Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
3 Sept 2026, 3:00 pm6d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
KARWAR
2 conditions · 2 needing a document upload
4.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turn over of V/N or V whichever is less, where: V= Advertised value of the tender and N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department /client or Audited Balance Sheet duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Note for 4.2 : Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India.
4.0Eligible Eligibility Criteria: 4.1 Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender Note for Item 4.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of 500 crore and above in last 3 (three) financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered, provided the work experience certificate has been issued by a person authorized by the public listed company to issue such certificates. In case, tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificate for all payments received and copy of final /last bill paid by company in support of above work experience certificate. 4.1.1 Similar Nature of work: " Design, supply, installation, testing and commissioning of 25KV OHE system ". 4.1.2 The following will be applicable for evaluating the technical eligibility: 4.1.2.1 The Tenderer shall submit necessary proof in the form of valid documents/completion certificates from the respective principal clients in support of their technical capability. The client's certificate should inter- alia indicate the date of award, scheduled date of completion, actual date of start and completion of similar work indicating successful completion and final value of contract as per Appendix 2 & Appendix 3. 4.1.2.2 Only those works which have been executed for the Govt/ Semi Govt./PSU and Public listed company as mentioned under Note for item no 4.1 above shall be considered. 4.1.2.3 In case of composite works involving combination of different works, even separate similar nature completed works of required value shall be considered while evaluating the eligibility criteria. 4.1.3 The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Appendix-12. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Design, Supply, Erection, Testing and Commissioning of 25KV, 50Hz, Single phase, Traction Over Head Equipment for proposed full length Siding of CONCOR at Balli station of Konkan Railway under Karwar Region
KR-KW-EL-T-23-2026~KRCL
KR-KW-EL-T-23-2026
Open
Works - General
180 Days
Navi Mumbai, Maharashtra
₹0
₹4.8 L
19 Aug 2026
19 Aug 2026
20 Aug 2026
153 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,40,13,105.29 | ||
| — | 7.00 | — | — | ||
| Preparation of designs and drawings for Overhead Equipment, Switching Station, Sectioning diagram, Power supply diagram, Schematic diagram of Switching Stations, Traction working rule diagram and Instructions etc. required for commissioning of OHE | — | — | — | 17,236.73 | |
| — | 7.00 | — | — | ||
| Submission of designs and drawings for Overhead Equipment, Switching Station, Sectioning diagram, Power supply diagram, Schematic diagram of Switching Stations, Traction working rule diagram and Instructions etc. required for commissioning of OHE. | — | — | — | 2,49,914 | |
| — | 100.00 | — | — | ||
| Supply of Large Span wire (130 sq.mm) including its fittings and mounting arrangements with 9-Ton porcelain insulators 1050 CD. | — | — | — | 1,38,410 | |
| — | 100.00 | — | — | ||
| Erection of Large Span wire (130sq.mm) including its fittings and mounting arrangements with 9-Ton porcelain insulators 1050 CD | — | — | — | 8,825 | |
| — | 20.00 | — | — | ||
| Supply of all types of galvanized Steel Structures, Small Parts Steel etc. | — | — | — | 30,58,880 | |
| — | 20.00 | — | — | ||
| Erection of all types of galvanized Steel Structures, Small Parts Steel etc. | — | — | — | 96,377.4 | |
| — | 30.00 | — | — | ||
| Supply of bracket assembly with insulators as per OHE plan, with Porcelain stay & bracket Insulators 1050mm CD. | — | — | — | 8,84,958 | |
| — | 30.00 | — | — | ||
| Erection of bracket assembly with insulators as per OHE plan, with Porcelain stay & bracket Insulators 1050mm CD | — | — | — | 49,566.6 | |
| — | 100.00 | — | — | ||
| Providing of concrete for Foundation and Plinth, in other than hard and Rocky soil | — | — | — | 7,10,827 | |
| — | 100.00 | — | — | ||
| Laying of concrete for Foundation and Plinth, in other than hard and Rocky soil | — | — | — | 2,29,999 | |
| — | 3.00 | — | — | ||
| Supply of regulating equipment (3 pulley type) with counter weight assembly for conventional OHE. | — | — | — | 2,92,053 | |
| — | 3.00 | — | — | ||
| Erection of regulating equipment (3 pulley type) with counter weight assembly for conventional OHE | — | — | — | 21,437.25 | |
| — | 8.00 | — | — | ||
| Supply of a guy rod assembly | — | — | — | 98,848.8 | |
| — | 8.00 | — | — | ||
| Erection of a guy rod assembly | — | — | — | 15,344.4 | |
| — | 6.00 | — | — | ||
| Supply of material for termination of double Overhead Equipment conductor with Porcelain Insulators 1050 mm CD | — | — | — | 1,24,078.8 | |
| — | 6.00 | — | — | ||
| Erection of material for termination of double Overhead Equipment conductor with Porcelain Insulators 1050 mm CD | — | — | — | 10,820.28 | |
| — | 2.00 | — | — | ||
| Supply of anti-creep with cadmium copper catenary wire including Porcelain insulators | — | — | — | 2,91,400 | |
| — | 2.00 | — | — | ||
| Erection of anti-creep with cadmium copper catenary wire including Porcelain insulators. | — | — | — | 16,341.58 | |
| — | 1.00 | — | — | ||
| Supply of 25 KV, S.P Isolators and with insulator with/without earth contact assembly. | — | — | — | 1,36,861 | |
| — | 1.00 | — | — | ||
| Erection of 25 KV, S.P Isolators and with insulator with/without earth contact assembly. | — | — | — | 9,027.3 | |
| — | 1.50 | — | — | ||
| Supply of a structure bond/longitudinal bond/ transverse and special bond. | — | — | — | 51,959.1 | |
| — | 1.50 | — | — | ||
| Erection of a structure bond/longitudinal bond/ transverse and special bond. | — | — | — | 16,576.95 | |
| — | 1.80 | — | — | ||
| Supply and Erection of Over Head Equipment i.e.(excluding cost of supply of contact & catenary wires), jumper wire, dropper wire, contact / catenary clips, fasteners and all other material required at turnout / overlaps / diamond crossings etc. Final checking of OHE and adjustment, inspection to be done by tower wagon for commissioning of conventional OHE | — | — | — | 1,63,730.88 | |
| — | 1.80 | — | — | ||
| Supply of contact wire (HD GCC 107 Sq.mm) only | — | — | — | 25,08,613.2 | |
| — | 1.80 | — | — | ||
| Supply of cadmium copper catenary wire (65 Sq. mm) only | — | — | — | 25,08,613.2 | |
| — | 1.00 | — | — | ||
| Supply of earth electrode | — | — | — | 3,865.69 | |
| — | 1.00 | — | — | ||
| Erection of earth electrode | — | — | — | 1,505.68 | |
| — | 2.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | — | — | 60,350.6 | ||
| — | 10.00 | — | — | ||
| — | — | — | 2,259.5 | ||
| — | 30.00 | — | — | ||
| — | — | — | 1,98,052.8 | ||
| — | 30.00 | — | — | ||
| Erection of copper jumper with fittings and fasteners | — | — | — | 21,488.7 | |
| — | 10.00 | — | — | ||
| Supply of solid copper busbar 18 mm dia. | — | — | — | 42,794.1 | |
| — | 10.00 | — | — | ||
| Erection of solid copper busbar 18 mm dia. | — | — | — | 3,032.8 | |
| — | 10.00 | — | — | ||
| Supply of all types of connectors for aluminium / copper bus bar | — | — | — | 89,956.5 | |
| — | 10.00 | — | — | ||
| Erection of all types of connectors for aluminium /copper bus bar | — | — | — | 1,227.9 | |
| — | 100.00 | — | — | ||
| Providing and laying of concrete for foundation and plinth in hard and rocky soil requiring chiseling / Blasting | — | — | — | 9,23,806 | |
| — | 25.00 | — | — | ||
| Dismantling / Erection of OHE Mast (Other than upright) | — | — | — | 86,076.5 | |
| — | 10.00 | — | — | ||
| Dismantling/ erection of OHE - Cantilever assembly. | — | — | — | 7,782 | |
| — | 2.00 | — | — | ||
| Dismantling/ erection of OHE - Counter weight. | — | — | — | 7,024.24 | |
| — | 200.00 | — | — | ||
| Supply of structure bond | — | — | — | 1,08,204 | |
| — | 200.00 | — | — | ||
| Erection of structure bond | — | — | — | 1,06,676 | |
| — | 200.00 | — | — | ||
| Supply of approved make retro reflective number plate | — | — | — | 2,00,514 | |
| — | 200.00 | — | — | ||
| Erection of approved make retro reflective number plate | — | — | — | 35,052 | |
| — | 500.00 | — | — | ||
| Modification to existing OHE i.e. Transfer of equipment from one mast or support to another, provision of additional bracket assembly/ assemblies on a mast or support, re adjustment of a head-span, dismantling of Overhead Equipment, dismantling of feeder /return conductor, splicing and extension of an anchored Overhead Equipment, dismantling of a section insulator, slewing of equipment, dismantling of an isolator, dismantling of post/pin insulators. Etc | — | — | — | 34,150 | |
| — | 5.00 | — | — | ||
| Loading/Unloading and transportation of all type of steel structures, portals, TTC, copper / aluminium conductors and SPS etc. other than contractor material | — | — | — | 583.85 | |
| — | 20.00 | — | — | ||
| Supply and Erection of 25 KV AC OHE danger board/danger board for height gauge, public/staff caution board required for commissioning of OHE / SWSs. | — | — | — | 11,986 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Design supply erection testing and
ATTACHMENT
Tenderdocument-OHE-CONCOR-Revised_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].