Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H1₹16.5 CrAdmitted-Finance THIRD FLOOR AMIT CRYSTAL SENAPATI BAPAT ROAD PUNE 411 016 | PUNE | PUNE | MAHARASHTRA | 411016 | ₹16.5 Cr | H1 | Admitted-Finance |
| 2 | H2₹15.7 CrAdmitted-Finance A 602 SARITA GARDEN CHS LTD OPPOSITE SBI BANK VAKOLA PIPELINE SANTACRUZ EAST MUMBAI 400055 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400055 | ₹15.7 Cr | H2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Ramsangam Projects Pvt Ltd H2 | Shubham EPC Private Limited H1 |
|---|---|---|---|---|---|
| 1.01 | Subwork I :- Providing Internal & External Electrification at the Shree Jyotiba Temple,At Wadi Ratnagiri Tal-Panhala, Dist.Kolhapur
Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No WG-MA/CON. | 7,000 | M | 100.8 ₹7.1 L | 105.84 ₹7.4 L |
| 1.02 | Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessories on wall / ceiling as per specification No WG-MA/CON. | 4,000 | M | 142.8 ₹5.7 L | 149.94 ₹6.0 L |
| 1.03 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW | 3,000 | M | 65.1 ₹2.0 L | 68.36 ₹2.1 L |
| 1.04 | Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW | 3,000 | M | 32.55 ₹97,650 | 34.18 ₹1.0 L |
| 1.05 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-6] | 4,500 | M | 97.65 ₹4.4 L | 102.53 ₹4.6 L |
| 1.06 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. | 121 | Each | 75.6 ₹9,147.60 | 79.38 ₹9,604.98 |
| 1.07 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. | 121 | Each | 111.3 ₹13,467.30 | 116.87 ₹14,141.27 |
| 1.08 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. | 121 | Each | 117.6 ₹14,229.60 | 123.48 ₹14,941.08 |
| 1.09 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete. | 121 | Each | 168 ₹20,328 | 176.4 ₹21,344.40 |
| 1.10 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. | 20 | Each | 155.4 ₹3,108 | 163.17 ₹3,263.40 |
Updated dates
Tender Value
₹15.7 Cr
EMD Value
₹7.9 L
Closing Date
24 Feb 2026, 6:00 pmClosed
Exe.Engineer Kolhapur Elect. P.W. Div. Kolhapur
Executive Engineer P. W. Elect. Division Kolhapur Public Works Deptt. Campus Tarabai Park Kolhapur Pin-416 003
Est No.142055 of 2025-2026 Prov. Internal and External Electrification, Fire Fighting, CCTV,PA, HVAC System and Illumination to the Shree Jyotiba Temple, at Wadi Ratnagiri Tal-Panhala, Dist.Kolhapur.
2026_PWDM_1277431_1
eTender Notice No.70 of 2025.2026
Open Tender
Electrical Works
365 days
Kolhapur
Please Refer Tender Documents
2 documents required · 2 mandatory
₹3,540
₹7.9 L
Pune Via Video Conference
17 Mar 2026
14 Feb 2026
27 Feb 2026
14 Feb 2026
24 Feb 2026
14 Feb 2026
17 Feb 2026
Subwork I :- Providing Internal & External Electrification at the Shree Jyotiba Temple,At Wadi Ratnagiri Tal-Panhala, Dist.Kolhapur Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No WG-MA/CON.
Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessories on wall / ceiling as per specification No WG-MA/CON.
Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW
Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No WG-MA/BW
Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No WG-MA/BW [1-3-6]
Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.
Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter duly erected on provided plate and box with wiring connections complete.
Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.
Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.
Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.
Supplying, installing, testing and commissioning of 20kVA capacity online pure sine wave with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS
Supplying and erecting 12V/100Ah SMF battery with battery terminal wire duly charged with 24 months warranty complete.
Supplying, erecting and marking SPMCB 6A to 32A B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 8 ways / phase (24 poles) with door 1.2mm thickness surface/ flush mounted IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
Supplying and erecting triple pole and neutral distribution board (TPNDB) SPMCB of 12 ways /phase (36 poles) with door 1.2mm thickness surface/flush mounted IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
Providing and erecting 4 Pole MCCB 415V 250A rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides with insulation withstand capacity 800V no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
Supplying, Erecting and Commissioning of 2 pole RCCB 16/25A electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
Providing and erecting floor/wall mounting MCCB panel board with door suitable for four pole incoming 250A 8 ways Four pole outgoing up to 100 A MCCBs on iron frame as per specification no SW-SWR/MCCBPB. (Excluding MCCBs)
Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.
Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.
Supplying and erecting terminal spreaders suitable for 4 pole up to 100A MCCB
Supplying and erecting terminal spreaders suitable for 4 pole above 250A up to 400A MCCB (Set of 8)
Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 50 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 70 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 120 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 6 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 10 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 4 core 16 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.
Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 200 mm outside dia double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface to required depth complete.
Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.
Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.
Supplying, erecting and marking FPMCB 40A to 63A with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB [5-3-13]
Providing and erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware.
Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete and recording the results Specification no. EA-MOBI
Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.
Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EA-EP.
Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS 15652 – 2006 having 2 mm thickness up to 3.3 kV
Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 140 kVA up to 180 kVA capacity Three phase 415 Volts 50Hz A.C. with all standard features safeties etc as per specification no. GEN-AMF.
Making cement concrete foundation in 1 2 4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).
Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel concrete excavation fixing provided nut bolts with the help of template duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).
Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 50 mm height complete with necessary coupler plates & hardware.
Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 100 mm width & 50 mm height complete with necessary coupler plates & hardware
Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm x 200 mm complete with necessary cover plates & hardware
Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm x 300 mm complete with necessary cover plates & hardware.
Supply Installation Testing & Commissioning of ESE Lightning Arrestor Controlled Early Streamer Emission Air Terminal ( ESEAT) with following specification Protecting Radius 107 Mtr with suitable mast height with triggering time of 60 micro seconds as per NFC 17 - 102 which emits local electrostatic field that develops naturally around the shaft as thunderstorm begins to gather The Air Terminal shall be tested to support a 100 kA current ( wave form 10/350 us ). Test to be performed in compliance with NFC 17 102 or equivalent standards. The ESEAT should be able to work in both (positive and negative) Lightning polarities. ESEAT shall be in strict compliance with the new test guidelines as per Annex C of the revised NFC 17 102 version 2011 for ESE lightning protection system. The ESEAT shall be made of stainless steel 304L/316 grade non corrosive metallic components Electronic Circuit capacitor Bank Transformer Amplifier Sensor etc. to generate the Streamer. The device to be a fully autonomous system requiring no external power supply. Testable on site using proprietary testers. The ESEAT should be sustainable designed to mitigate its environmental impact. Complete as required.
Supply Installation Testing and commissioning of Main LT panel requirements Panel With 16 SWG 7 Tank Processed Epoxy Powder Coated.Cable Entry From Top & Out From Top Side Of Panel. The minimum sizes of sections of bus bars are given in Table . Each phase duly covered with Red yellow Blue and Black Colour Heat Shrink Sleeves.The Panel Should be Should be Outdoor Type & Floor/wall Mountable with IP-42. Name Tag Plates Should Be Provided As Per The Requirement.Paint - Seminice Gray - Powder Coating. The Panel should be Inspected & Tested at Manufacturing Place before dispatch At Site.All incomer feeders with R Y B Phase Indicating Lamp & IMP Meter panel details.A) Incomer no-1) 4 pole 250A MCCB- 02 nos 2) 200A 4P ATS - 01 nos B) Outgoing - 1)4 pole 63A MCB - 05 nos 2) 4 pole 40A MCB - 10 nos
Supplying erecting testing and commissioning of DIESEL GENERATING SET with 160KVA alternator confirming to CPCB-IV plus Emission Compliant output continuous rating 3 phase 415 V 50 Hz 0.8 p.f. A.C. supply a totally enclosed air coofed/liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours along with standard accessories self-excited self-regulated screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/-5% with performance class G3 and maximum fuel consumption Itr/hr 75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters switchgears indicators connected with suitable wires/cables the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet sound absorbing material to restrict sound level up to 75 dB at 1.0 m provided with first filling of oil suitable capacity DEF tank diesel not less than 690 IIr etc. on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG This D.G set is Fitted in Soundproof & Weather Proof Acoustic Enclosure as per CPCB IV plus Emission Compliant (with acoustic enclosure as per latest Government norms) approved Norms. for bellow mentioned capacity GEN-DG
Subwork 2 :- Providing Fire Fighting System at the Shree Jyotiba Temple,At Wadi Ratnagiri Tal-Panhala, Dist.Kolhapur Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3 core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting & terminating FR XLPE insulated galvanised steel formed wire armoured (strip) cable 1100 V 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, installing, testing and commissioning of main fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal type single stage centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/EP
Supplying, installing, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor 415 volts 3 phase 50 Hz AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal/vertical type multi stage centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade) mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor TEFC synchronous speed 3000 RPM suitable for operation with IP 55 protection for enclosure horizontal foot mounted type with Class-'F' insulation conforming to IS-325. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/JP
Supplying, installing, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following (a) Horizontal type single stage centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade) mechanical seal conforming to IS 1520. (b) Water cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v 50Hz AC supply diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding residential silencer instruments and protection as per standard specification stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate coupling coupling guard foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/DP
Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-5]
Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-6]
Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-7]
Providing G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP [13-6-8]
Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system. [13-6-10]
Supplying and erecting 100 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV [13-7-2]
Supplying and erecting 150 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV [13-7-3]
Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-19]
Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-20]
Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating as per specification no. FF-VL/BFV [13-7-21]
Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV [13-7-24]
Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating as per specification no. FF-VL/NRV [13-7-25]
Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating as per specification no. FF-VL/GV [13-7-32]
Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV [13-7-35]
Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV [13-8-2]
Supplying and erecting 63mm dia reinforced rubber lined (R.R.L.) hose pipe 15m in length fitted with necessary accessories complete as per specification no. FF-FFA/RRL [13-8-4]
Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ [13-8-8]
Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC [13-8-10]
Supplying and erecting 20/25mm dia gun metal air release cock with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV [13-8-13]
Supplying and erecting 100 mm dia. pressure gauge 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve erected with provided G.I. pipe elbow etc. complete as per specification no. FF-FFA/PG [13-8-14]
Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve G.I. nipple elbow etc complete as per specification no. FF-FFA/PS [13-8-15]
Supplying and erecting brass orifice plate having 6 mm. thickness 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP [13-8-16]
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve hose pipe hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8 x6 ) and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) [13-8-20]
Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. [13-15-1]
Supplying Installing Testing & commisioning of water Jet Monitor 63 mm dia with provided isolation valve G.I. nipple elbow etc complete as per specification. [11-11-11]
Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism pressure guage Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire. extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A B C class of FIRE complete. [11-11-12]
Supplying and erecting of fire Exit & Eire Exinguisher signlge Indicating the floor-numtber in words & syslem(Fire Exiinguisher & Accessories ) (Non CSR Approved by S.E.Office mumbai vide T.S letter no- 108 Date- 13/01/2022 ) [11-11-13]
Subwork 3 :- Providing CCTV System at the Shree Jyotiba Temple,At Wadi Ratnagiri TalPanhala, Dist.Kolhapur Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No WG-MA/CC [1-1-9]
Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. [1-8-21]
Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC [1-10-1]
Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC [1-10-16]
Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch 370W 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS [1-11-9]
Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. [1-12-1]
Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP [1-12-4]
Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA [1-12-11]
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK [1-12-18]
Supplying Installation Testing & Commissioning of 5MP PoE IP Bullet Camera with AI based automatic varifocal lens from 3.3 to 10 mm lens and 30 meter inbuilt IR Dual Streams with configurable bit rate GOP and frame rate Edge based Video Analytics- object classification (Human/Vehicle) object in field line crossing enter field leave field loitering follow route objects stopping or starting to move counting occupancy condition change similarity search 16 number of analytics/rules can be configured simulaneously. The video analytics software can detect up to 64 objects per frame in real time. support memory card up to 2TB capacity with health monitoring for early service indication. The recording in local storage should also be AES encrypted support ONVIF S G T M with MQTT event forwarding onboard data security by using TPM (Trusted Platform Module) and PKI supports TLS 1.3 Secure boot Signed Firmware software sealing to notify of device configuration changes Embedded Login Firewall to minimize DDOS Attack X.509 v3 digital certificates with SHA516 signature hash audit logs Unsecure ports like HTTP and RTSP are disabled by default uses RTSPS/SRTP for video streaming UL 2900-2-3 Level 2 cybersecurity certified Camera should have UL EN CE FCC NDAA with IP 66 and IK10 impact protection(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [111-11-111]
Supplying Installation Testing & Commissioning of 12MP IR Panoramic camera with AI based 1/2.3?inch CMOS 360° lens Effective Pixels 3008 x 3008 (9 MP) 1 to 25 [30] fps Sensitivity 30IRE 0.15lux(color) 0.048lux(mono) 0 lux with IR 20m IR 120 dB WDR Video compression H.264 (MP)/ H.265 (MP) M- JPEG Electronic Day/Night White Balance Automatic Electronic Shutter Backlight compensation Intelligent Dynamic Noise Reduction (iDNR) Privacy Masking Rule based alarms and tracking Line crossing Enter /leave field Follow route Loitering Idle / removed object People counting Crowd density estimation 3D tracking based on Duration Size Aspect ratio v/h Speed Direction Color Object classes (Upright persons Bikes Cars Trucks) Camera Trainer (machine learning to train user specified objects) Built-in microphone(Integrated array with 3 digital MEMS audio sensors) Signal-to-Noise Ratio Full-duplex / half duplex Audio Streaming Memory card slot 10/100 Base-T ONVIF Profile S G M & T clientside/cameraedge dewarping IP66 NEMA 4X IK10 PoE CE UL FCC.(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [111-11-114]
Supplying Installation Testing & Commissioning 55 professional LED display with 1920 *1080 ( Full HD) Display suitable for 32/64 channel NVR and following features Brightness minimum 500 Cd/m2 Contrast Ratio minimum 1000 1 Viewing angle 178/178 deg. Response time maximum 8 ms Inputs HDMI VGA BNC USB Audio In Built-in speakers maximum 10 W Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON
Supplying Installation Testing & Commissioning of Client Workstation with 21 Inch Monitor HP Z2 Tower G9 Workstation i7-12700 12C 2.10 / 64GB (4x16GB) DDR5 4800 ECC / 512GB M.2 SSD + 1 TB SATA / NVIDIA T1000 8GB 4mDP / DVD RW / 500W / Win 11 DG Win 10 / 5/5/5 With Monitor / Display
Supplying Installation Testing & Commissioning of 5MP Outdoor Dome camera with AI based 1/2.9?inch CMOS Effective pixels 3072 (H) x 1944 (V) 30fps Sensitivity – (3100K reflectivity 89% 1/25 F1.3 30IRE)Color 0.24 lx Mono 0.03 lx With IR 0.0 lx 120 dB Dynamic range Electronic Day/Night Automatic Electronic Shutter (AES) H.265 H.264 MP (Main Profile) M-JPEG Video compression White balance Backlight Compensation Privacy Mask Rule based alarms and tracking Line crossing Enter /leave field Follow route Loitering Idle / removed object People counting Crowd density estimation 3D tracking based on Duration Size Aspect ratio v/h Direction Color Object classes (Upright persons Bikes Cars Trucks) Audio detection (if microphone used) 3 to 10 mm Automatic Varifocal (AVF) lens MicroSD card slot for edge recording Motion tamper and audio detection(if microphone used) FTP IR range upto 30mtrs Dropbox and e-mail applications 3 axis adjustment ONVIF Profile S & G & T PoE IP66 and NEMA 4X IK10 CE FCC UL certified. SD card support up to 2TB.(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [111-111-113]
Subwork 4 :- Providing PA System at the Shree Jyotiba Temple,At Wadi Ratnagiri TalPanhala, Dist.Kolhapur Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No WG-MA/CON. [1-2-4]
Supplying, erecting, testing and commissioning of stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector stereo jack complete as per specification no. FF-PA/MIC [13-11-3]
Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. [13-11-10]
Supplying installation & commissioning for RE-2AS Supply of EN 54-16 certified and EN 60849 standards public address and voice alarm system that ensures a fast safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup 6 zones 3 audio inputs 6x6 audio matrix Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features - 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex Supply of EN 54-16 certified and EN 60849 standards public address and voice alarm system that ensures a fast safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup 6 zones 3 audio inputs 6x6 audio matrix Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features - 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex (NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-1113]
Supplying installation & commissioning for RE-2AS BC Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated the card becomes a key for the charger to work permanently.Package dimensions (W x H x D) 190 x 20 x 140 mm . Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated the card becomes a key for the charger to work permanently.Package dimensions (W x Hx D) 190 x 20 x 140 mm Warranty 5 Years(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-114]
Supplying installation & commissioning for RE-2AS PTT Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit you do not need to add an external power supply. Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit you do not need to add an external power supply. Warranty 5 Years(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-115]
