RENOVATION OF D-TYPE (D-2 BLOCK) QUARTER ONE BLOCK 6.0 UNIT NEAR RAJA TALAB KODERMA

Providing coarse cleaan sand filling in foundation trench do-----do all comp job.

Providing 75A Brick work (1:6) in Foundation and plinth do-----do all comp job.

Centering and shuttering including including struting,propping etc and removal of form for Lintel,Beams do---do all comp job.

Providing 1.5 mm thick cement punning do--do all comp job.

Making soak pir 2.5 M dia and 3.0 M Deep do----- do all comp job.

supplying material labour for construction of inspection chamber do-----do all comp job.

Supplying and fixing hume pipes do----do all comp job.150 mm dia

Providing 250 mm wide brick drain do-----do all comp job.

Dismantling of old plaster do---do all comp job.

Providing 12 mm thick C.P( 1:6) do----do all comp job

Providing 6mm thick cement plaster (1:4) in ceiling do----do all comp job.

Finishing wall with acrylic smooth exterior paintover new surface do---do all comp job.

Finishing wall with A.S.E paint over old surface of required shade do---- do all com job.

Providing two coats oil bound distemper over new surface do----do all comp job.

Providing two coats oil bound distemper over old surface do----do all comp job.

Taking Down old Door and Windows Shutter do----do all comp job.

Taking Down old Door Chaukhat do----do all comp job.

Supplying fitting and fixing 30 mm thick non decorative single leaf flush door shutter do---do all com job.

Supplying fitting and fixing of glass panes including Supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all completee as per building specification and direction of E/I.

Supplying fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of E/I. Butt Hinge- 100mm

Butt Hinge- 75mm

Tower bolt -150mm

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as sp

Providing and fixing Aluminium Work do-------do all comp job.

Providing and fixing Aluminium Work For frame do-------do all comp job.

Supplying and fixing of ACP Sheet do----do all comp job.

Supplying fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of E/I. Butt Hinge- 75mm

Tower bolt -100mm

Supplying fitting and fixing of M.S grill do---do all comp job

Supplying fitting and fixing fully glazed steel windows do---do all comp job.

Easing and adjusting door shutter do----do all com job.

Providing Two coats S .E paints over new wooden surface do ---do all com job.

Providing Two coats S .E paints over old wooden surface do ---do all com job.

Providing Two Coats Ready Mixed Paints over old steel surface do----do all comp job.

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portion do ----do all com job.

Dismantling of PCC work do---do all comp job.

Providing and laying ceramic glazed floor tiles do----do all com job.

Providing and laying 6mm precast white glazed tiles in wall do ---do all com job.

Providing and laying 3 mm thick APP water proof membrane with oil based primer and pasting charge do----do all comp job.

Cairrage of materials Sand with lead 13 km

S/C with lead 8 km

Bricks with lead 25 km

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing PCC M-200(1:1.5:3) in foundation and plinth do----do all comp job.

Providing R.C.C M-200(1:1.5:3) in chajja ,Lintel do----do all comp job.

Providing Tor Steel Reinforcement of Following Dia do-----do all comp job. 8 mm dia

10mm dia

Centering and Shuttering includingg Struting,Propping etc. and removal of form for- Foundation ,footings bases of column etc.

Centering and Shuttering in Suspended floor , roof, Landing,balconis etc do--do all comp job.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complet

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Supplying fitting and fixing 20guage G.C.I sheet gate fitted on M.S Angle frame of size 60x60x6mm ,including cost of fabrication ,providing necessar looking arrangement with haskal and dommy duly fixed in P.C.C (1:2:4) block of required size ,applying a priming red lead paints over steel work taxes all complete as per drawing specificatio and direction of E/I.

Providing 75B one brick flat soling do----do all comp job.

Providing & Applying of 1mm thick cement based putty do----do--- all comp job.

SANITARY AND WATER SUPPLY Supply fitting and fixing of viterous white glazed I.W.C pan do-------do all com job. 580mm long

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : E.W.C. pan with ISI marked white solid plastic seat and lid

S/F/F of viterous white glazed hand wash basin do---all com job.

Providing and fixing CPVC pipes of following size do ----do all com job. 15mm

Providing and fixing PVC pipes of following size do ----do all com job. 75mm

Providing and fixing PVC pipes fittings of following size do ----do all com job.Bend 75mm

coupler 75mm

clip 110mm

Providing and fixing following bath room fittings do-----do all ccom job. Bib cock

Bib cock (Long thread)

Angular stop cock

Concealed stop Cock

Towel Rail 24''

Towel Rings

Toilet Paper Holder

Mirror

Glass Self 22''

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 610x510 mm bowl depth 200 mm

ELECTRICAL WORK Wiring for light point / exhaust fan point / call bell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper cinductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required.

S/F Modullar type switch / socket :- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections as required. 5/6 amps , 3 pin socket outlet

5/6 amps, one way switch

Circuit / submain Wiring in PVC conduit :- Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x1.5 sq mm+1x1.5 sq mm earth wire

2x2.5 sq mm+1x2.5 sq mm earth wire

S/F Modullar type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulatar on the existing modular plate and switch box including connections as required.

S/F Ceilling rose Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required.

S/F batten holder Supplying and fixing batten /angle holder including connection etc as required.

S/F/F ceiling fan baja CG any other approved makes as required.

ITC ceilling fan :- Installation testing and commissioning of of Ceilling fan including wiring the down rods of standard length (upto 30 cm ) with 1.5sq mm FR PVC insulated copper conductor single core cable etc.as required.

S/F S.P.MCB DB :- Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job 6 Way Single door

S/F "B" series, S.P MCB :- Supplying & fixing 6amps to 32 amps rating 240 volts "B" series miniature circuit breaker suitable for lighting and other loads of folloing poles in the existing MCBDBcomplete with connectiontesting and commissioning etc. 6/32 amps, single pole,"B" series

S/F DPMCB isolator :- Supplying & fixing following rating double pole 240 volts in the existing MCBDB complete with connection testing and commissioning etc.(40 amps)

S/F rewireable pole / TP&N switch disconnector :-Providing and fixing following capacity double pole / TP/N sheet matal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in matel board making connection etc.32 amps , double pole

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50H2, single phase supply etc. complete as required :20/22W LED Tube light

S/F/F 15/16 watt LED Bulb with complete job

S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required 90/100W LED Street light

Add 18 % GST (in Basic Rate must fill 18)

Add 1% Labour Cess (in Basic Rate must fill 1)

Please Enable Macros to View BoQ information