Providing and fixing chain link fencing of Nangal Hydel Channel from RD 95000 to RD 97500 left side and RD 101000 to RD 102200 left side of Nangal Hydel Channel.

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation, and subsequent filling around masonry in 15 cm layer with compaction including disposal of all surplus soil as directed with in a lead of 30 meter. [ As per CSR-2020 item No. 6.6]

Cement Concrete 1:6:12 with Stone aggregate 40 mm gauge mixing by mechanical means using concrete mixer volumetric type.[ As per CSR-2020 item No. 10.8-b-ii ]

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) [ As per CSR-2020 item No. 9.1]

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type.[ As per CSR-2020 item No. 10.13-a-ii]

Boulder masonry in cement mortar 1:6 in foundation and plinth. [ As per CSR-2020 item No.12.33]

Cement pointing 1:2 (Flash) on stone walls[ As per CSR-2020 item No.15.63]

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Tees angles & channels[ As per CSR-2020 item No.18.1-c ]

Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position For roof trusses, well curbs, plates and trussed girders, etc. of any span for buildings and bridges up to 15 m span. (Through Rate)[ As per CSR-2020 item No. 18.3]

Providing and fixing G.I chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 4 mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer- in-charge. (AOR)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.[ As per CSR-2020 item No. 16.20]

Painting two or more coats with aluminum paint to give an even shade excluding priming coat [ As per CSR-2020 item No. 16.25]