L3 | GANESH ENTERPRISE L1 | B R Enterprise L2 |
|---|---|---|---|---|---|---|
| 1.00SCHEDULE ‘A’ PART-I (SCHEDULE OF ITEMS) | ||||||
| 1.01 | M & L for servicing and replacement filtre media of Iron Removal Plant (IRP) of 10K Gln/Hrs Capactiy, unserviceable strainers, packings and nuts/bolts/washers etc of IRPs and deposited to place where directed including cleaning the surfaces of IRP and all accessories with emery paper, preparing the surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer on outer surfaces and two coat of black bituminous paint on inner surfaces and connecting pipes as per colour codes and filling fresh filter media (i.e Faine sand, Trated sand, activated carbon, anthracite, Gravesl from 1/2 inch to 1 Inch) with replacement of unserviceable parts ect all as specified and directed. (Note : Replacing of filter media, valves, stainers and guages shall be measured and paid for separately under respective item of schedule) | 2 | Each Job | 3,30,000 ₹3,30,000 | 3,08,000 ₹3,08,000 Lowest | 3,16,000 ₹3,16,000 |
| 1.02 | M & L for servicing and replacement filtre media of Iron Removal Plant (IRP) of 5K Gln/Hrs Capactiy, unserviceable strainers, packings and nuts/bolts/washers etc of IRPs and deposited to place where directed including cleaning the surfaces of IRP and all accessories with emery paper, preparing the surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer on outer surfaces and two coat of black bituminous paint on inner surfaces and connecting pipes as per colour codes and filling fresh filter media (i.e Faine sand, Trated sand, activated carbon, anthracite, Gravesl from 1/2 inch to 1 Inch) with replacement of unserviceable parts ect all as specified and directed. (Note : Replacing of filter media, valves, stainers and guages shall be measured and paid for separately under respective item of schedule) | 1 | Each Job | 1,25,000 ₹1,25,000 | 1,08,000 ₹1,08,000 Lowest | 1,10,900 ₹1,10,900 |
| 1.03 | Replacement of barracker filter sand with complete all as specified and directed by Engr-In-charge. | 300 | Bags | 3,30,000 ₹3,30,000 | 2,92,500 ₹2,92,500 Lowest | 2,94,000 ₹2,94,000 |
| 1.04 | Replacement of gravels of various sizes as per site requirement complet all as specified and directed by Engr-In-Charge | 246 | Bags | 2,21,400 ₹2,21,400 | 2,07,870 ₹2,07,870 Lowest | 2,09,100 ₹2,09,100 |
| 1.05 | Replacement of Anthracite as per site requirement complet all as specified and directed by Engr-In-Charge | 150 | Bags | 3,15,000 ₹3,15,000 | 2,77,500 ₹2,77,500 Lowest | 2,95,500 ₹2,95,500 |
| 1.06 | Replacement of Activated Carbon as per site requirement complet all as specified and directed by Engr-In-Charge | 210 | Bags | 4,20,000 ₹4,20,000 | 4,09,500 ₹4,09,500 Lowest | 4,17,900 ₹4,17,900 |
| 1.07 | Supply & fixing Butterfly valve suitable for existing IRP of capacity 5K to 10K Gln/Hrs. | 4 | Each | 43,600 ₹43,600 | 39,960 ₹39,960 Lowest | 41,200 ₹41,200 |
| 1.08 | Providing and fixing G.I. pipes of 80 mm dia complete with G.I. fittings including trenching and refilling and takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge | 25 | Metre | 31,250 ₹31,250 | 26,250 ₹26,250 Lowest | 27,500 ₹27,500 |
| 1.09 | Providing and fixing G.I. pipes of 50 mm dia complete with G.I. fittings including trenching and refilling and takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge | 25 | Metre | 20,000 ₹20,000 | 18,750 ₹18,750 Lowest | 18,875 ₹18,875 |
Tender Value
Refer Docs
EMD Value
₹48,500
Closing Date
30 Sept 2025, 10:30 amClosed
Commandant ARC and MC
Assam Rifles Constr and Maint Company
Comprehensive maint of water supply installation, filtration plant, pump, motors with allied works at Laitkor Grn
2025_ARMHA_877762_1
ENG/III-235/2025-26/38 DATE 16 Sep 2025
Open Tender
Civil Works
Works
270 days
Laitkor
As per Tender Document
2 documents required · 2 mandatory
₹1,000
Commandant ARC and MC
₹48,500
25 Nov 2025
16 Sept 2025
3 Oct 2025
16 Sept 2025
30 Sept 2025
16 Sept 2025
16 Sept 2025 - 30 Sept 2025
SCHEDULE ‘A’ PART-I (SCHEDULE OF ITEMS)
M & L for servicing and replacement filtre media of Iron Removal Plant (IRP) of 10K Gln/Hrs Capactiy, unserviceable strainers, packings and nuts/bolts/washers etc of IRPs and deposited to place where directed including cleaning the surfaces of IRP and all accessories with emery paper, preparing the surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer on outer surfaces and two coat of black bituminous paint on inner surfaces and connecting pipes as per colour codes and filling fresh filter media (i.e Faine sand, Trated sand, activated carbon, anthracite, Gravesl from 1/2 inch to 1 Inch) with replacement of unserviceable parts ect all as specified and directed. (Note : Replacing of filter media, valves, stainers and guages shall be measured and paid for separately under respective item of schedule)
M & L for servicing and replacement filtre media of Iron Removal Plant (IRP) of 5K Gln/Hrs Capactiy, unserviceable strainers, packings and nuts/bolts/washers etc of IRPs and deposited to place where directed including cleaning the surfaces of IRP and all accessories with emery paper, preparing the surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer on outer surfaces and two coat of black bituminous paint on inner surfaces and connecting pipes as per colour codes and filling fresh filter media (i.e Faine sand, Trated sand, activated carbon, anthracite, Gravesl from 1/2 inch to 1 Inch) with replacement of unserviceable parts ect all as specified and directed. (Note : Replacing of filter media, valves, stainers and guages shall be measured and paid for separately under respective item of schedule)
Replacement of barracker filter sand with complete all as specified and directed by Engr-In-charge.
Replacement of gravels of various sizes as per site requirement complet all as specified and directed by Engr-In-Charge
Replacement of Anthracite as per site requirement complet all as specified and directed by Engr-In-Charge
Replacement of Activated Carbon as per site requirement complet all as specified and directed by Engr-In-Charge
Supply & fixing Butterfly valve suitable for existing IRP of capacity 5K to 10K Gln/Hrs.
Providing and fixing G.I. pipes of 80 mm dia complete with G.I. fittings including trenching and refilling and takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge
Providing and fixing G.I. pipes of 50 mm dia complete with G.I. fittings including trenching and refilling and takingout of old unsv pipe with complete all as specified and directed by Engr-in-Charge
Providing and fixing gun metal gate valve of 80mm nominal bore with C.I. wheel of approved quality.
Providing and fixing gun metal gate valve of 50mm nominal bore with C.I. wheel of approved quality.
M&L for Decoupling pump from motor, taking out impellor, bush, bearing shaft, stuffing box, reassembling the same after replacing the defective parts & carrying out the necessary repair, remetalling, turning, polishing the pump shaft, replacement of steel studs and unserviceable nuts & bolt and testing complete all as directed for the following capacity of pump sets (Note replacing of ball bearing, impellor, stuffing box, etc shall be measured and paid for separately under respective item of schedule) (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
Material and labour for replacement of bronze impellor of existing size for the following capacity of centrifugal pump sets (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
Replacement of ball bearing of existing size suitable for the capacity of centrifugal pump sets :- (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
Material and labour for replacement of stainless steel shaft of pump set of following capacity. (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
Taking out old unserviceable stuffing box of pump and supply and fixing of stuffing box made of cast iron , along with Tee bolt, graphite gland packing etc complete all as directed for the following capacity of pumps :- (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
M&L for Decoupling pump & motor, opening the body of motor, taking out burnt/defective winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material, greasing varnishing the bearing including testing complete all as specified and as directed for the following capacity of motor :- (a) Above 20 HP and upto 30 HP
(b) Above 10 HP and upto 20 HP
(c) Above 5 HP and upto 10 HP
Material and labour for replacement of unserviceable pump/motor coupling of any size or shape with shaft bore of capacity 25 to 30 HP centrifugal pump set
Material and labour for replacement of unserviceable pump/motor coupling of any size or shape with shaft bore of capacity 7.5 to 15 HP centrifugal pump set
M & L for replacement of old/unserviceable foot valve with brass foot valve of size 100 mm dia confirming to IS-4038
-ditto- but of size 80 mm bore
Material and labour for taking out submersible pump set from bore well with the help of chain pulley and tripod , rewinding of burnt out motor with super quality copper winding wire of required gauge insulation with insulating material, drying, varnishing etc, replacement of bushes and re-assembling with pump, lowering in the same bore well and testing complete all as specified and directed for submersible pump set 10 HP/20 HP complete.
M&L for open well submersible pump opening the body of motor, taking out burnt/defective winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material, greasing varnishing the bearing including testing complete all as specified and as directed for the following capacity of motor :- (a) 5 HP to 10 HP capacity
Replacement of fountain lights (PC ABC Body) U Clamp LED 36Watts any colour WW, RGB as per site requirement complete all as specified and directed By Engr-In-Charge.
Replacement of fountain lights (PC ABC Body) Spot LED 18W any colour WW, RGB as per site requirement complete all as specified and directed By Engr-In-Charge.
Replacement of fountain lights (PC ABC Body) Nozzle mounted 18Watts any colour WW, RGB as per site requirement complete all as specified and directed By Engr-In-Charge.
Replacement of SMPS 200W with accessories complete all as specified and directed By Engr-In-Charge.
Replacement of RGB Controller with accessories complete all as specified and directed By Engr-In-Charge.
Washing and developing tube well by pumping with air compressor by vertical turbine pump until the water is sand and mud free with necessary arrangement for testing the yield with V Notch incl hire labour and fuel charges for all tolls and plants and scaffolding as required and testing of water bacteriologically and chemically etc all as directed by Eng-In-Charge
Supply & Fixing of automatic starter panel Star delta / DOL, 415V 3 Phase for 7.5/10 HP Motor with Ammeter, Voltmeter, MCBs, indicator lamps
SCHEDULE ‘A’ (SCHEDULE OF CREDIT)
Old unserviceable copper wire (Rate should be quoted Rs 350.00 per Kgs or more)
Old unserviceable GI pipe 80mm dia (Rate should be quoted Rs 65.00 per RM or more)
Old unserviceable GI pipe 50mm dia (Rate should be quoted Rs 25.00 per RM or more)
Old unserviceable gate valve any size (Rate should be quoted Rs 5.00 Each or more)
Old unserviceable light fitting of any size/capacity (Rate should be quoted Rs 5.00 Each or more)
B R Enterprise (BID ID -3291144)
M CHANDRAN PILLAI (BID ID -3291132)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .