SPECIAL REPAIR TO TOILET AND BATHROOM AT DEPOT COY PROVN OF TOILET BLOCK 08WC 02XURINAL PT 02X WASH BASINS FOR TRADESMAN AT BRC DANAPUR UNDER GE DANAPUR CANTT

Amount

Taking up or down steel tubing 15 mm dia and connections including cleaning for re-fixing or removal to store etc for following bores:-

15 mm bore

20 mm bore

25 mm bore

S&F GI steel tubes, medium grade galvanised with all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc, fixed to walls and in ceiling or laid in floors etc for following bores:-

15 mm bore

20 mm bore

25 mm bore

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floor etc set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tile over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed/Digital coloured ceramic tiles 450 x 300x6-7 mm thick for work on vertical surface such as skirting, dado, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tile ove and including 10 mm thick rendering in CM (1:4) as rough surface on vertical surfaces as backing coat of wall tiles complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection/ flooring and drains etc finishing even & smooth without using extra cement with soucer drain complete all as specified and directed.

M&L 60 mm thickness Machine pressed precast concrete paver block laid with grey cement and pigment in any shape and size confirming to IS 15658-2006, M-35 grade as in floor etc. over all as specified and directed Note: The pattern and make of paver block shall be approved by GE .

M&L Sand filling 50mm thick under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick with broken bricks, watered and rammed to a true surface complete all as specified.

M&L PCC 1:4:8 type-D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete sub base as in floors below tiles/kota stone complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel, or flat section) including distance pieces, cleats etc Fe 410 W (Gde - E 250) Quality A complete all as specified and directed.

Dismantling Asbestos cement Sheets (corrugated, semi corrugated, translucent corrugated etc.) sheets in roof coverings Including ridges complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC 1:2:4 type B1bedding, (using 20 mm graded stone aggregate) and connection pipes (excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic WC).

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed.

S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock 15 mm bore chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F 75/100mm bore PVC (SWR) floor trap,plain with grating including jointing to waste pipe, all as specified and directed.

Taking down AC/PVC pipes, any type (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

S&F PVC (SWR) junction Single, (Single T) 110 mm with access door equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 and n exc1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with with crutch or butterfly handle,screwed both ends for iron pipe or for union and fixed and complete all as specfied and directed.

Taking down cement plaster on brick/concrete walls etc. including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete. Note : (i) Liquid WPC will be measured and paid separately. (ii) Plaster will be executed upto 16 mtr height.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even & smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound (ISI marked) complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface and applying three coat of white wash on walls complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed.

S & F, Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spd and as directed

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150mm size ISI Marked complete all as spd and as directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Blocking up entry of septic tank of capacity 50 users and pumping out effluent dirty and sludge from sludge chambers of septic tank, collecting sludge in closed cart and removing away and cleaning the septic tank with clean water and opening entry sewage line for reuse and removing sludge from premesis (outside to MOD land) complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each complete all as spd and as directed.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr -in- Charge.

Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm)

Excavation over area n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as spd and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spd and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as spd and as directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC 1:2:4 type B1, (using 20mm graded stone aggregate) as in cantilevers, bressmummers, lintels over 1.5 m span, seismic bands etc complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for flat rough finished surfaces of concrete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished , square, rectangular or polygonal surfaces of concrete

M&L form work to sides and soffits of roof beams,beams and lintel or bressurements for rough finished , square, rectangular or polygonal surfaces of concrete

Form work to edges of concrete flats, treads, breaks in floors window cills, concrete railing, openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work complete all as specified.

S&F Mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified

Ditto all as per item No 70 above but 6mm dia and over upto and including 10 mm dia in stirrups, spacers and binders

M&L rendering 10mm thick in CM 1:4 on concrete surfacves/ chajja/ ceiling, etc finished even and smooth without using extra cement

S&F Factory made soild panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

S&F aluminium alloy handles, cast type anodised 125 mm long complete.

S&F, Aluminium hinges (ISI marked), medium weight of size 100 mm complete all as directed

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.

M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash.

M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

Supply and fixed Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd.

S&F Bib taps, cast copper alloy, chromium plated , fancy type long body, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia.

S&F repair vitreous china urinals bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe.

S&F CP urinal spreader for fixing with 15 mm bore pipe complete all as specified.

S&F 15 mm dia stop valves, cast copper alloy, with iron wheel head, screwed both ends for iron pipe, all as specified

S&F in 15mm bore angle cock, cast copper alloy CP, fency type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified

S&F in Gun metal, globe or gate valve with iron wheel head, 20 mm bore, , screwed both ends for iron pipe all as specifed.

S&F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 (using 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides .

S&F PVC (SWR) pipe 75mm bore including Rubber ring joint on wall with solvent adhesives complete.

S&F PVC (SWR) bends any radius provided of 75 mm dia

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

Material and labour for cleaning surfaces and applying evenly a coat of hot blown bitumen grade 85/25 @ 1.20 Kg per Sqm over a coat of bituminous based primer @ 0.30 Kg per Sqm till the surface is properly impregnated. After the application of the bitumen, provide polymeric water proofing membrane of approved quality weighting not less than 3 Kg per Sqm with 100 mm over laping and bonded completely to the substrata and the over laps sealed / fused by flame or by bitumen as per manufacturers instruction. After the membrane is laid a layer of blown bitumen grade 85/25 @ 1.20 Kg / Sqm shall be applied and one coat of aluminium paint at the rate of 100 gram per sqm as per manufacturer instruction over bituminous layer complete as directed. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

M/L plastering 15 mm thick in cement mortar 1:4 on concrete surfaces with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item No 99 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item No 99 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 99 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type Extruded housing (enhances safety) with high quality polycarbonate diffuser, 4 ft, 2000ml, voltage protection range 140V -270V, NW 4000K, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as speicified and directed.

Supply and fixing LED lights fitting 1x 10W, 220V,AC decorative box type Extruded housing (enhances safety) with high quality polycarbonate diffuser, 2 ft, 2000ml, voltage protection range 140V -270V, NW 4000K, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as speicified and directed.

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core.

M & L clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid.

M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .

Supply and fixing for batten/angular fittings complete all as specified and directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

S & F LED light fitting 1x9W bulkhead luminaires including LED light driver connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing metal body air fan / ventilator with louver 450 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .

S & F Building security/street with bracket LED light fitting 70 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

S & F for Gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe complete all as specified and as directed of 25 mm (1”) dia

M & L for Cutting existing GI/CI water mains 80 mm dia in position for insertion of tee, branch line etc to new water connection complete all as specified and directed.

PAPPU ROY CONSTRUCTION (BID ID -3341184)

M/S Harsh Traders (BID ID -3343591)

Jai Ambay Construction (BID ID -3344040)

M/s KUMAR ENTERPRISES (BID ID -3343034)

M/S SHEO KUMAR SINGH AND SONS (BID ID -3342234)

RC GUPTA AND SONS (BID ID -3343442)

M/S NANDA CONSTRUCTION (BID ID -3342960)