COMPREHENSIVE MAINT OF JCOs/OR MD ACCN IN ZONE E AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW

Amount

M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed

M & L for rendering 15 mm thick on any face of brick walls or concrete surfaces in CM (1:6 ) finished fair and even complete all as specified and directed.

M & L for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound as per manufacturer instructions finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.

Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.

M & L for rendering 5 mm thick on any face of brick walls or concrete surfaces on ceiling in CM 1:3 finished even and smooth (without using extra lime or cement) complete all as specified and directed

Dismantling of floor hearth or wall tiling including cement mortar bedding and backing coat and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M & L for coloured non skid ceramic floor tiles, shade as approved of size (300 x 300mm) x 7-8mm thick over and including 15mm thick screed bed in CM 1:6 and pointed in white or colour cement to match complete all as specified and directed

S & F for coloured glazed ceramic tiles of size (450 x300mm/350x250mm) x 7 to 8 mm thick and joints in neat cement slurry and pointed in white or colours cement to match with existing wall or vertical surface laid over & including 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.

S & F for light shade vetrified ceramic tiles 8 to 9 mm thick (square/ rectangular) polished of size 600x600mm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and directed

S & F for light shade vetrified ceramic tiles 8 to 9 mm thick (square/ rectangular) polished of size 600x600mm in skirting etc and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 110mm size complete all as specified and directed.

S & F in repair PVC (SWR) TEE equal 110mm size complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 75 mm size complete all as specified and directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging device including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair vitrious China squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap set and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S & F in repair CP Pillar taps 15mm bore brass with capstan head, chromium plated, screwed down high pressure with or without lettred "hot" or "cold" water with long screwed both ends for iron pipe complete all as specified and directed. Make :Essco Jaquar / Player / Prayag

S & F in repair for 15 mm bore CP pillar taps quarter turn fancy type swan neck screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed. Make :Essco Jaquar cat No -TQT-510 / Player cat No- CH1003 / Prayag cat No - 6614

S & F in repair Angle valve quarter turn cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed Make : Essco Jaquar cat No - TQT526 / Player cat No- PAS109 / Prayag cat No - 6610

S & F in repair for CP bib taps quarter turn 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed Make : Essco Jaquar cat No - TQT512 / Player cat No- PAS 106 / Prayag cat No - 6608

S & F in repairs 15mm bore, fancy type chromium plated shower rose 125mm dia with shower arm complete all as specified and directed. Make : Essco Jaquar cat No - EOS-542A / Player cat No- AS1016 / Prayag cat No - BS-67

S & F in repair two way Angle valve quarter turn cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. Make : Essco Jaquar / Player / Prayag

S & F in repairs stop cock (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed of 15mm bore complete all as specified and directed. Make :Essco Jaquar cat No - TQT514A / Player cat No- CH 1012/ Prayag cat No - 6618

S & F in repair single lever brass CP wall mixer 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange (without overhead shower) shower for iron pipe of 15 mm bore GI pipe complete all as specified and directed. Make : Essco Jaquar cat No - TQT-519 / Player cat No- PAS 120/ Prayag cat No - 6680

S & F in repairs CP brass kitchen sink mixer swan neck type for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Essco Jaquar / Player / Prayag

S & F in repairs CP brass center hole mixer quarter turn for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Essco Jaquar cat No - TQT-519 / Player cat No- PAS 121/ Prayag cat No - 6750

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S & F in repair Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

M & L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from BIB TAPS/shower/WHB pillar tap/Stop valves complete by Air pressure/water gravity pressure etc. complete all as specified & directed.

S & F in repairs for 15mm bore Bib tap, fancy type of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs for 15mm bore Pillar tap, fancy type of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs for 15mm bore Angle stop valve, fancy type of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs 32 mm bore Brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repairs 40 mm bore Brass chromium plated Waste coupling for kitchn sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repairs Brass spindle for Bib cock/stop cock/Angle valve /wall or sink mixer / valve any type or pattern complete all as specified and directed.

S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.

Supply and fixing in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

Supply and fixing in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S & F in repair Flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified.

S & F in repair Jet spray, chromium plated, with 1 mtr PVC pipe of superior quality complete all as specified and directed

S and F in repair PVC flexible waste Pipe, 32 mm bore for WHB complete all as specified and directed.

Supply and fixing in repair PVC waste Pipe, 40 mm bore for SINK complete all as specified and directed.

S & F hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge

S & F in repair PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.

S & F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified and directed.

S & F in repair sink with drainage board size 915mmx460 mm, bowl size 410x330x160 mm made of stainless steel sheet 1.00mm thick with plugs, washers and waste pipe & coupling etc including bedding in cement mortar on dwarf wall or cantilever brackets and connection complete all as specified and directed

S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 750 x600x250mm including screws and weight not less than 5.00 Kg complete all as specified and directed.

S & F PVC bath cabinet with looking mirror overall size350X450mm all as specified and directed.

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats

S & F in repairs C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. . Make-prayag

S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F in repair 20mm Ball valves high presure PTMT with epoxy coated Aluminum rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Taking down & refixing shutters of any description exc 1sqm and n exc 2 Sqm in the same opening complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m and not exc 2sq.m each complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) not exc 1.50 Sqm each and removing from sites complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 sqm but not exc 4.00 Sqm and removing from sites complete all as specified and directed

S & F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing Make Rajshree /Sintex.

M & L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solven cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted ihn th MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solven cement, Supplying & fixing in the frame at site as per specification & drawing

S & F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S & F in 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

M & L for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm long complete all as specified and directed.

S & F Butt hinges, medium weight,cold rolled mild steel, 100 mm size complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S & F alumunium handle fabricated type anodised 150mm long complete all as specified and directed.

M & L for Plain fillets of second class hard wood, square, rectangular or triangular in section, wrought finish, secured with nails and bull nosed, splayed, chamfered or rounded on one edge or face, beads sectional area exc 13 and not exc 25 sqcm complete all as specified.and directed.

M & L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified.and directed

Supply and fixing in repair in 18/19 mm thick Block Board grade 2 quality, interior grade, commercial type, fixed with screws etc complete all as specified and directed.

Supply and fixing 0.9 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved by Engineer in Charge fixed to timber frame/wood work, edge chamfered as directed complete all as specified and directed.

S & F 18/19 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination & side balancing white lamination fixed with screws to timber frame work including external fixing of teak wood lipping 6 mm thick with nails and french polishing to teak wood lipping complete all as specified and directed

S & F in repairs Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or electro galvanised fixed with screw to timber frame work complete all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type PVC coated decorative curtain rod of 25mm dia of approved shade including MS bracket/wall to wall including latto on each end complete all as specified and directed.

S & F in repair fancy type CP mild steel curtain rod of 25mm dia including CP bracket/wall to wall including latto on each end complete all as specified and directed.

S & F in repair 150mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.

S & F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples complete all as specified.and directed.

S & F in repair Sheet glass 4mm thick ordinary quality and glazing with rubber bedding etc in squares not exc 0.5 Sqm in each pane complete all as specified.and directed.

S & F in repair 3 mm thick plain glassand glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified.and directed.

M & L in repairs for Mild steel work as in tubular/Angle purlins, rafters and similar items complete including cutting, grinding, welding etc Fe 290 (Gde E-165) as required complete all as specified.and directed

M & L for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L Welding in repairs not exc 2.5 cm in length, thickness of metal to be welded not exc 6mm complete all as specified.and directed.

M & L for preparation of new plastered surface of walls by washing rubbing and applying two coats of cement based paint over a coat of white cement primer complete all as specified.and directed

M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of primer and after applying one coat of wall care putty not less than 1 mm thick complete all as specified.and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed

S & F in repair 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including ridge fixed with self tapping screws complete all as specified and directed.

M & L for cement concrete 1:2:4, Type D-2 using 40 mm graded stone aggregates in post hole / coping filling including demolition of Concrete of any description complete all as specified and directed..

M&L 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement including demolition of cement concrete complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished surface even and smooth without using extra cement including demolition of cement concrete complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement including demolition of cement concrete complete all as specified and directed.

S & F in repair for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M/s Inder Kumar

ANIL CONSTRUCTION

M/s Sachkhand Traders

sidhi vinayak construction

EVEREST CONSTRUCTION

M/S SWATI CONSTRUCTION

M/S Ashif Construction

M/S Vindhya Infraventures