CERTAIN SPECIAL REPAIR, REVENUE WORK, MINOR WORK AND LBW WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and directed.

Taking down door and Refixing shutters after making necessary repair of any description exc.1 Sqm but n.exc. 2 Sqm each complete all as specified and directed.

S & F Pressed steel frames made of 1.25 mm thick MS sheet of profile 125X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts/lugs etc complete all as specified and directed.

S & F Pressed steel frames made of 1.25 mm thick MS sheet of profile 105X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts/lugs etc complete all as specified and directed.

S & F Cement concrete (1:3:6), type C-0 using 12.5 mm graded stone aggregate as in filling of chowkhats, hold fast blocks etc including necessary form work complete all as specified and directed.

S&F 35mm thick 2nd class hardwood plain framed panneled factory made shutters ( two panels) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veeneering on both faces fitted to cowkhats complete all as specified and directed.

S&F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24(a) complete all as specified and directed.

S&F 30 mm thick PVC factory made panel door shutter(style) consisting of frame made out of MS tubes for top & bottom rail, MS Frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thickX15 mm wide PVC Sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheeet beading as in toilet/kitchen cabinate Shutters Make Rajshree/Sintex or equivelent complete all as specified and directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube ccomplete all as specified and directed.

S&F Box type steel windows/ventilator comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately)with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos MS Tower bolts 150 mm long for each leaf and 08 mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work ,including other fittings ,hinges ,MS handles , tarred hold fasts , PCC blocks for hold fasts , and AC opening if required incl two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. .

S & F Mild Steel powder coated colour decorative type drapery rod of 20mm dia approved pattern & design including decorative knobs (02xNo for each opening) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and directed.

Description all as per ser item No 15 here in before but figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including necessary nuts and bolts complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked) complete all as specified and directed.

S&F 100mm long butt hinges, medium weight cold rolled mild steel (ISI Marked) all as specified complete all as specified and directed.

S&F 140mm size (overall length of cover plate) floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Mild steel 300mm rat rail spring including roller plate complete all as specified and directed.

S&F 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised (ISI Marked) complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink wood primer complete all as specified and directed.

Preparation of old wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

Supply and fixing prelaminated particle board, 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination incl fixing of TW beading on open edges of particle board complete all as specified and directed.

S & F hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down cement plaster/wall tiles from concrete/stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement (external plaster) with WPC complete all as specified and directed. Note : WPC shall be paid separately.

M&L for 10 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L two coats of oil bound distemper on new surfaces including preparation of surfaces of walls including one coat of chalk whiting complete all as specified and directed.

Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper over a coat of wall putty whereever necessary complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceillings complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plaster surfaces of wall, soffits/facia etc and applying two coat of exterior emulsion paint over a coat of wall care putty complete all as specified and directed.

Preparation of old decorated surfaces of walls, soffits/facia of chajja/roof slab etc and applying one coat of exterior emulsion paint over a coat of wall care putty complete all as specified and directed.

M&L Preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S & F coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and directed.

S & F coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement ot match over & including10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and directed.

Re-fixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and directed.

S&F in repair angle valves CP screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed

S&F in repairs vitreous china squatting pan, 'Orrissa ' pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete beding, including connection to P or S trap, and to flushing pipe, anti-syphonage pipe, etc including maing good to floors complete all as specified and directed

S&F in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, incl brackets, 15mm PVC connection 600mm long, and 32mm dia PVC flushing pipe including fixing of long screw chromium plated complete all as specified and directed

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S & F in repair wash hand basin 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore, complete all as specified and directed

S&F in repairs 15mm bore pillar cocks chromium plated ,screwed for 15 mm bore of iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair stop valves CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed

S&F in repair CP shower rose wih swivel joints brass chromium plated 125 mm size, including fixing to steel pipe or union complete all as specified and directed

S & F in repairs CP brass towel rail fancy type 600mm long fixed with CP brass screw complete all as specified and directed

S&F in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary checknuts & washer and 20 mm dia PTMT ball valve complete all as specified and directed

S&F in repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and directed

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair bib taps, long body, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed

Dismantling of 75 mm and100mm dia PVC/cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and directed

S&F PVC (SWR) pipe 100mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F PVC (SWR) pipe 75mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F PVC (SWR) pipe 50mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floor or fixed to walls complete all as specified and directed

S&F 100mm bore sand cast iron pipe, waste and vent pipe in length with or without ears , with cement joints complete all as specified and directed

S&F 75mm bore sand cast iron pipe, waste and vent pipe in length with or without ears , with cement joints complete all as specified and directed

M&L cast iron bends (any radius) ,diminishing pieces or tappers of pipe 100mm bore complete all as specified and directed

M&L cast iron bends (any radius) ,diminishing pieces or tappers of pipe 75mm bore complete all as specified and directed

M&L PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 100mm bore complete all as specified and directed

M&L PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 75mm bore complete all as specified and directed

S & F in repair 100mm PVC (SWR) bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and directed

Demolition brickwork built in cement mortar or cement lime mortar complete all as specified and directed

Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, concrete shall be laid in alternate bays n.exc. 3m in length, finished fair and even complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) and removing from site complete all as specified and directed

M& L PVC (SWR) floor floor trap with steel grating including jointing to waste pipe fixed in cement concrete type BI (1:2:4) dia of outlet in 100mm complete all as specified and directed

M&L for PVC cowls for 75 mm bore of pipe complete all as specified and directed

M & L for PVC (SWR) floor trap 63mm dia for WHB, including 40mm dia HDPE pipe upto the trap of bath room and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and directed

S & F PVC (SWR ) pipes,110 mm bore, single socketed,in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut & bolts incl taking down of pipe complete all as specified and directed

S & F PVC (SWR ) bend/shoe,110 mm bore, , fixed to pipes complete including fixing clamps etc with nut & bolts complete all as specified and directed

M & L cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm thick in floors, roof etc complete all as specified and directed

Supply only integral water proofing compound.

M & L Cement concrete 1:5:10 (40 mm size coarse agg) as in mass filling in sunken floor of toilets complete all as specified and directed

Rendering 15mm thick in cement sand mortar 1:4 mixed with & including liquid integral water proofing compound 0.20 Ltr per 50 kg bag of cement both on floor and wall after proper curing and drying and apply Epoxy resins coating polymer modified cementation coating like brush bond of Fosroc Pedilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and directed

Removing existing treatment from roof surfaces such as tiling, fungs moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and directed

M&L for Rendering 20 mm thick in CM 1:4 on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and directed ( Note- liquid water proofing compound shall be measured and paid seperately.)

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 lit/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying two coat of aluminium paint, complete all as specified and directed.

S&F in repair Chromium Plated Peg Set 175mm to 250mm fixing with wall complete all as specified and directed

S&F in repairs soap shelf, PVC white/colour appx size 450x125x40 mm as per sample complete all as specified and directed

Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed

Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filing and mass concrete complete all as specified and directed

Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces of concrete etc complete all as specified and directed

M&L for RCC M-25 design mix with using 20mm graded stone agg as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Formwork to sides of rough finished flat surfaces of concrete pillars, posts, struts, piers, columns, and stanchions fair finished surfaces of concrete in square, rectangular etc complete all as specified and directed

M&L for RCC M-25 design mix with using 20mm graded stone agg as in columns, pillars, piers, posts and struts complete all as specified and directed

Formwork to sides and soffits of rough finish surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc complete all as specified and directed

M&L for RCC M-25 design mix with using 20mm graded stone agg as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) Fair Finished Surfaces complete all as specified and directed

M&L for RCC M-25 design mix with using 20mm graded stone agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed

M&L 5 mm dia and over upto 10 mm dia , cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M/L including preparation of new plastered surfaces and applying Two Cement base paint over a coat of primer complete all as specified and directed

M&L for Rendering 10mm thick on fair faces of brick work or concrete internal surfaces in CM 1:6 complete all as specified and directed

M&L for Rendering 5mm thick ceiling plaster in CM 1:3 complete all as specified and directed

M&L for PCC sub base type C2 1:3:6 using 40 mm graded stone aggregates complete all as specified and directed

M&L Non skid / mat finish ceramic colour joint free tiles 7 to 8mm thick (Square/Rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete complete all as specified and directed

S&F vitreous China wash down water closet pan pedestal pattern Water Closet, ( excluding flushing cistern and flush pipe) , including fixing bolts, connection to drain ( or outgoing pipe) and to flushing pipe , etc, and fixing of seat cover complete all as specified and directed

S&F 10 litre capacity Low level flushing cistern, with inlet float valve, moulded from virgin poly propylene Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked complete all as specified and directed

S&F Vitreous china wash hand basin white ,oval shape of size 580x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends brackets and provision of GI waste pipe 32mm (Light grade) of adequate size and length , brass chromium plated waste coupling 32 mm dia, cast copper alloy chromium plated angle valve 15 mm dia bore,15mm dia CP pillar tap fixing complete all as specified and directed

S&F vitreous china urinals,half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, PTMT waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed

S & F Sheet glass shelf assembly consisting of guard rails and bracket 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with Aluminium ally complete all as specified and directed

S&F tubler towel rail,20mm dia,D type and 60cm long between flanges of Brass chtomium plated complete all as specified and directed

M&L for Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws box type complete all as specified and directed

M&L for stainless Steel Jet Spray complete all as specified and directed

S&F cast iron 100 mm dia bore pipe, branch pieces,single (equal or unequal),ordinary or inverted(spigot or socket type) or with parallel branches complete all as specified and directed

S & F CP grating doom 100mm dia including embedding in tiles with white cement complete all as specified and directed (Minimum weight 25 gms )

S & F Stop valves cast copper alloy 15 mm dia, fancy type,chromium plated with long shank and cup (concealed type) screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR 2010 part-II on page 156 complete all as specified and directed

