Term Contract for installation of road gantries, unipoles etc on major roads for road signages, Delhi Cantt.

Amount

Excavating over areas not exceeding 1.5m deep and getting out in any type of soil complete as specified and directed by Engineer-in-charge.

Excavating over areas exceeding 1.5m deep upto 3 mt deep and getting out in any type of soil complete as specified and directed by Engineer-in-charge.

M/L Mild Steel TMT bars 8 mm dia (Fe-500) and over cut to length and bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding, with and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips quality confirming to Fe – 410 S or Fe-410-O complete all as directed & specified by the Engineer-in-charge

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soflits of foundation and plinth beams etc for fair finished surface.

Providing and laying Reinforced Cement Concrete in foundations including rafts,footings, foundation , plinth bearms, bases of cloumn etc using M-25 design mix concrete.

Providing and laying cement concrete in foundations, filling and mass-concrete and like, type D-2, 1 : 4 : 8 mix (1 cement :4 coarse sand : 8, 40 mm graded stone aggregate).

M/L Mild Steel bolts, purpose made of any dia & size, hexagonal, square or round or plain head screwed at one end, J bolts, Anchor bolts of any description provided with washers for fastening MS tubular structures and like complete as specified/ directed by Engineer-in-charge.

Supplying, fabrication and installation of MS work in tubular gantries as per desired structure, firmly fixed to the ground by means of properly designed foundation with cement concrete. Installation work shall be as per relevant clauses of MORT & H. Specifications : Section 800 & IRC : 67 :2012 complete in all respect. The rates shall include cost of design fabrication, supply, transportation, local shifting, erection of signage structure using crane. All T&P machine, material & labour required for proper completion of work as per the direction of Engineer-in-charge. The MS tubular work shall be painted with epoxy and minimum two coats of synthetic enamel paint as approved by the Engineer-in-charge. Note : The agency shall be required to undertake barricading, provide caution sign boards etc for traffic control/ diversions while erection work to prevent any accident. The agency shall keep Cantonment Board Delhi indemnified against any loss due to any accident, injury or untoward incident while erection works.

Provisioning and Erection at site, Retro Reflective Over Head Gantry Signage board of any size made out of Type - XI Micro Prismatic Type sheeting conforming to IRC: 67:2012 & ASTM D 4956-09, and matter printed with 3M - HP latex printing technology with low VOC emissions ink as per the display matter given by the Engineer-in-charge, fixed over 4 mm thick aluminum composite panel and riveted using 6 mm aluminium rivets to back support frame supported on MS Tubular gantry structures firmly as specified including all T&P, machinary required for erection as per direction given by Engineer-in-Charge. NOTE : (1) A certificate of having tested the sheeting for following properties and its having passed these tests shall be obtained from approved Govt. laboratory Institute, by the manufacturer of the sheeting: (i) Coefficient of Retro Reflection (ii) Day time color & luminance (iii) 3 years outdoor weathering (iv) Shrinkage (v) Flexibility (vi) Liner Removal (vii) Adhesion (viii) Impact resistance (ix) Specular gloss (x) Fungus Resistance. Above test reports be furnished by the agency alongwith claim of his bills. (2) The agency shall be required to undertake barricading, provide caution sign boards etc for traffic control/ diversions while erection work to prevent any accident. The agency shall keep Cantonment Board Delhi indemnified against any loss due to any accident, injury or untoward incident while erection works. (3) After completion of work the contractor shall submit warranty certificate (10 years for Type XI) in original for completion of installation of signboards as per requirement of IRC 67:2012. (4) The bidder shall also submit a declaration from the manufacturer of retro reflective sheeting that the inks used for printing shall be certificated for low volatile organic compound (VOC) emission conforming to UL 2801 standards (Standard for Sustainability of printing inks). Particular specifications in this regards be read carefully.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm all as directed by Engineer-in-Charge.

Removing surplus/ excavated materials & disposal outside Cantonment limits under contractor own arrangements as directed by Engineer-in-charge.

AMIT ASSOCIATES

CBM Industrie Ltd.