SPECIAL REPAIR OF ROOF TREATMENT OF BLDG NO P-135, OLD HARD STANDING PLINTH AREA IN FRONT OF ALL MT GARRAGE AND SEWAGE PIPE LINE FROM BLDG NO P-146, P-147, P-148, P-153, P-155 AND P-215 UNDER GE (W) MATHURA

Amount

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, walls, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per Item No 1.00 (here-in-before) but exc. 1.5 M deep and n exc. 3 M deep.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement Mortar and removing rubbish n.exc. 50m complete all as specified and directed.

M&L for brick work built in cement mortar (1:4) with sub class 'B' bricks old size straight or curved on plan exc. 6m mean radius complete all as specified and directed.

Demolition and breaking up drain pipes, set in cement mortar 150mm internal dia (SGSW, AC or reinforced concrete) complete all as specified and directed.

Demolition and breaking up drain pipes, set in cement mortar 200mm internal dia (SGSW, AC or reinforced concrete) complete all as specified and directed.

M&L for concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed. Note :The thickness of concrete bed below the barrel of the pipe shall not be less than 100mm.

M&L for concrete bed to drain pipes 200mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed. Note :The thickness of concrete bed below the barrel of the pipe shall not be less than 150mm.

M&L for salt glazed stone ware drain pipe 150mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L for salt glazed stone ware drain pipe 200mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work/internal faces in man holes in CM (1:4) mixed with liquid water proofing compound @ 200ml by weight of cement per 50 Kg including finishing the surface even and smooth without using extra cement complete all as specified and directed. Note :Supply of WPC shall be measured and paid separately.

M&L for rendering 15mm thick on other than fair faces of brick work in CM (1:6) including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F 110mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type of pipe complete all as specified and directed.

S&F 75mm bore PVC SWR soil waste pipes single socketed in any length with rubber ring joint fixed to walls with clamp including dismantling of any type of pipe complete all as specified and directed.

S&F in repair 110mm bore PVC SWR bends of any radius with access door complete all as specified and directed.

S&F in repair 75mm bore PVC SWR bends of any radius with access door complete all as specified and directed.

S&F in repair 110mm bore SWR junction, single T equal or unequal with access door complete all as specified and directed.

S&F in repair 75mm bore SWR junction, single T equal or unequal with access door complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good for pipes and cutting out existing benching for and forming branch channels(1/2 round or ¾ section) in cement concrete (1:2:4), type B-1 smooth finished and forming benching as required for 200 mm dia SGSW pipe complete all as specified and directed.

M&L in repair SGSW gully traps square or round mouthed type P of size 150 x 100mm complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for Cement concrete (reinforced) complete all as specified and directed.

M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.

M&L for TMT bars 06mm to 08mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for construction of septic tanks for 50 users, excavation , in ordinary soil, complete all as specified and as shown in drawings. Note :-HQ CEJZ Drawing No TD/2002/S-2 Sheet 1/1)

M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i) Effective depth should be measured from inlet of pipe. (ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.)

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for 100 mm thick plain cement concrete type B-2, (1:2:4) using 40 mm graded stone aggregate as in floor or floor finishes complete all as specified and directed.

M&L forming contraction (Dummy) joint 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.

M&L for preparation of new surfaces of any discpription and applying two coat of exterior weather proof paint of Dark Shade, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of OBD over one coat of primer on walls complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for rendering dubbing coat over irregular surfaces of chajjas roof projections/ceiling/facia etc average 15mm thick in CM (1:4) over cement slurry coat @ 3Kg/Sqm making the surface even followed by 5mm thick rendering in CM (1:3) furnished even & smooth including making of drip course as required complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if required shall be deemed included in the unit rate quoted by the contrator.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed.

S&F GI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed.

Dismantling brick/concrete tiles any size etc complete all as specified and directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material to a distance exc 250m but n. exc 500m and deposited where directed at a level n.exe 1.5m above starting point complete all as specified and directed.

M&L for Providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate in coping, roof padding or roof kerb on roof chamfered complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer a@ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

M&L for preparation of old painted surface of any discpription and applying one coat of exterior weather proof paint of Dark Shade, complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.

Taking down eaves gutters and rain water pipes, soil waste and vent pipe ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning for refixing ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

M&L 100mm CI pipes soil, waste and vent pipe centrifugally cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.

S&F 100mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) without oval access door or without parallel branches complete all as specified and directed.

S&F 100mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) without oval access door or with parallel branches complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F 75mm CI pipes soil, waste and vent pipe centrifugally cast in any length with or without ears, with cement joints fixed to wall including applying a coat of black japaned paint on outer surface of pipes complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers without oval access door (larger bore measured) complete all as specified and directed.

S&F 75mm CI bends (any radius), diminishing pieces or tapers with oval access door (larger bore measured) complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door or with parallel branches complete all as specified and directed.

S&F 75mm CI Branch pieces, single T (equal or unequal), ordinary or inverted (spigot or socket type) without oval access dooror with parallel branches complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28-30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and as directed.

S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.

S&F 150mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F powder coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys in each opening and 01 No hydraluic door spring etc including taking down old aluminium shutter with chowkhat complete all as specified and directed. (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc

S&F Factory made steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.

S&F steel ventilators with centre hung shutters including hinges with steel handle & steel peg stay complete all as specified and directed.

S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib tap cast copper alloy fancy type (min weight 400 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

S&F in repair 15mm bore CP pillar taps Fancy type cast copper alloy along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.

S&F in repair CP angle / stop cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 2 way 15mm bib cock standard of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 90 gms) complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm with and waste fitting of PTMT, PVC connection and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed.

S&F in repair CP Jet spary butter fly design fixed on EWC with stanless screw as approve complete all as specified and directed.

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement; fixing discharge pipe, flush pipe, grating and union for discharge, complete all as specified and directed.

S&F in repair PVC mirror cabinet size 300X450mm of standard size fixed to wall with PVC sleeves and steel screws complete all as specified and directed.

S&F in repair Glass shelf 450mm longX100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair vitreous china was down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified & directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed.

Dismantiling floor, hearth or wall tiling including cement motar bedding (but not backing) removing serviceable tiles to store and rubbish off the premishes complete all as specified and directed.

M&L for glazed ceramic tiles 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over 10mm thick plastering in CM (1:4) complete all as specified and as directed

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position such as RCC fins,Chajjas etc (reinforcement cut as required to facilitate demolition) including making good using in CM (1:4) plaster to make the match with existing surface complete all as specified and directed.

M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed.

ARCHI ENGINEERS

M/S MRS BHASKAR

VANI CONSTRUCTION

Ahmed constructions

MISHRA CONSTRUCTIONS

M/s Hoti Lal Contractor

Deepak Saxena

SHAKSHI ENTERPRISES