Repairing and Resuming of Major breakdown of 1 no of 75 KVA Genset at 76 TNGRHS

Amount

Engine self-starter and bendex drive removed from Engine. Overhauling the self starter and pendex drive, both are assembled with new bearings bushes and corbon brush with springs, self starter fitted with engine.

Battery Charging Dynamo removed from Engine. Dynamo over hauling and assembled with new bearings, bushes and new corbon brush with tension springs. Dynamo fitted with Engine.

Engine cooling water circulation, water pump removed from Engine water pump overhauled with new bearings, bushes shaft and mechanical seal, water pump fixed with engine new gas cuts and guide bushes

Engine fuel pump and Injector removed from Engine fuel pumps and injector calibrated at Micro service station defective injector replaced by new Injector, Injector assembled with Engine, using new Copper washers and "O" ring.

Old Lubricating Oil derived from Engine sump. Sump removed from Engine. Sump and crankcase cleaned completed. Sump assembled with sump new gascut. Supply and filling of servo pride 20 W 40 Engine Oil filled in crankcase upto max. level. Approx. 30 Lts. Supply and fixing of micro make lub oil filter fitted with new "O" rings and copper washers.

Supply and fixing of Micro make diesel primary filter one No. and secondary filter One No. replaced by new fitter with new copper washers and "O" Rings.

Air Filter Servicing mesh. replacing by new spare. Oil bath air cleaner oil filled upto max. level.

Supply fabricating and fixing of 24V - 10AH battery charger in panel board. Outgoing cables connector with 12V x 2 Nos. battery.

Engine panel board wiring properly. Necessary parameter fitting and engin starting key provided at engine panel board.

Supply and fixing a AVR (Auto voltage regulator) Make - Kirloskar model - TAVR - 26 fitted with 75 KVA Alternator.

Inlet manifold and exhaust manifold disconnected. Turbo charge removed from engine. Turbocharger Overhauled with new bearing and mechanical seals. Turbocharger fitted with engine.

Engine, contaminated cooling water (old) completely drained from Engine and flush out, fresh RO water filled upto max. Level.

Main panel board wiring completely replaced. New Parameters like. A.C. Volt. meter, Ammeter, Frequency meter, D.C. Volt Meter, new MCB and switches and indicators etc. provided.

Supply, fabricating and fixing of new Load out going change over switch (E.B. & generator)

Supply and fixing of 35mm multi stands pure copper heavy duty PVC insulated cable 6 meters and 6 nos. solid bross clamps and terminals and soldering. Fitted from battery to self starter. Via ignition key.

Supply fixing and testing of Two nos. 12V - 200 AH, Exide make, express model - battery fixed

Sub Total

GST at 18%

SRI VENKATESWARA ENTERPRISES (BID ID -1362450)