ADDITION/ALTERATION OF CERTAIN BUILDINGS OF LOGISTIC SECTION AT AF STN AGRA

Amount

SCHEDULE A PART I (BUILDING WORKS)

Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part I .

Sch A Part II (INTERNAL WATER SUPPLY)

Lump sum price worked out by the contractor for Internal Water Supply as listed in Sch ‘A’ Part II.

Sch A Part III (INTERNAL ELECTRIFICATION)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION" as listed in SCHEDULE ‘A’ PART- III .

Sch A Part IV( EXTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION, as listed in Sch ‘A’ Part-IV.

Sch A Part V (Lightening Protection)

Lump sum price worked out by the contractor for Lightening Protection,as listed in Sch ‘A’ Part- V.

Sch A Part VI (ROAD/PATH & HARD STANDING)

Lump sum price worked out by the contractor for ROAD/PATH & HARD STANDING,as listed in Sch ‘A’ Part- VI.

Sch A Part VII (SEWAGE DISPOSAL)

Lump sum price worked out by the contractor for SEWAGE DISPOSAL,as listed in Sch ‘A’ Part- VII.

Sch A Part VIII (FENCING AND GATE)

Lump sum price worked out by the contractor for FENCING AND GATE,as listed in Sch ‘A’ Part- VIII.

Sch A Part IX (Site Clearance, excavation and Earth work)

Lump sum price worked out by the contractor for Site Clearance, excavation and Earth work,as listed in Sch ‘A’ Part- IX.

Sch A Part X (Miscellaneous Items of B/R and E/M)

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) including removal of demolished materials outside of MD land distance exceeding 7 Km but not exceeding 12 Km complete all as directed by Engineer-In-Charge..

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for including removal of demolished materials outside of MD land distance exceeding 7 Km but not exceeding 12 Km complete all as directed by Engineer-In-Charge.

Dismantling of Asbestos cement sheeting (corrugated /semi corrugated) inroof covering including ridge all as directed

Taking down chowkhat or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm and n, exc 4.00 sqm each complete all as specified.

Taking down chowkhat or frame with shutters (without taking off shutter from the frames) n,exc 1.50 sqm each.

Taking down cement or cement lime plaster on brick or stone and concrete wall /Ceilling etc including raking out joints haking for key scrubbing down with water etc in any description including removal of demolished materials outside of MD land distance exceeding 7 Km but not exceeding 12 Km complete all as directed by Engineer-In-Charge.

Dismantling structural steel work incl doos gates but excluding framed truss etc

M & L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1: 6 all as specified and as directed.

M & L for brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1: 4 all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed or bedding layer in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

All as specified in item here in before but on vertical surface such as in skirting/dado etc over and including backing coat of 10mm thick rendering CM 1:3

M&L for 25 mm thick plan cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete.

M & L for 75MM thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection surfaces finished even and smooth without using extra cement complete all as directed by Engineer -in-charge.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified & directed.

M&L for glazed ceramic tiles 7 to 8 mm thick (square / rectangular polished of size 250 mm x 350 mm x 6-7 mm or 350 mm X 450 mm X 6-7 mm thick as in vertical surface, set & jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM (1:3) complete all as specified & directed.

M & L ATT post treatment for providing and injecting chemical emulsion of chloropyrifos 20% EC for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed.

M&L ATT post treatment Along the external wall below concrete or masonry apron using chemical emulsion of chloropyrifos 20% EC @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed.

M&L ATT post treatment of voids in masonry using chemical emulsion of chloropyrifos 20% EC @ one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing surface complete all as specified & directed..

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement including mixing only water proofing compound as per manufacturer instruction complete all as specified & directed.. Note:- WPC will be measured & Paid separately

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement complete all as specified & directed..

M&L for rendering 5 mm thick on concrete surfaces of ceiling surfaces in cement mortar 1:3, and finish the surface even and smooth without using extra cement including necessary scaffolding complete all as specified and as directed. Note:- Cost of scffolding shall be deemed to include in the quoted rate.

Forming jambs, etc in CM (1:4) to openings (to foregoing item) including cutting,toothing and properly bonding into old work, also facing,jointing and pointing to match existing work complete

Complete removal of existing bitumenois felt treatment over roof surfaces by using wire brushing including cleaning the surface with water and removing rubbish material out of defece land exc. 7 Km but not exceeding 12 km and complete all as specified and directed.

M & L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate) in roof padding and the like including weathering, slightly rounded for chamfered angles and throating, all as specified & directed

M&L for 10 mm thick bedding layer in cement mortar (1:3) using water proofing compound @ 3% by weight of cement or as per manufacturers instructions, on roofs to receive water proofing treatment finished even and smooth without using extra cement all complete and all as specified .

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for roof treatment with app based polymetric membrane 3mm thick (minimum) weight 3.5 Kg / Sqm reinforced with ployster non oven fabrik (weighing not less than 160 gms / Sqm ) shall be applied over and including applying one coat of hot blown bitumen grade 85/25 confirming to IS- 702 @ 1.2 Kg/Sqm over a coat of bitumenous primer @ 0.3 ltr /Sqm application of APP modified membrane shall be by torch application. the overlap shall be minium 100mm on the tranverse direction and 75 mm on longitudianal direction complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bar, dovetailed or welded as per SSR Part-I clause 10.25 conforming to IS- 7452- 1990) complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square in exc 0.5 Sqm in each pane.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.

S&F for joist, channel, angle, or tee sections Fe 290 (Gde E-165), fixed independently, without connecting plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L for weldeing in repairs th of metal to be welded exc 20mm but n exc 25mm thick

S&F mild steel band straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe290 Gde-165

S&F Factory Made Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & sketch shown under section 8 of SSR Part II.

S & F solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & sketch shown under section 8 of SSR Part II.

S&F Pressed steel frames of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

S&F for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkats.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

S&F for 100 mm mild steel but hinges, medium weight, cold rolled all as specified

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple clip (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Aluminium anodised barrel tower bolt 150 mm long extruded section all as specified and as directed

S&F 150 mm Aluminium anodised handle fabricated type all as specified

S&F for 100 mm but hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B 21 all as specified

S&F for 1.0 mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete with gear operated type with chain wheel and hand chain all as specified

S&F Safety lever locks mild steel with 4 leavers for rolling shutters complete all as specified

S&F Ball bearing for rolling shutters complete all as specified

S&F Pre-painted Galvalume (Aluminium Zinc) coated GI based steel sheeting (Galvalume) of approved colour, 0.50mm thick having tensile strength 550 Mpa, TCT corrugated roof sheeting with ribs trimdec type, fixed with SDF screw to steel section in purlins, rafters etc as in roof covering complete all as per manufacture's instruction and as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges, hips, vally gutters, drip and staight flashing fixed with self tapping screws as specified

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store bore of tube in 15mm bore complete.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store bore of tube in 20mm bore.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store bore of tube in 25mm bore.

M&L tubes, medium grade galvanized with all fittings and fixed complte to wall and ceilings or laid in floors, bore of tube 15mm complete all as spfd and directed.

M&L tubes, medium grade galvanized with all fittings and fixed complte to wall and ceilings or laid in floors, bore of tube 20mm bore.

M&L tubes, medium grade galvanized with all fittings and fixed complte to wall and ceilings or laid in floors, bore of tube 25mm bore.

S&F in repair angle valve 15mm dia bore fency type, CP with long shank and cup

S&F in repair concealed stop cock 15mm dia bore fency type, CP with long shank and cup complete all as specified

S&F in repair for Chromium plated fency type 15 mm bore dia Bib tape complete all as specified

S & F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern or flush pipe) pedestal pan and trap including connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specified

S&F plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified

S&F10 lir PVC valveless syphonic action flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size PVC waste coupling with bottle trep of PTMT, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete.

S&F shower rose 15mm size,195mm long with bend of 45degree with flange of PTMT body any colour.(Minimum weight 40gms all as specified and directed

S&F in repair Sinksmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mmx 330mmx 160mm complete all as specified

S&F Vitreous China wall mounted Urinal bowl type with urinal spreader of PTMT fixing to 15 mm bore pipe incl waste pipe and cupling complete.

Cutting chases, pinning in, brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)

S&F PVC floor trap trap 75mm dia bore with grating incl jointing to waste pipe fixed complete all as specified and directed

S&F for PVC connection 15 mm size with brass nuts of length 450mm complete all as specified and directed

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as per specified.

S&F coloured toilet paper holder ,vitreous china,box type all as per specified.

Dismantling PVC water tank and removing from site capacity in ltrs exc 250 ltrs but n. exc size 500 ltrs all as per specified.

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F in repair Gun-metal gate of 25mm dia. globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed all as per specified.

S&F in repair Gun-metal gate of 20mm dia. globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed all as per specified.

S&F 110 mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed

S&F 110 mm PVC (SWR) WC connector bent type etc complete all as specified and directed

S&F 110 mm PVC (SWR) bends any radius etc complete all as specified and directed

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door etc complete all as specified and directed

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed

S&F PVC (SWR) and vent pipes of 100 mm bore size in any length with rubber ring joints fixed to walls etc complete all as specified and as directed

S&F 100 mm PVC (SWR) vent cowl all as specified and directed

M&L three coats of white wash on newly plastered surfaces as on wall including preparation of surfaces, complete all as specified and directed.

M&L two coats of white wash on old decorated surfaces as on wall including preparation of surfaces, complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces, complete all as specified and directed.

M&L for preparation of new surface of walls and applying 2 coats of cement base paint over a coat of primer etc complete all as specified and directed

M&L for complete removal of existing treatment and apply two coat of cement base paint over a coat of primer on old decorated surfaces of walls including preparation of surfaces, complete all as specified and directed

M&L for preparation for newly steel surfaces and applying two coats of synthetic enamel paint over a one coat of red oxide incl preparation of surfaces exc 10cm width or girth

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer of any description not otherwise described over 10cm width or girth complete all as specified.

M&L for preparation of new surface of walls and applying 2 coats of distemper oil emulsion over a coat of primer etc complete all as specified and directed

S&F powder coated ( min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F for 5mm thick plain coloured PVC Sheet in partitions fixed in aluminium frame work as per specification & drawing

M&L for preparation of old steel surface including removal of existing treatment with rust removal chemical, any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for preparation of newly steel surface of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F in repairs 12 mm thick Gypsum board in celing fixed with screw as per manufacturer's instructions complete all as specified & directed.

M&L for preparation of ceiling surface of any description, over 10 cm width or girth and applying two coats of plastic emulsion paint over a coat of primer paint etc complete all as specified & directed.

M&L for 20 mm thick prepolished coloured chequered cement concrete tiles (300 mm x 300 mm ) with grey cement and pigments, set jointed & pointed in neat cement slurry over screed bed of 15 mm thick cement mortar (1:6) etc complete all as specified & directed.

M & L for forming 25 mm wide expansion joint filled with compressible synthetic filler board for complete depth of joint 150 mm provision of closed cell polyethylene backup sheet with heat resistant debonding tape, filled with poly sulphide sealant cold poured (min depth of sealant above backup sheet shall be of 20 mm) confirming to IS-11433(PT-I) or BS-5212 and shall be applied after a primer coat as recommended by manufacturer all as specified and as directed. (Ref drg No CE/ALD/1060 ST)

M & L for forming construction joint, 20mm deep and 10mm wide (using diamond cutter) filled with poly sulphide sealant cold poured (min depth of sealant shall be 10mm) over 5mm thick paper back comprissible debonding strip, rest of the slab thickness shall be provide 200 microne PVC sheet adhered to concrete surface. confirming to IS-11433(PT-I) or BS-5212 and shall be applied after a primer coat as recommended by manufacturer complete all as specified and as directed. (Ref drg No CE/ALD/1060 ST)

Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab, reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 10 users complete all as specified and shown on drawings. (Ref drg no TD/217)

Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab, reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 20 users complete all as specified and shown on drawings. (Ref drg no TD/217)

Soakage, well excavation in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid brick work in CM , RCC slab covers, filling with brick bats, complete of size 1.20 mtr dia and 3.0 mtr effective deep. (Ref drg no TD/576)

M&L for concealed point wiring complete with stranded copper conductor 1.5 sqmm size (Nominal area) 1100 volts grade FRLSH PVC insulated unsheathed multi stranded copper conductor cable in and including concealed steel conduit (ISI marked) not less than 20mm dia including 1.5sqmm standred copper conductor FRLSH PVC insulated unsheathed cable of green colour as earth continuity wire connected to common earth dolly complete with concealed sunk in pressed steel switch boards of reqd size of thickness 1.2 mm factory made and painted with stove enameled black paint with top cover 3mm thick ISI Marked laminated sheet of white colour fixed with brass screws and cup washer and all sunk terminal boxes for each fitting/fixture, complete with all acessories and including cutting and chasing in walls / floors complete all as directed for the followings :- Note :- Conduiting on the wall shall be concealed but if it is not possible to conceal the conduit in the R.C.C roof / Crossing the column / beams then it shall be fixed on the surface as per the condition of the site. (a) For one Light / ceilling fan / exhaust fan point controlled by one way switch

(b) One 5A independent socket point

M&L for pointt wiring for 15 Amps sockets complete with standard copper conductor 2.5 sqmm size (Nominal area) 1100 volts grade FRLSH PVC insulated unsheathed multi stranded copper conductor cable in and including concealed steel conduit ( ISI marked) not less than 20mm dia including 2.5sqmm standred copper conductor FRLSH PVC insulated unsheathed cable of green colour as earth continuity wire connected to common earth dolly complete with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.2mm factory made and painted with stove enameled black paint with top cover 3mm thick ISI Marked laminated sheet of white colour fixed with brass screws and cup washer complete with all acessories and including cutting and chasing in walls / floors complete all as directed. Note :- Conduiting on the wall shall be concealed but if it is not possible to conceal the conduit in the R.C.C roof / Crossing the column / beams then it shall be fixed on the surface as per the condition of the site.

S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 1x20-24 watt (4 feet long), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Philips Cat No BN 021C LED 20S PSU CW GR S2 / Crompton (Cat No : LCCLB24-CDL) / Havells (Cat No : ENDURALINEARNEOBS20WLED830SPCWH) / Bajaj (Cat No. BCLAB 20W)

S&F full glow fully diffused Recessed mounting LED light fitting 2' x 2' , 28-30 Watts with diffused acrylic cover complete with all accessories and making connection by using suitable length of three core flexible copper cable of size 23/0.0076 complete all as specified and directed. Make : Philips (Cat part No: RC383 LED 28S- 6500 PSU OD WH PIR) / Bajaj ( Cat No : BZRSQL 30W GZi NW) / Crompton (Cat No : LCTLRP-30-FO-CDL) / Havells (Cat No : DROPDOWNFLAT2X2PLR28WLED857S)

S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 9-10 watt (2 feet long), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Philips Cat No BN 021 LED 10S 6500 PSU GR S1 / Crompton (Cat No : LCTL-9-CDL) / Havells (Cat No : LUMILINEBS9WLED865SPCWH) /

S&F LED Street Light Fittings having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED to ensure uniform light distribution within higher spacing between poles and maintenance free system for capacity 30 W complete with 40 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including two pairs of M.S. Flat (25 mm x 3 mm) clamps, nuts, bolts, washers etc. all as specified and as directed. Make : Philips (Cat Part No : BRP046 LED 30 CW 066 MR S1 PSU GR) / Havells (Cat No. : ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC) ) / Crompton (Cat No: LSTS-30-CDL-M) / Wipro (Cat No : (LR02-331-XXX-57-XX)

Supply & fix Wall Mounted Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified an directed. Make :- USHA (Model: DOMEN AIRE), Bajaj (Model : Supreme Plus) Note:- Contractor shall have to write MES No. on the body of the fan by using stencil and synthetic enamel paint or by machine cut sticker. Height of the lettering should not be less than 20 mm. Rates to be quoted accordingly.

Supply & fix Wall Mounted Air Circulator fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting complete all as specified an directed. Make :- USHA (Model: DOMEN AIRE), Bajaj (Model : Supreme Plus) Note:- Contractor shall have to write MES No. on the body of the fan by using stencil and synthetic enamel paint or by machine cut sticker. Height of the lettering should not be less than 20 mm. Rates to be quoted accordingly.

Making of hole on existing brick wall upto 500 mm thick for exhaust fan and finishing with cement plaster 1 :4 to make it round making good the disturbed surfaces to match with the surroundings complete all as specified and directed

Supply & fix Heavy duty Exhaust Fans suitable for AC single phase 230/ 240 V of size 300 mm sweep 1400 RPM with louver ABS body complete all as specified an directed. Make :- Almonard / Usha (Turbo) / Havells (Turboforce)

M&L for flame proof point wiring with 1100V AC grade FRLSH PVC insulated un-sheathed electric cable confirming to IS:694, single core having multi stranded copper conductor of size 1.5 Sqmm (nominal cross sectional area) for phase & neutral & 1.5 Sqmm green FRLSH PVC insulated unsheathed copper conductor as an earth wire, connected to earth dolly, drawn in & including 1.2 mm thick concealed ERW stove enamelled rigid steel conduit ISI marked ( IS: 9537) of size not less than 20 mm dia including flame proof fitting such as mild steel junction box, mild steel Couplings unions, bends, reducers, inspection elbow, sealing conduits, plugs etc by providing lugs complete for the one flame proof light/ fan point controlled by single pole one way 16 Amp flame proof ON-OFF rotary switch complete for one light / fan point all as specified and directed. Note :- Conduiting on the wall shall be concealed but if it is not possible to conceal the conduit in the R.C.C roof / Crossing the column / beams then it shall be fixed on the surface as per the condition of the site.

Supply and fix flame proof exhaust fan 305 (12") mm sweep (heavy duty) single phase 220/230 volt AC 1440 RPM, with louvered shutters including mounting frame, nut, bolts, washer, fastners etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long duly passing through metallic flexible conduit with glands etc for connection complete with fixing arrangement complete all as specified an directed . Make :- Sudhir (Cat. No:-EF/140) Smart Tech, Vapi Gujarat (Model No: FF1001) Spot Trading Co.New Delhi

Supply and fix flame proof wall mounting fan 415 mm sweep, Suitable for single phase 220/230 volt AC, 1440 RPM, including mounting nut, bolts, washer, fastners etc and connecting fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long duly passing through metallic flexible conduit with glands etc for connection complete with fixing arrangement complete all as specified an directed. Make :- Sudhir (Cat. No:-WMF/140) Prateek Explosionproof Pvt Ltd (MIDC Badlapur Maharashtra) JD Electricals (Harmi, Vadodara Gujarat) Trimiti Electricals (Thane, Maharashtra)

Supply and fix Flame Proof & Weather Proof fitting suitable for 200W GLS/ 23 Watt LED bulb Front openable complete with 1 No 23 watts LED bulb (Philips / Crompton / Wipro / Havells) all as specified an directed. Make :- Sudhir (Cat. No:-WG/1238) / Baliga / Shyam

Supply and fix Flame proof weather proof LED fixture 2 x 20 W x 4' complete all as specified an directed. Make :- Crompton ( Cat No: EXTN2LT8-16/20) / Sudhir (Cat. No:-FF/1272 / Baliga

LED Flame Proof Well Glass in die cast Aluminium Housing with heat resistant toughened glass having Ingress Protection level IP-65 suitable for 30 Watts complete all as specified and is directed. Make :- Crompton (Cat No : FWL 1315-30-CDL) / Sudhir (Cat No : WG 1238) / Baliga .

M&L for flame proof point wiring with 1100V AC grade FRLSH PVC insulated un-sheathed electric cable confirming to IS:694, single core having multi stranded copper conductor of size 2.5 Sqmm (nominal cross sectional area) for phase & neutral & 2.5 Sqmm green FRLSH PVC insulated unsheathed copper conductor as an earth wire, connected to earth dolly, drawn in & including 1.2 mm thick concealed ERW stove enamelled rigid steel conduit ISI marked ( IS: 9537) of size not less than 20 mm dia including flame proof fitting such as mild steel junction box, mild steel Couplings unions, bends, reducers, inspection elbow, sealing conduits, plugs etc by providing lugs complete for the one flame proof light/ fan point controlled by single pole one way 16 Amp flame proof ON-OFF rotary switch complete for a 15 Amps independant socket point all as specified and directed. Note :- Conduiting on the wall shall be concealed but if it is not possible to conceal the conduit in the R.C.C roof / Crossing the column / beams then it shall be fixed on the surface as per the condition of the site.

Supply and fix Flame proof - weather proof switch socket & plug combined 16 A,250 V(2P+Earth) complete all as specified an directed. Make :- Sudhir (Cat. No:-SS/OA/1010-1) Baliga Prateek Explosion proof Pvt Ltd (MIDC Badlapur Maharashtra) JD Electricals (Vadodara Gujarat)

Taking down old U/S sub main wiring 4 Sqmm/6 Sqmm/10 Sqmm aluminium / copper including batten/conduit and making good disturbed surface to match the existing surface. complete all as specified an directed

M&L for sub main wiring with runs (Red-yellow-blue-Black) of 1100 V grade FRLSH PVC insulated stranded copper conductor cable of size 10.0 Sqmm (nominal area) for line conductors and 2 runs of green colour 1100 volt grade FRLSH insulated stranded copper cable of size 10.0 Sqmm (nominal area) for earth continuity conductor connected to earth dolly, drawn in and including concealed rigid PVC conduit of dia not less than 32 mm dia complete all as specified an directed

S&F for sub main wiring with PVC insulated sheathed 2 x 6 sqmm and 1 x 6 sqmm single core FRLSH cable standard copper conductor 1100 volt grade be use as continuous earth connected to earth down and incl into concealed PVC conduit of dia not less than 25mm with all accessories complete incl making good to disturbed surface complete all as specified an directed

S&F for sub main wiring with FRLSH PVC insulated sheathed 2 x 4 sqmm and 1 x 4.0 sqmm single core FRLS cable standard copper conductor 1100 volt grade to be used as continuous earth connected to earth dolly and incl into concealed PVC conduit of dia not less than 20mm with all accessories complete incl making good to disturbed surface complete all as specified an directed

Taking down main switch/MCB DB/Metal Clad Socket Boards/Three phase enclosure by disconnecting the electric supply all as directed at site.

S&F MCB DB, TPN 4 way Vertical type, 415V,3 phase with rated copper busbar of rating not less than 100 Amps, double door type suitable for MCB as incomer and MCBs as out going ,IP 54 with metal door ,grouted in walls with cement morter 1:4 complete all as specified an directed.

S&F MCB TPN DB,6 way Vertical type,415V,3 phase with rated copper busbar of rating not less than 100 Amps, double door type suitable for MCB as incomer and MCBs as out going ,IP 54 with metal door, grouted in walls with cement morter 1:4. complete all as specified an directed.

S & F MCB TPN 63 Amps "B" curve 10 KA, 415 Volts 50 Hz complete including connecting all incoming and outgoing connection by means of suitable size of lugs / thimbles all as specified and directed

S&F MCB SPN 40 Amp 240V 'B' Series 10 KA. complete all as specified an directed.

S&F MCB SP 6-32 Amps, 240V 'B' Series 10 KA. complete all as specified an directed.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron Wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both ways with MS handle 10mm dia, plastering 15mm thick CM (1:6) internally & externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed.

Supply & lay brick well burnt bricks sub-class 'B' locally available old size laid flat acres the length of trench for protection of cable complete all as specified and directed

Supply and fix thermoplastic polystyrene / polycarbonate enclosure of overall size approx 210mmx155mmx92mm suitable for street light junction box, shock proof, vermin proof and dust proof complete with terminal for upto 3 phase cable of size 16 Sqmm 4 core and 01 Nos MCB SP 6 Amps including metalic clamps and GI nut bolt and washer of suitable size and fixed on pole / wall complete with MS flat clamp (25mm x 3.0 mm) nuts,bolts washers etc. and 02 Nos polymide cable gland of suitable size and making cable connetion. complete all as specified and directed. Make :- Hensel (Cat No : DK 1616 G) / SPELSBERG /GEWIS / RITTAL.

Supply, laying & testing PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable,of size 1.5 Sq mm, 3 Core 1100 Volts, conforming to IS: 694 duly passing through the Poles complete all as specified and directed. Make :- Havells / Plaza / Finolex

S&F Security light bracket made of GI pipe 40mm dia, light grade for mounting, bracket bent (Cold bending to be done through machine) to shape, 1.50 RM long including 2 pairs of suitable MS Flat(25mmx3mm) clamps and nut bolts complete all as specified and directed

S&F LED Street Light Fittings having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED to ensure uniform light distribution within higher spacing between poles and maintenance free system for capacity 40 W complete all as specified and as directed. Make : Philips (Cat Part No : BRP409 LED 040 CW HO MR FG S1 PSU GR) / Havells (Cat No. : ENDURAPEARLNEOSL40WLED757PASYTOPC) ) / Crompton (Cat No: LSTS-40-CDL-M) / Wipro (Cat No : (LR02-451-XXX-57-G1)

Design, supply, erection, testing and commissioning of outdoor type LT Feeder Pillar of overall size not less than 1250mm width x 800mm Height (Without Canopy & Base Channel) x 400mm Depth, M.S. Channel Base Frame mounted (to be mounted on the 3 side covered brick. pedestal of height 900mm above ground level) , suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 150 Amps, Provision of Spreader link to incoming side of MCCBs for termination of cables and 4 way ebonite cable connector (rating 32 amps) for termination of outgoing cables with MCBs.The Feeder Pillar shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt, The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings :-

Design, supply, erection, testing and commissioning of outdoor type LT Feeder Pillar of overall size not less than 1050mm width x 800mm Height (Without Canopy & Base Channel) x 400mm Depth, M.S. Channel Base Frame mounted (to be mounted on the 3 side covered brick. pedestal of height 900mm above ground level) , suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 100 Amps, Provision of Spreader link to incoming side of MCCBs for termination of cables and 4 way ebonite cable connector (rating 32 amps) for termination of outgoing cables with MCBs.The Feeder Pillar shall be duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of Feeder Pillar and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The Feeder Pillar shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having compartmentalized construction for individual switchgears and Bus Bars and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom, suitable for mounting on the brick pedestal through grouting bolt, The panel board shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings :-

Common Note (For all Feeder Pillars): 1) All incoming & outgoing feeders to be marked with aluminium name plates duly rivetted on the front inner door of the feeder pillar. 2) All the cable entry / exit will be through bottom only, duly glanded with single compression type brass cable gland of suitable size. Cost of end termination of cable shall deemed to be included in the cost of feeder pillar. 3) All the inner / outer doors should have locking facility through castle locks 4) Cost of all civil work for brick pedestal, duly plastered, shall deemed to be included in the unit rate quoted, no separate payment shall be allowed for this. 5) The dimention of Panel Board as mentioned above is tentative. If it is required to be enhanced to accomodate the switchgears and maintaining the gaps as per IE Rules, it should be enhanced as per requirement without any extra cost to the department. 6)The thickness of MS Sheet for outer shell and canopy shall be of 3.0mm and inner doors and partitions shall be of 2.0 mm 7) The Panel Board should be designed in such a way that adequete workable space is made available inside every compartments. 8) The drawing of the Panel Board shall have to be got approved by Garrison Engineer before starting of fabrication process.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron strip of size 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 40 mm GI tubing medium grade and necessary fitting for protection of GI Strip incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both ways with MS handle 10mm dia, plastering 15mm thick CM (1:6) internally & externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed.

Taking down old U/S Air termination rod etc complete all as specified an directed.

Taking down old U/S aluminium strip, GI strip etc complete all as specified an directed.

Taking down old earthing and earth pits including test point etc complete all as specified an directed..

S&F MCB SPN 10 Amps, rupturing capacity 10 KA, "B" series complete all as speciifed & dircetd

S&F factory made powder coated sheet steel double door MCB DB 240 volts suitable for SPN 4 way including 100 Amps phase bus bar, neutral bar and earth bus bar complete all as speciifed & dircetd

S&F factory made powder coated sheet steel double door MCB DB 240 volts suitable for SPN 8 way including 100 Amps phase bus bar, neutral bar and earth bus bar complete all as speciifed & dircetd

M&L for earthing complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 3.75 Mts deep below ground level with top edge of the plate not less than 3.00 Mtrs below ground level connected to glavanised iron strip 32 x 6 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified an directed.