M&L for Septic Tank 10 users. Single chamber (brick construction) with top of slab at ground level incl necessary excavation and earth work in any type of soil and disposed of surplus soil to a distance not exc 50 m vent pipe and fixing of manholes cover with angle iron welded framecomplete all as specified and directed and shown on drgs No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013

Soakage well 3.00 metre dia and 4.50 metre deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover fixed in angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance exceeding n. exc. 50m complete all as specified and directed in drgs No CEPZ/C-TD/013/13 sheet No 1/5 to 5/5 dated 11 Sep 2013

S&F of 200 mm dia Reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified and directed

S&F MS Peg set 45cm long and 50mm wide with five aluminium hooks complete all as specified and directed

S& F 1000 ltrs PVC Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and getting out in soft/loose soil complete all as specified and directed

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L for 100 mm thick Plain Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and directed

M & L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-25 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for Providing, cement concrete type B, 1:2:4 (20 graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

S&F stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and directed

S & F stainless steel plate rack 1.25mm thick of size 900x775x250mm including angle iron brackets and taking down of 19mm thick particle board shelf & removal from site complete all as specified and directed

S&F bib taps, fancy type Chromium Plated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed

E/M Portion: - Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 3 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length incl taking down old wiring complete all as specified and directed Note : Wiring shall be done in proper colour coding.

M&L for Point wiring One light point or One fan point controlled by one switch complete with 1.50 sqmm copper conductor multistrand pvc insulated FRLS and unsheathed cable in existing or new pvc rigid concealed conduit with New cast iron/pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continous pvc insulated multistrand copper wire 1.50 sqmm dia FRLS PVC insulated complete all as specified and directed

Description all as per serial item No 139 above but for multi 5 pin 5 amp socket outlet on same board complete all as specified and directed

Description all as per serial item No 139 above but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and directed

Description all as per serial item No 139 above but for One light point controlled by two 2 way switches, with cable 1.5 sq. mm complete all as specified and directed

Description all as per serial item No 139 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size complete all as specified and directed

M & L for point wiring for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLS pvc insulated in green color complete with new CI/pressed steel sunken black with Modular plate top shee cover complete all as specified and directed

S&F in replacement of Modular switch 1 way 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement of Modular switch 2 way 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement of Modular bell push 6A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement of ceiling rose, 3 Phase/PVC/polycarbonate isolated body complete all as specified and directed

S&F in replacement of Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F in replacement of Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed

S&F in replacement of Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and directed

S&F in replacement of Modular Fan step regulator, 120W 1 module , 240 volts ISI marked complete all as specified and directed

M& L in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

S&F in replacement of Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed

S&F in replacement of Vertical Distribution Board (V.TP&N) 12 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and out going 12 Nos MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar complete all as specified and directed Note:- (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) Rate includes MCB SP 40 Amps 12 Nos 10 KA. DB 63/32 Amps (iii) V TPN DB,MCB and MCCB should be of same make.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed Note:- Distribution board and MCBs should be same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Taking down existing serviceable/unsv after repair replacement of MCB TPN box incl replacement of PVC flexible coduit for cable protection complete with making the existing wall neat and clean incl patch work,plaster,brick work and white wash as per site requrement complete all as specified and directed

M&L in repair for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed

S&F for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

S&F Self ballast LED retrofit Lamp with PVC body and PC Diffuser 5 watt 230 Volt 6500K complete all as specified and directed

S&F LED lights fitting 1x 18W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 18 watt, 230 Volts 50 Hz. complete all as specified and directed

S&F Modular switch 1 way 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F ceiling rose, 3 Phase/PVC/polycarbonate isolated body complete all as specified and directed

S&F Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed

Supply and fix distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 AMP Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing exhaust fan ,steel body AC single phase ,230V of size 300mm/400mm sweep with blades and frame and louvers, incl making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls including plastering for making good to the original surfaces complete all as specified and directed

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and Fix , XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete all as specified and directed

Supply and Fix , Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia bore complete all as specified and directed

Supply and Fix , Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm dia bore complete all as specified and directed

Supply and fix , GI Tubes, 'medium grade', galvanised, with all fitting; laid in trenches, of bore size 25 mm complete all as specified and directed

Supply and fix, GI Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, of bore size 20mm complete all as specified and directed

Supply and fix electric water heater Geyser,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece & with hot and cold pvc (SWR ) pipes any length with rubber ring joints fixed to walls & Etc complete all as specified and directed

M&L switch socket combination 3 pin 16 Amp flush type complete all as specified and directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed

Supply and fix electric water heater Geyser,storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece & with hot and cold pvc (SWR ) pipes any length with rubber ring joints fixed to walls & Etc complete all as specified and directed

M&L for Sub main wiring with proper colour coding ,insulated , unsheathed,multistranded ,copper conductor FRLS, cable of 3 run 4 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured complete all as specified and directed Note : Wiring shall be done in proper colour coding.

M&L for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 1 way 240 volts double door complete all as specified and directed Note:- Distribution board and MCBs should be same make.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S Sukhmani Construction Co.