COMPREHENSIVE B/R MAINT OF WARDS,TOILETS AND CONNECTED AREAS OF MH UNDER AGE B/R-II OF GE SATWARI

Amount

Notes : (i) Work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions. (ii)The contractor is required to resolse the complaints in piece meal manner and render feedback to Engr-in-charge within 24 hours.The site will be handed over on requirement basis .

S&F aluminium powder coated (coating not less than 50 micron) door frame and door shutter, door frame of hollow section 101mm x 44.0mm x thickness not less than 1.53 mm & hollow section of stiles of glazed shutter 85mm x 44.45mm x thickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm x thickness not less than 1.50mm and bottom rail of hollow section 83.5mm x 44.45mmx thickness not less than 1.50mm ,one derived handle 300mm long,100mm long butt hinges - 4 Nos , aluminium floor type hydraulic door closer, aluminium mortice lock 65mm, 4 levers of Godrej pattern and rubber packing, aluminium beading complete all as specified and directed.

S&F aluminum powder coated (coating not less than 50 micron) window and ventilator shutters, side hung type, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed

M&L for aluminum powder coated (coating not less than 50 micron), sliding window, three track with stainless steel mosquito proofing with window style of section 44.4mmx44.5mmx 2.0mm thick and frame of section 101.60 x 44.45 mmx 1.20mm thickness including 4.0 mm thick coloured/tinted/frosted glass panes & all necessary fittings and fixtures complete all as specified and directed.

M&L anodised aluminium grills (coating not less than 50 micron) , 4mm dia and size 100 x 100mm, fixed into aluminium window complete all as specifed and directed.

M&L for taking down wall panelling including any type of aluminium door,window & partition in any position complete all as specifed and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body), designation No 1, universal type suitable for door shutter 700mm width and weight not more than 35 kg complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made out of mild steel heavy duty & fixed complete all as specified and directed.

S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.

M&L for 5.5 mm thick, tinted sheet glass ordinary quality and glazing with oil putty or with any type of beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 5.5 mm thick, tinted, frosted sheet glass ordinary quality and glazing with oil putty or with any type of beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and fixing new ones complete all as specified and directed.

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with glazing pins, oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F in repair central hole basin mixer without popup waste system with 450mm long braided hoses, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair bib tap, chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair pillar tap long neck with aerator, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair florentine surgical purpose elbow action pillar cock, 15 mm bore with extended lever handle, made of cast copper alloy, chromium plated, suitable for medical/surgical use complete with all necessary fittings and tested for proper functioning and leak-proof performance complete all as specified and directed .

S&F in repair Bib Cock, 15 mm bore, single lever type, florentine model, surgical purpose elbow action with extended lever handle and wall flange, made for cast copper alloy and chromium plated, suitable for wall mounting in medical/ surgical areas, compete with all necessary accessories, fixed in position and tested to ensured proper operattion and leak-proof performance complete all as specified and directed .

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair chromium plated spreader for urinal complete all as specified and directed.

S&F in repair brass chromium plated tubular towel ring of 180mm dia, fixed with CP brass screws including plastic beads complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type , 600 mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair corner glass shelf of size not less than 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

S&F in repair waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified and directed.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends complete all as specified and direced.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends complete all as specified and direced.

S&F in repair chromium plated Jet spray with 1.50m long flexible tube and fixed complete all as specified and directed.

S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed

S&F in repair PVC white colour seat cover for EWC complete with mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinges and 'P' or 'S' trap device complete all as specified and directed

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all as specified and directed

S&F in repair PTMT round grating of dia 100mm complete all as specified & directed .

S&F in repair PTMT round grating with waste hole of dia 125mm complete all as specified & directed .

S&F PVC waste pipe 32mm bore of required length complete all as specified and directed.

M&L for dismantling of water tank of capacity exc 500 ltrs but n. exc 1000 ltrs and removing complete all as specified and directed.

Disconnecting existing tanks of capacity upto 1000 ltrs, setting aside (or lowering if required) for repairs etc and hoisting if required ,reconnecting and re-fixing in position complete all as specified and directed.

M&L for dismantling of water tank of capacity exc 1000 ltrs but n. exc 2000 ltrs and removing complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 2000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, triple layered, white hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc, from water tanks of capacity exc 500 & n. exc 1000 litres in any position and from mouths of circulating pipes etc and disinfection completely by making all the arrangements complete all as specified and directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm including necessary fittings (Min weight 210gm) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of bore 25mm including necessary fittings (Min weight 455gm) complete all as specified and directed.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

S&F Galvanised steel tubing, 25mm bore, medium grade with all fittings, fixed to wall/ ceiling or laid in floors complete all as specified and directed

S&F fittings i.e bends,tees,elbows,uninion etc for galvanised steel tubing, 15mm bore, medium grade complete all as specified and directed

S&F fittings i.e bends,tees,elbows,uninion etc for galvanised steel tubing, 20mm bore, medium grade complete all as specified and directed

S&F CPVC pipes SDR 11 of outer dia 15mm, having thermal stability for hot & cold water supply, including all necessary fittings, fixed to walls with clamps/ceiling or laying in floors using one step CPVC solvent cement complete all as specified and directed.

S&F CPVC pipes SDR 11 of outer dia 20mm, having thermal stability for hot & cold water supply, including all necessary fittings, fixed to walls with clamps/ceiling or laying in floors using one step CPVC solvent cement complete all as specified and directed.

M&L for cutting (in brick walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

S&F in repair stainless steel lock grating plain/hole, 100mm dia including embeding in tiles with white cement complete all as specified and directed.

S&F in repair UPVC (SWR) type B pipes, 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair UPVC (SWR) type B pipes, 110 mm bore, single socketed in any length with rubber ring joints,fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F in repair UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints,fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) bends with access door,any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door,any radius, 110 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, branch piece,single , (single 'Y') with access door for 75 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, branch piece,single , (single 'Y') with access door for 110 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, branch piece,double , (double 'Y') with access door for 75 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, branch piece,double , (double 'Y') with access door for 100 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, junction single, (single 'T') with access door, equal or unequal for 75 mm bore complete all as specified and directed

S&F UPVC (SWR),type B, junction single, (single 'T') with access door, equal or unequal for 110 mm bore complete all as specified and directed

S&F UPVC (SWR) type B, reducers 110 mm dia complete all as specified and directed.

S&F UPVC (SWR) type B,vent cowl 75 mm dia complete all as specified and directed.

S&F in repair UPVC (SWR) type B, floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) multi floor trap with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed..

S&F in repair UPVC (SWR) type B,gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for steel water tubing of 40 mm bore,medium grade,galvanised, laid in sunken floors as spout complete all as spec

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No -81 here-in-before but except bricks complete all as specified and directed.

M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent). Base coat: Berger HS Latex plus (or equivalent) both on wall (upto 1 mtr min height) and floor. Consumption base coat: 0.3 kg/sqm Reinforcement: Glass fiber Second and Third coat: Latex sheild 2K (or equivalent) both on wall (upto 1 mtr min height) and floor. Consumption top coat: 3 kg/sqm System requirements: density: 2.00 kg/ltr compressive strength: 0.5 N/mm². • Wall penetration through the RCC slab must be sealed using Berger HS RepirO(or equivalent). • Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus(or equivalent) modified cement slurry upto 5ft. • All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus (or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus(or equivalent)modified cement slurry including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc complete all as specified and directed .

M&L for rendering 10mm thick in cement mortar 1:4 mixed with water proofing compound on roof surfaces , surface finished even and smooth without using extra cement complete all as specified and directed. Note:- water proofing compound will be measured and paid separately

Supply only liquid water proofing compound.

S&F 20 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout to pour out residual water out from the treated area complete all as specified and directed .

M&L for hard core of gauge not exceeding 63mm using broken bricks, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in mass filling ,foundation complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in floor,finished even and fair complete all as specified and directed .

S&F 7 to 8mm thick,non skid coloured ceramic tiles, light shade, (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors/skirting etc , set,jointed and pointed in tile adhesive anti slip white and tile epoxy grout as per the manufacturer specifications to match the colour of tile complete all as specified and directed. .

M&L for glazed ceramic coloured digital tiles,450x300x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured digital tiles,200x300x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified ceramic coloured, light shade tiles (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L for 8 to 9 mm thick vitrified ceramic coloured , light shade tiles (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm ,in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified double charged ceramic coloured tiles (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L for 12 mm thick non skid dura stone coloured digital vitrified ceramic tiles (heavy duty) parking tiles,(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement motar 1:4 complete all as specified and directed.

S&F machine cut kota stone slab in flooring, treads of steps (one piece including rounding/ mouldings of edges of treads), 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab 10-12 mm thick in riser of steps, skirting , dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting and mirror polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for cutting,grinding and mirror polishing on kota stone to give high gloss finish and applying white/coloured cement with pigment to match the shade of kota stone in the joints complete all as specified and directed

M&L for granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as complete all as specified and directed .

M&L for precast cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies,kerb stone etc. complete all as specified and directed.

M&L in repair for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in floor,finished even and fair complete all as specified and directed .

Dismantling Wall and ceiling boards (fibre,pulp, insulation) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc complete all as specified & directed.

Dismantling of timber scantlings 40Sqcm and over in section, framed work,in any position complete all as specified and directed

S&F GI snap grid frame work (Grid size 605mm x 605mm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed ..

S&F in repair Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed.

S&F in repair sinks with drainnage board , made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed .

S&F in repair sinks , made of 1mm thick stainless steel,overall size of sink 680mm x 535mm with bowl size 610mm x 460mm x 225mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed.

Complete removal of existing water proofing treatment of any description including under layer, taking down cement plaster any thickness ,tiles and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust complete all as specified and directed.

Cleaning the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufactures method statement by Berger HS Rapairo (or equivalent) with HS Latex Plus (or equivalent) & cement in mixing ratio of 1:4 where ever required complete all as specified and directed.

M&L for HomeSheild PU Roofkoat(or equivalent) is a one component liquid ,solvent free , cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years warranty .ASTM D 6083-97 a Waterproofing and heat reflecting system having following key performance properties:- a) UV resistant ,prevent yellowing and weathering b) Highly elastic upto 350% and crack bridging c) Excellent adhesion on porous and non-porous substrates d) Tensile Strength >10 N/mm2 with GeoTextile fleece e) Soler Reflective Index (SRI) more then 109-111 ASTM E1980-11 System: First coat:Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent) Coverage: 0.2kg/sqm(with 50% dilution of water) Reinforcement: Geotextile 40 gsm Second coat:Home sheildroofkoat(or equivalent) Consumption: 0.5 kg/sqm. Third coat: HS PU roofkoat(or equivalent) Consumption : 0.8 kg/sqm. System buildup-1.5kg/sqm with geotextile of 40gsm

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof, finished & laid to required slope complete all as specified and directed .

S&F grouting of roof or concrete surface joints with cement based grout mixed with approved water proofing compound (1 part OPC, 2-3 parts fine sand, 1 part water proofing compound and water to achieve the desired consistency) applied to fill all gaps and cracks, ensuring a tight, seamless seal. The grout will be smoothed with a float and left to cure for a minimum of 24 hrs, protected from rain and moisture. The grouting ensures durable, water-resistant joints to prevent seepage and water ingress as per satisfaction of the Engineer-in-charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for capillary rise treatment of walls with following specification:- Base coat: Berger HS Latex plus or equivalent in make specified in PS Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K or equivalent in make specified in PS Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr compressive strength: 0.5 N/mm2.

M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on roof surfaces , surface finished even and smooth without using extra cement complete all as specified and directed. Note:- water proofing compound will be measured and paid separately

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facia , column, pillar, ceiling and similar items of width n. exc 200 mm with plain cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregates) or with 15mm thick rendering in cement mortar 1:3 without using extra cement,surface finished even and fair (as per site requirement) complete all as specified and directed. (Note:- Quoted rated shall be deemed to include:- (i) Formwork and scaffolding required & taking down or dismantling as per site requirement (ii) The work is to be executed upto 4th storey building

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described by grinding the uneven surfaces and necessary filling of putty (as and where required) to make surface even and smooth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coats of oil emulsion distemper including making good uneven surface/holes with wall care putty (where ever required) complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over two coats of wall care putty 1 to 2 mm thick each and one coat of primer complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of weather proof exterior emulsion including making good uneven surface/holes with wall care putty (where ever required) complete all as specified and directed.

M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

S&F in repair brass face/spindle as per existing for CP/brass bib tap, angle/stop cock, pillar cock, wall mixer, WHB mixer, concealed stop cock etc suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair syphonic kit for flushing cistern of capacity 10 litres complete all as specified and directed .

S&F in repair urinal pipe of any size complete all as specified and directed .

M&L for repairing aluminium shutters including tightening and making good using rubber/beads and others small fixtures/fittings i.e handles, stopper etc( if required) and refixing by making the shutters serviceable complete all as specified and directed .

S&F PVC frame made of 35 mm wide and 5 mm thick PVC battens, placed at 600 mm center-to-center (c/c) horizontally and vertically, securely fixed using solvent adhesive or screws, following the manufcature's instructions. Ensue that the battens are level, properly aligned, and capable of supporting the PVC panels. All work shall comply with the manufacture's guidelines and be executed as per the direction of the Engineer-in-charge.

S&F 7.5 mm prelaminated PVC panels of approved shade and design with tongue-&-groove joints over the PVC frame or wall, using solvent adhesive or screws, in strict accordance with the manufacture's instructions, including necessary PVC beadings such as T-bead for mid-joints, U-profile for edges, and L-angle for corners, all following the manufacture's guidelines and as directed by the Engineer-in-charge.

J P TECHNO (BID ID -3403508)

AKSHAY CONSTRUCTION COMPANY (BID ID -3402473)

M/S Shesh Paul Gupta (BID ID -3404099)