Supplying installation & commissioning for RE-2AS MPE Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use. Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use.(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-116]
Supplying installation & commissioning for RE-2AS WMK Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet Warranty 5 Years(NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-117]
Supplying installation & commissioning for RE-2AS 4L Supply installation Testing & commissioning of Network module to connect multiple PAVA systems. cable length Up to 200m per node and up to 4 units and 24 zones 4 PAVA systems shall be network with length of max 800m dimmensions (H x W x D)120 x 100 x 80 mm. Supply installation Testing & commissioning of Network module to connect multiple PAVA systems. cable length Up to 200m per node and up to 4 units and 24 zones 4 PAVA systems shall be network with length of max 800m dimmensions (H x W x D)120 x 100 x 80 mm. Warranty 5 Years [11-11-18]
Subwork 5 :- Providing HVAC System at the Shree Jyotiba Temple,At Wadi Ratnagiri TalPanhala, Dist.Kolhapur Supplying, installing, testing and commissioning of window type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor room air conditioning unit 1.7TR to 2.00TR capacity having ISEER minimum 3.1 to maximum 3.29 suitable to operate on 250V 50 Hz A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser minimum 2.5PM filter self diagnosis feature stabilizer free operation & temperature display on indoor unit noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC [3-2-6]
Supplying, erecting, testing and commissioning of 24HP VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant for minimum cooling capacity as delivering 100% capacity at 47° C non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00 modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area rain protection cover built in oil separator accumulator and oil receiver copper tube aluminium fin air cooled condenser condenser fan with motor suitable for 415V±10% 50 Hz 3 phase power supply (all suitable for high ambient conditions) internal copper refrigerant piping internal wiring and refrigerant etc. all housed in powder coated weather proof cabinet complete. [3-11-10]
Supplying, erecting, testing and commissioning of VRV / VRF based ceiling suspended 8.0TR (6600 cfm) to 10.0TR (8200 cfm) Treated Fresh Air (TFA) (5380 cfm) room/IDU with evaporator fan with motor copper tube aluminium fin evaporator coil washable air filter insulated drain tray in built drain pump expansion device cordless remote control with necessary controls and electrical terminal to receive power . having anti-corrosive coating suitable for coastal area with decorative slim dimension suitable ceiling suspended arrangement and an electronic control console with any additional refrigerant and oil charge as per requirement during installation complete. [3-11-59]
Supplying and erecting circular flexible/rigid PVC pipe duct of size 40mm dia 4mm thickness with required couplers reducers T-joints Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers filters at position complete. [3-11-62]
Supplying and erecting circular flexible/rigid PVC pipe duct of size 50mm dia 4mm thickness with required couplers reducers T-joints Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers filters at position complete. [3-11-63]
Supplying, erecting, testing and commissioning of air curtain of 6 feet width having air throw velocity of 21 m/sec low noise level up to 38 to 46dBA suitable for door height upto 9 feet working on 1 phase 230V 50Hz A.C. supply. [3-11-76]
Supplying, erecting, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism mounting arrangement rubber refrigerant kits etc. complete. [3-11-81]
Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete. [3-11-82]
Supplying and installing of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways Nitrile rubber insulation painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. [3-11-86]
Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. [3-11-88]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-89]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-90]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-91]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-93]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-94]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-95]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-96]
Supplying, laying / fixing, testing and commissioning of of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports hangers clamps vibration isolators and fittings such as bends tees valves gauges strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages fungal growth flame spread water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. [3-11-97]
Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-2]
Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-3]
Supplying and erecting GI sheet 1 mm (20 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629 1985 to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. [6-1-4]
Supplying and erecting iron work sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. [6-1-19]
Providing and erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. [7-11-3]
Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC [13-11-6]
Supply fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam anti microbial insulation (Nitrile Rubber) with minimum density of 40 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class 'O' & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory adhesive bonding inline with LEED requirements & installed as per manufacturers recommendation. The insulation joints shall be sealed with 3 wide Black Tape. Thermal Insulation - 9mm thick('NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-112]
Supply fabrication and installation of acoustic lining of supply and return air ducts as specified and shown on the drawing complete with 10 mm thick acoustic insulation with Open Cell Foam Insulation - Armasound Microban antimicrobial product protection with Thermal conductivity 0.045 W/m deg.K / density 140180 kg/m3 with manufacturer recommended adhesive inline with LEED requirement.Acoustic Insulation - 13mm thick('NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-113]
Supply Installation Testing and commissioning of Main HVAC panel requirements Panel With 16 SWG 7 Tank Processed Epoxy Powder Coated.Cable Entry From Top & Out From Top Side Of Panel. The minimum sizes of sections of bus bars are given in Table . Each phase duly covered with Red yellow Blue and Black Colour Heat Shrink Sleeves.The Panel Should be Should be Outdoor Type & Floor/wall Mountable with IP-42. Name Tag Plates Should Be Provided As Per The Requirement.Paint - Seminice Gray - Powder Coating. The Panel should be Inspected & Tested at Manufacturing Place before dispatch At Site.All incomer feeders with R Y B Phase Indicating Lamp & IMP Meter panel details.A) Incomer no-1 4 pole 63A MCB-01 nos B) Outgoing - 1)4 pole 32A 300mA RCBO - 04 nos ('NCSR approved by CE Pune vide TS.No.6595/17-10-2025 & Est No.111093/2025-2026) [11-11-114]
Subwork 6 :- Providing Illumination at the Shree Jyotiba Temple,At Wadi Ratnagiri TalPanhala, Dist.Kolhapur Supplying fixing and commissioning of Adjustable Surface Mounted Projector Light with integrated ring raster IP 65 with RAL finish LED 24W 3000K CCT GAI>90 Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Body made of Die cast Aluminium. Effective delivered lumens 2000-2200 MacAdam Step 2 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years. Similar to Bega make 84 953 & As per Direcction of Engineer Incharge [30-1-141]
Supplying fixing and commissioning of Adjustable Surface Mounted Projector Light with integrated ring raster IP 65 with RAL finish LED 36W 3000K CCT GAI>90 Medium 30 deg beam Having Minimum CBCP value of 9300 Candella . Body made of Die cast Aluminium. Effective delivered lumens 3000-3200 MacAdam Step 2 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years. Similar to Bega make 84 954 & As per Direcction of Engineer Incharge [30-1-142]
Supplying fixing and commissioning of Ground recessed Uplight for column with integrated ring raster IP 67 Rated Body to be of High Grade Die Cast Aluminium with SS trim. Fixture to have 10w Led with Cool Touch Feature Narrow 10 deg beam Having Minimum CBCP value of 5500 Candella Color tempreture to be 3000k GAI>90 800-850 lumens CRI 90 MacAdam Step 2 with Remore Dali Driver glare rating UGR<16. Lifespan ? 50000 hrs Ambient temperature 25°-40° C L&B Ratio L70/B20 with Lumen Maintenance LM80 Standard Warranty 5 Years. Similar to Bega make 84 796 & As per Direcction of Engineer Incharge [30-1-143]
Supplying fixing and commissioning of Surface Mounted Adjutable Downlight with integrated ring raster IP 65 with RAL finish LED 24W 3000K CCT GAI>90 Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Effective delivered lumens 2000-2200 MacAdam Step 2 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years.Similar to Bega make 84 953 & As per Direcction of Engineer Incharge [30-1-145]
Supplying fixing and commissioning of Customized Deep mala Light IP65 with RAL finish LED 2-3W 2400-2700K CCT Diffused Beam° MacAdam Step 3 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 80 including DALI driver. . Standard Warranty 5 Years. [30-1-146]
Supplying fixing and commissioning of Surface Mounted Adjustable Projector Light with integrated ring raster Auminium Die Cast Body IP 65 Rated with RAL finish LED 15W 3000K CCT GAI>90 24° beam Having Minimum CBCP value of 3000 . Effective delivered lumens 1200-1300 MacAdam Step 2 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years.Similar to Bega make 84 952 & As per Direcction of Engineer Incharge [30-1-147]
Supplying fixing and commissioning of Adjustable Surface Mounted Projector Light IP65 with RAL finish LED 45W RGBA CCT MacAdam Step 3 3000K CCT GAI>90 glare rating UGR<19 Lifespan ? 50000 hrs Ambient temperature 25° C L&B Ratio L80/B20 with Lumen Maintenance LM80 CRI 80 including DMX driver. Standard Warranty 5 Years.Similar to Bega make 84 964 & As per Direcction of Engineer Incharge [30-1-148]
Supplying fixing and commissioning of Adjustable Surface Mounted Projector Light with integrated ring raster IP 65 with RAL finish LED 15W 3000K CCT GAI>90 Medium 30 deg beam Having Minimum CBCP value of 3000 candella . Body made of Die cast Aluminium. Effective delivered lumens 1200-1400 MacAdam Step 2 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years.Similar to Bega make 84 952 & As per Direcction of Engineer Incharge [30-1-149]
Supplying fixing and commissioning of Adjustable Mini Surface Mounted Spotlight with integrated ring raster IP65 Body to be made of Die Cast Aluminium with RAL finish LED 2W 3000K CCT GAI>90 Narrow 15 deg beam . Effective delivered lumens 150- 200 MacAdam Step 3 glare rating UGR<19 Lifespan ? 50000 hrs L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90 including DALI driver.Standard Warranty 5 Years.
Supplying fixing and commissioning of 1 mtr Floor Recessed Linear Grazer having IP67 rating & IK08 rating with aluminium body for installation. LED 48W/m RGBA CCT Grazer Optic (10°) Real lumens 1510 lm/m. MacAdam Step 3 glare rating UGR<19 Operating Voltage 220-240V Lifespan ? 50000 hrs Ambient temperature -+40° C L&B Ratio L80/B20 with Lumen Maintenance LM80 CRI 80 including DMX driver. Additional mounting accessories Antiglare louvre louvres. Standard Warranty 5 Years. Finish of the luminaire shall be matched with location from the architectural point of view.Similar to phos make LBW75-45WA12-RGBW & As per Direcction of Engineer Incharge [30-1-151]
Supplying fixing and commissioning of 1 mtr Surface Mounted Linear Grazer With Antiglare Louvers IP 67 rated Die Cast Aluminium Body with adjustable Brackets LED wattage to be 15W/m 3000K CCT Garzer 10x24 deg Optic MacAdam Step 3 Remote Dali Dimmable Delivered lumens Real 1200lm/m glare rating UGR<19 L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90.. Standard Warranty 5 Years.Similar to phos make DB-NA-LV-300-27-20-ONOF-BT & As per Direcction of Engineer Incharge
Supply Installation Testing and Commissioning of Adjustable Gobo Projector Light Flat-field high-contrast image projection 5 200 lumens output across the entire zoom range Efficient optical system with integrated 15° - 45° zoom system Configurable design for reduction of resources cost and weight One gobo or four gobo modules Animation module Manual framing module for precise framing of projected image 0-100% electronic dimming Hibernation mode for very low power consumption Compact and slim design RDM and DMX control Local diagnostics and focusing via magnetic sensor Dedicated compartment for install of Power and DMX In/Out cables Optional PD Hybrid In/Out cable solution for easy daisy-chain Automatic thermal management for safe operation in high and low ambient temperatures Fully-weatherized housing (IP66 IK08 and C-5 High corrosion rating) Shipped in FSC-certified cardboard packaging Thermal Cooling Convection and forced air (temperature regulated) Maximum surface temperature 60° C (140° F) Maximum ambient temperature (Ta max.) 45° C (113° F) * Minimum ambient temperature (Ta min.) -30° C (-22° F)* 5-year warranty Similar to Unilamp make EXTERIOR PROJECTION PRO COMPACT (From Martin) & As per Direcction of Engineer Incharge [30-1-153]
Supplying fixing and commissioning of Post Top Luminaire including 3 mtr Pole made up of Die-cast aluminium (UNI EN 1706). - PMMA Frosted basket screen - Stainless steel Powder Coating - Standard color is Neri Grey IP65 & IK10 with RAL finish LED 40W 2200K CCT Symmetrical beam optics. Effective delivered lumens 2000-2200 lumens MacAdam Step 3 glare rating UGR<19 Lifespan ? 50000 hrs Ambient temperature < 40° C L&B Ratio L80/B20 with Lumen Maintenance LM80 CRI 80+ pf>0.95. Compliance -In compliance withIEC60598-1IEC60598-2-3IEC62031IEC/TR62778. Standard Warranty 5 Years Similar to Bega make 84 057 & As per Direcction of Engineer Incharge [30-1-154]
Supply Installation Testing and Commissioning of Pole Mounted Adjustable Gobo Projector Light having Wattage of 40W and Delivered Lumens of 2500. Beam Degree 17-30. IP 65 rated with Pole mounting Bracket. CRI >70. Driver to be non dimmable and Integrated. Life time of Led L70B20 35000 hrs. Gobo design to be decide by Architect/Lighting Designer.Including 4mtr. pole The 40 Watt High-Power Gobo projector for pole mount provides extra power. With its special holder the projector can be attached to poles or tubes and is suitable for year-round outdoor use or for damp interiors. The lens is equipped with a special gasket which prevents the penetration of moisture. All encapsulated electronic components are waterproof. An external ballast is included which is connected via a watertight connection tube to the projector. Product to be suitable for outdoor projections on facades or portals messages on pavements or areas in pedestrian zones – up to a diameter of about 4 m (13 feet). The projection motif (gobo) can be changed without tools. (procurred locally) Warranty 5 Years Similar to Unilamp make 5942-C-E-686-XX & As per Direcction of Engineer Inachrge [30-1-155]
Supply abrication and installation of a custom-made heritage chandelier of diameter 2000 mm and height 2000 mm made from heavy-duty metal frame with antique brass / bronze / gold leaf finish as approved by the architect. The chandelier shall include precision-cut K9 / lead crystal elements in pendants prisms and beads arranged in multi-layer form to create a grand decorative effect. Fixture shall be suitable for E14 / E27 LED lamps or integrated LED modules providing warm white light (2700K–3000K) with CRI ? 90 and dimmable control. Suspension shall be with heavy-duty chain/rod system and canopy plate designed to safely carry the total load with 3× safety factor. All wiring shall be flame-retardant copper with proper earthing. The chandelier shall comply with IEC / IS standards and be supplied with shop drawings finish samples and load details for approval. Minimum warranty 5 years.
Supply Installation Testing and Commissioning of Decorative Wall Light. Housing IP65 & IK10 with RAL finish LED 40W 2200K CCT Symmetrical beam optics. Effective delivered lumens 2000-2200 lumens MacAdam Step 3 glare rating UGR<19 Lifespan ? 50000 hrs Ambient temperature < 40° C L&B Ratio L80/B20 with Lumen Maintenance LM80 CRI 80+. Standard Warranty 5 Years [30-1-157]
Supplying fixing and commissioning of Surface Mounted Diffused Linear Luminaire[1 mtr] having IP66 with aluminium body for installation. LED 12 - 14 W/m 3000K CCT Diffused Optic Real lumens 700-800 Real lm/m. Operating Voltage 24VDC MacAdam Step 3 glare rating UGR<19 Lifespan 50 000hrs Ambient temperature -+40° C L&B Ratio L80B20 with Lumen Maintenance LM80 CRI 90 including DALI driver. Standard Warranty 5 Years Similar to Phos make NF-9.4X10-TV-27-90-67-24-CM & As per Direcction of Engineer Incharge [30-1-158]
Supplying fixing and commissioning of Surface Mounted Flexible Linear Grazer [1 mtr] with aluminium mounting channel LED wattage to be 10-14W/m RGBW CCT Grazing Optic Remote Dali Dimmable Delivered lumens 500-600 Real lm/m glare rating UGR<19 L&B Ratio L70/B10 with Lumen Maintenance LM80 CRI 90.. Standard Warranty 5 Years. Similar to Phos make NF-15X15-SV-RGBW-90-67-24 & As per Direcction of Engineer Incharge [30-1-159]
Supply of DALI Dimming controller Controls 2 independent DALI links with up to 64 DALI ballasts per link. Can take care of Color Tunable fixtures. 4 groups of sensors inputs Occ sensor daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSN-2UNVDAL- D Warranty 5 Years Similar to Lutron make QSN-2DALUNV-D/S & As per Direcction of Engineer Incharge
Supply of Switching module with 4 channels each channel with minium 5 amp rating with provisions of sensors inputs Occ sensor daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSNE-4S 5230D module Warranty 5 Years Similar to Lutron make QSNE-4S5-230-D & As per Direcction of Engineer Incharge
SupplyThe QSE-CI-DMX control interface allows zones on a to control DMX512-controlled devices Any zone can be mapped to either a single DMX512 channel or to three separate DMX512 channels for RGB/CMY color-control The DMX channels (maximum of 32) are mapped to zones and can be programmed as 1- channel lighting 1-channel integration or 3-channel RGB/CMY Warranty 5 Years Similar to Lutron make QSE-CI-DMX & As per Direcction of Engineer Incharge
Supply of central processor assembled processor with one/two configurable links and inbuilt BACnet for occupancy status. Each processor link can be configured to be a dimmer link shade link or dimmer power panel link. Processor accpets 220-240V 1 phase 2 wire 10A feed (throiugh power supply) Similar to Lutron Athena Warranty 5 Years Similar to Lutron make QP-2L & As per Direcction of Engineer Incharge
Supply of QSPS-DH-1-75 QS Link Power Supply provides up to 75 Power Draw Units (PDUs) at 24 Vnominal output (22.5-25 V ±1% 2.5 A 60 W SELV/PELV/NEC Class 2) for powering compatible Lutron QS system accessories and antenna devices such as keypads sensors and interfaces on the QS link. Regulatory approvals include UL/cUL CE and NOM efficiency meets U.S. DOE Level VI standards. Warranty 5 Years Similar to Lutron make QSPS-DH-1-75 WQSPS-DH-1-75 & As per Direcction of Engineer Incharge [30-1-165]
Supply of Lighting control and monitor software It captures floor-wise consumption per-event tracking energy reporting per processor space utilization trends occupancy data customizable alerts and exportable analytics for optimized building management and real estate decisions accessible on any major browser required per processor with 5 year warranty. [30-1-166]
Supply of Lighting control BAC net softwares for BMS integration. This license for BACnet software enables a third-party building management system to control monitor and manage lights and shades in various areas on a processor. This license can also be used to share information between the control system and other control systems such as area occupancy power usage lighting state etc. License required 1 per processor. Warranty 5 Years [30-1-167]
Supply of QS cable for power and data simialr to Lutron QS-CBL-LSZH Cable Adheres to CE standards for Low Smoke Generation (EN 60332-1-2) Halogen Gas Emission (EN 61034-2) and Flame Retardation (EN 60754- 1&2). • Five Conductors Common – 0.75 mm2 (18 AWG) Power – 0.75 mm2 (18 AWG) MUX Data – 0.25 mm2 (22 AWG) _ Data – 0.25 mm2 (22 AWG) Drain Wire – 0.2 mm2 (24 AWG) Laying in suitable conduits to be done by Electrical contractor.Similar to Lutron make QS-CBL-LSZH & As per Direcction of Engineer Incharge [30-1-168]
The scope of work includes the supply installation testing and commissioning of a suitable Distribution Board (DB) box for mounting dimming and switching modules complete with all necessary accessories such as enclosures busbars terminal blocks MCBs internal wiring and supports as per approved drawings and specifications the DB box shall be of robust construction properly ventilated factory finished and designed to facilitate easy integration with the Lighting Management System ensuring safe reliable and efficient operation after successful testing and commissioning. [30-1-169]
Programming of complete system The scope of work includes the complete programming testing and commissioning of the Lighting Management System (LMS) covering configuration of lighting zones dimming levels sensors and schedules as per the approved control philosophy integration with BMS/third-party systems if required point-to-point and functional testing of all devices fine-tuning and calibration preparation of test reports and as built documentation and providing necessary training to client/end-user staff to ensure the LMS is fully functional compliant and ready for handover. [30-1-170]
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
142055Dtp.pdf
Tender Documents • 18.75 MB
BOQ_2198031.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid