Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹35.3 L+₹2,601 (0.07%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹35.8 L+₹52,191 (1.48%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹36.7 L+₹1.3 L (3.82%)Rejected-AOC VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹39.5 L+₹4.2 L (11.8%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_560549_1
8400-880/E8
Open Tender
Civil Works
Works
240 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
Yes
9 Jan 2023
31 Oct 2022
29 Nov 2022
31 Oct 2022
28 Nov 2022
14 Nov 2022
Amount
Demolition of brick work built in cement mortar complete all as specified and directed.
M&L for brickwork with old size sub class 'B' bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:6) complete all as specified and directed
All as per item No 2.00 mentioned here-in-above but except bricks complete all as specified and directed
M&L for brick work with old size sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in CM (1:4) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and directed.
M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.
M&L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.
S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and directed.
M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed
Demolition of stone slub and tiles of any description or thickness in floor, aprons etc laid bedded in any mortar complete all as specified and directed.
M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry complete all as specified and directed
M&L for glazed ceramic tiles 350 x 250 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match brick or concrete surfaces.including 10mm thick cement plaster in CM (1:3) on brick or concrete surfaces complete all as specified and directed.
M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors or skertings etc set and jointed in neat cement slurry and pointed in white or coloured cment to match complete all as specified and directed.
M&L for coloured vitrified ceramic tiles (joint free) 10 mm thick (Square/Rectangular) area of each tile exceeding 0.36 sqm in floor area, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer in mortar (1:6) for laying floor finishes and pointed in white or coloured cment to match complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, incl screed bed 20mm in CM (1:6) complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.
M&L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per manufacturer instructions including and direction.
M&L for 20 mm thick black granite machine cut bedding and jointed with gray cement slurry including policeing and half round edges complete all as specified and directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Rendering 15 mm thick cement plaster in CM (1:6) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
Rendering 15 mm thick cement plaster in CM (1:4) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
Rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in CM (1:4) and second coat to be applied with WPC and recrone polyster fibre including fair finishing complete all as specified and directed (Note: WPC & Recron polyster fibre will be measured and paid separately).
Supply only liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment.
Rendering 5 mm thick cement plaster in CM (1:3) on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat chalk whitening primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall applying two coats of oil bound distemper over a coat of primer complete all as specified and directed (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
Preparation of old plastered or unplastered surfaces on wall applying one coat of oil bound distemper complete all as specified and directed (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and directed.
Taking down chowkats or frames with shutter without taking off shutter from the frame n.exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutter without taking off shutter from the frame exc 1.5 sqm & n.exc 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed By Engr-in-charge.
Taking down wooden shutter exc 1.00 Sqm but n.exc 2.00 each and removing to store complete all as specified and directed
Taking down shutter of any description.exc 1 sqm and n. exc 2 sqm each and refixing in same opening after curing or easing & adjusting complete all as specified and directed
Taking down shutter of any description n.exc 1 sqm each and refixing in same opening after curing or easing & adjusting complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.
S&F factory made 35 mm thick 2nd H. W. plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed. (Note: The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated).
S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.
M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.
S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brasscup pivots, catch spring and pulleywheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.
S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F butt hinges 100 mm of size extruded aluminium allay with galvanised ms hinge pin anodised and fixed type C21 complete all as specified and directed
S&F aluminium handle 150 mm size anodised complete all as specified and directed
S&F aluminium tower bolts150 mm long complete all as specified and directed
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.
S&F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
S&F MS Butt hing medium weight cold rolled 100mm size complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed
S&F 2nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed.
S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and directed.
S&F in repair harrison rails, mild Steel chromium plated with fixing brackets stops, rollers etc as in curtain rails complete all as specified and directed by engr-in- charge.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.
Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.
Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed.
S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.
S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed
S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 meter long complete all as specified and directed
S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair grating square/rounded 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.
S&F in repair 15 mm bore stop valve cast copper alloy fancy type, chromium plated with long sunk and cup, screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions (concealed type) complete all as specified and directed.
S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets) all as specified and directed. (Make: Hindware, Parryware, Commander (Slim Line)).
fixing only in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets) all as specified and directed.
S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair vitreous china squatting pan of pattern 'Orrisa' size 580 x 440mm white with integral foot rests including connection to trap and to flushin pipe, antisyphonage pipe ect complete including making good to existing (floor / Tiles). (Make : HINDWARE / Parryware)
S&F in repair vitreous china wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and directed
S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed.
S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms) complete all as specified and directed.
S&F prelamenated partical board interior grade prelaminated one side with decorative choice lamiation and other side balancing white lamination, fixed with screw to timber frame work 18/19 mm thick used for cupboard shutter and similar work including fixing of wooden beading complete all as specified and directed.
Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed
S&F for anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed
M&L for providing and fixing non asbestos 6mm thick designer building board fixed/laid or inserted to timber /GI/Aluminium frame work with screws as per manufacture instruction complete all as specified.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.
Taking down steel window/ventelator and refixing at same opening after rectifying/reparing unfunctional/ defective parts,using flat iron fillet whereever requred,changing of box type hinge minor parts for easing, adjusting and greasing etc.complete all as specified and directed
S&F in repair brass choromium plated tubular towel rail 20 mm dia with brackets complete all as specified and directed.
S&F mild steel in repair 300 mm ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
Taking down eaves gutters and rainwater pipes(any size or pattern) including all fittings,heads,shoes bends etc complete all as specified and directed
S&F PVC (SWR) rain water 110 mm pipe single socket in any length with rubber ring joint, fixed to walls complete all as specified and directed
S&F PVC (SWR) bend 110 mm complete all as specified and directed
S&F PVC (SWR) pipe 75 mm dia complete all as specified and directed
S&F PVC (SWR) bend 75 mm dia complete all as specified and directed
M&L for PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed
Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.
M&L for PCC(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed
M&L for 25 mm thick average PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 complete all as specified and directed by Engineer- in-Charge.
M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) without using extra cement and WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).
M&L for preparation any surfaces of roof and applying two caots of Ployuretthene (PU) acrylic based water proofing liqid compound over & including one coat of self priming primer @ one lire per Ten Sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. (Notes:- (i) As per description of this item minmum two coats of Ployurethene (PU) acrylic based water proofing liqid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof tratment. (ii) Quoted rate shal be deemed to be included for work in building/Strcture of any height)
Dismaltaling of AC corrugated,samecorrugated sheets in roof covering complete all as specified and directed
S&F pre - Painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre - Painted galvalume aluminium zinc coating @ 150 GSM GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops roller etc complete all as specified and directed
M/S S M ENTERPRISE
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
UNIVERSAL TRADING
KAZI SAHABUL ALAM
S. D. Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .