REPAIR MAINT TO FENCING BOUNDARY WALL GATES AND ALLIED WORKS IN ZONE A AREA OF AGE BR I CENTRAL UNDER GE CENTRAL KIRKEE

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work and finished even and smooth without using extra cement complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out, in any type of soil complete all as specified and directed.

Returning filling in incl spreading , levelling watering and well ramming in layers n exc 25 cm thick (soil) complete all as specified and directed.

Removing excavated material to a distance n exc. 50 mtr and depositing where directed at a level n exc.1.50 mtr above starting point.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F for mild steel framed work (Conforming to FE-290, Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S & F Mild steel work as in fencing posts and struts, swan neck in fencing incl cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillets (for securing wire mesh) incl all necessary steel bars conforming to FE-410-O or FE-310-O incl one shop coat of primer zinc chromium complete.

S&F for Mild steel screw bolts dia of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm & n.exc 10 cm long complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type, complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Dismantling fencing wire mesh, any type and size, complete all as directed.

S & F in repairs Galvanised. 2 strands, steel barbed wire 2.24mm dia M & L for barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured)

Demolition of reinforced concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC Nominal Mix (1:1.5:3) using 20mm graded aggregate as in columns , piers posts and struts complete all as specified and directed.

M&L for RCC types A1 1:1.5:3 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC types A1 1:1.5:3 (20mm graded aggregate) as in beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for mild steel TMT bar 5 mm dia and over up to and including 10mm dia in stirrups, spacers and binders all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M&L for form work to sides of column footings, plinth beams rough finished surfaces of concrete laid flat all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M & L for pre-cast cement concrete solid block masonry with solid block of the grade C-1, (1:3:6) using 20mm graded aggregate set in CM (1:6) complete all as directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (CM 1:6) complete all as directed.

Removing cement mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.

All as per item No 28 above but except stone complete all as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as specified and directed.

M&L for Raised pointing to RR masonry in CM 1:4 all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finished even and smooth without using extra cement complete all as directed.

M & L for precast cement concrete louvres and jallies type B-0, 1:2:4 (using 12.5mm graded aggregate) 65mm thick (measured solid),all mouldings including demolition of existing RCC Jallies complete.

M & L for Preparation of new surfaces (Plastered or un-plastered) of walls or RCC Jaffries and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing granite or stone slabs of any type and position complete all as directed.

AMBAJI CORPORATION

S.R.M.K Enterprises

M/S DARSHAN ENTERPRISES

V.R.PRAJAPATI AND CO.

Shri Sant Cosntruction