Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical PLOT NO 48 49 50 SANCOALE INDL ESTATE SANCOALE GOA | SANCOALE | GOA | Accepted-Technical Qualified |
| 2 | Accepted-Technical L 411 HOUSING BOARD COLONY DAVORLIM NAVELIM SALCETE GOA | SOUTH GOA | GOA | 403103 | Accepted-Technical Qualified |
Tender Value
₹21.5 L
EMD Value
₹42,979
Closing Date
17 Jul 2026, 4:00 pmClosed
Executive Engineer
Office of Executive Engineer, Div IV, PWD Tonca
Additional electrical wiring along with area lighting at Shri Ajoba temple in Poriem constituency under MLA-LAD Scheme.
2026_PWD_30234_1
31/1/2026-27/ASW-IV/EMN/PWD/17 LINE01
Open Tender
Electrical Works
Percentage
30 days
Tonca Caranzalem
Please refer to tender notice
3 documents required · 3 mandatory
₹5,000
₹42,979
20 Jul 2026
10 Jul 2026
20 Jul 2026
10 Jul 2026
17 Jul 2026
10 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying and fixing of LED Bollard light fitting 500 mm height ,10W , mild steel body 3000K /600 CCT,along with its accessories and fittments including bulb, pc diffuser etc. ip 65 protected, as required of make vibgyor model no. B10815(A) or equivalent in iso certified brands such as bajaj,havells, jaquar, halonix etc. to be approved by Engineer in charge. | 50 | Nos. | 4,662 | ₹2,33,100 |
| 2 | SITC of LED Silicon Profile lights ,10mm x 10mm, as required of make vibgyor or equivalent in any iso certified brands etc. to be approved by Engineer in charge. | 1,350 | Metre | 887 | ₹11,97,450 |
| 3 | Supply and fixing of Accessories for Profile lights such as clamps, end caps etc. of suitable make as required and to be approved by Engineer in charge. | 1 | Set | 17,697 | ₹17,697 |
| 4 | SITC of LED Power Supply Units of 24v-10A range, size 212mmx62mmx32mm for Silicon Profile lights as required of standard make etc. to be approved by Engineer in charge. | 55 | Nos. | 3,148 | ₹1,73,140 |
| 5 | Supplying and fixing of LED Spike Light of 12 watts , beam angle of 36W, 3000K CCT,along with its accessories and fittments including bulb, pc diffuser etc. ip 65 protected, dimensions as required of make Lafit model Liviana cat. no. LFSP015-12W or equivalent in iso certified brands such as bajaj,havells, jaquar, halonix etc. to be approved by Engineer in charge. | 4 | Nos. | 2,206 | ₹8,824 |
| 6 | Supplying and fixing of LED Spot Light of 6 watts, 3000K CCT,along with its accessories and fittments including bulb, pc diffuser etc. ip 65 protected, as required of make Lafit model glare cat. no. LFSP136-6W or equivalent in iso certified brands such as bajaj,havells, jaquar, halonix etc. to be approved by Engineer in charge. | 6 | Nos. | 2,116 | ₹12,696 |
| 7 | Supplying and fixing of LED bar Light of 30 watts,along with its accessories and fittments, as required of make Lafit model cat. no. LLA 103, or equivalent in any iso certified brands etc. to be approved by Engineer in charge. | 4 | Nos. | 10,530 | ₹42,120 |
| 8 | Supplying and fixing of LED bulbs of 9/10 watts as required of make bajaj, havells or equivalent in any iso certified brands etc. to be approved by Engineer in charge. | 75 | Nos. | 238 | ₹17,850 |
| 9 | S.I.T.C of LED Flood light Fixture 50W or above along with its accessories and fittment / mounting the same as per required site conditions with proper finishing etc, of make havells model JETALEGANZAFLS50WLED730P60DTOTG, HSN code 9405 / Crompton Model CFS-504-50-57-60D-SL-GL-NSG / Bajaj Model GLATT MT 60L WH PO PC SD or Equivalent in recognised / ISO certified brands only & to be approved by Engineer in charge. | 18 | Nos. | 6,038 | ₹1,08,684 |
| 10 | Supplying and fixing DK thermoplastic Cable Junction Boxes130 x 130 x 77mm IP 66/69 weather proof for outdoor installation (with knockouts for cable entry) including connections etc & inbuilt 4 way stud type connectors of make Hensel cat no. DK 0604 G / spelberg and fixing of 32 mm dia Gi pipe including, clamps nut bolts, cement, sand, excavation for mounting etc. as required. | 45 | Nos. | 1,215 | ₹54,675 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tendernotice_2.pdf
PDF • 7.69 MB
BOQ_30649.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .