Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹62.5 Laccepted-aoc | ₹62.5 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
23 Apr 2026, 9:30 pmClosed
Engineering Wing of Health and Family Welfare Department
M N Jagadeesh
Repairs to Govt. Nature & Yoga Cure Medical College & Hospital Building, K.R.S Road, Mysuru.
EWHFWD/2025-26/BD/WORK_INDENT1995
EWHFWD/2025-26/BD/WORK_INDENT1995
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Executive Engineer Office Mysore
4 documents required · 4 mandatory
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2021-22 to 2025-26) The tenderer should have been Satisfactorily completed at least one Similar nature of work of value not less than Rs.31.29 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b)..2 (b).
Clause ITT 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e. (2021-22 to 2025-26). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1) Cement Concrete Block Masonry/BBM/SSM - 25.00 Sqm, 2) Flooring-114.00 Sqm., 3) Plastering -53.00 Sqm,4)Painting-2002.00 Sqm, 5) False Ceiling Works - 4.05 Lakhs Note -The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/autonomous bodies of Government will be considered for the clause 3.2 (c).
Clause 3.2(d) To qualify for award of this contract The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works CCTV Works in the last five years i.e (2021-22 to 2025-26) totaling Rs. 8.09 Lakhs in any one year Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d). The letter of willingness of the sub contractor to be engaged for electrical works should be obtained and uploaded in the KPP-portal
Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works in the last five years i.e (2021-22 to 2025-26)totaling Rs.-- Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e). The letter of willingness of the sub contractor to be engaged for water Supply works should be obtained and uploaded in the KPP-portal.
Clause 3.6 -Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx2.5-B Where A maximum value of civil engineering works executed in any one year during the last five years 2021-22 to 2025-26 updated to 2026-27 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2026-27 price level of existing commitments and ongoing works to be completed during the next 3 months. Note. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
KPWD Class-III and above Registration Certificate.
GST Registration Certificate
Bidder address & Phone No.
Clause ITT 3.2 a)To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. (2021-22 to 2025-26) a)achieved in at least two financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.62.58 Lakhs Note : a) For Clause 3.2 (a) the certificate duly certified by the charted accountant is to be submitted.
Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs. 18.77 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractoror
₹1,570
₹1.3 L
23 Apr 2026
13 Apr 2026
24 Apr 2026
21 Apr 2026
Repairs to Govt. Nature & Yoga Cure Medical College & Hospital Building, K.R.S Road, Mysuru. (Civil Works)
Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges ...
Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...
Renewing Glass panes, with putty and nails wherever necessary including racking out the old putty: Float Glass panes of nominal thickness 5 mm (weight not less than 12.5kg/m²)
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...
Providing Sal wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
styrene butadiene styrene (sbs) based - Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of...
Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, ...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing and supplying Acoustical Wall Paneling with square edges made of fibre Glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and class...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wooden Partition: Frame made of 12 mm BWR Plywood of standared quality . The frame to be
covered by 8mm BWR Ply on both sides. And finished with 1 mm Laminated on both sides. Total thickenss of the pa...
Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical
support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with
Repairs to Govt. Nature & Yoga Cure Medical College & Hospital Building, K.R.S Road, Mysuru. (CCTV Works)
IP DOME CAMERAS-Supplying, installation, testing and commissioning of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]...
IP BULLET CAMERAS-Supplying, installation, testing and commissioning of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IR...
Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required including cost of all materials, Loading and unloading, labour charges, with ...
Supply, Installtion, Testing and Comissioning of SIP mini intercom is designed for indoor scenes, integrated 16 Port L2 Managed PoE with Built-in 1W speaker and Acoustic Echo Canceller (AEC) and Supp...
Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr
Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required including cost of all materials, Loading and unloading, labour cha...
Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., including cost of all materials, Loading and unloading, labour charges, with ...
Supplying and drawing UTP-CAT 6E LAN cable
Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...
Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel
Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth
Repairs to Govt. Nature & Yoga Cure Medical College & Hospital Building, K.R.S Road, Mysuru. (Electrical Works)
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due
groove cutting in Brick/C.C wall, including necessary rawl plugs,
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due
groove cutting in Brick/C.C wall, including necessary rawl plugs,
Supplying and fixing surface/flush mounting unbreakable PVC
modular box suitable for mounting modular switch plates with due
groove cutting in Brick/C.C wall, including necessary rawl plugs,
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket
Supplying PVC flexible conduit pipe .... mm dia fixing on surfaceover inverted tapered wooden plugs or phill plugs or rawl plugs andclamped using heavy gauge saddles at an interval of 300 mm using NFs...
Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cuttin...
Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cuttin...
Supplying and fixing of PVC casing and capping on the wall or ceiling
using necessary materials like bends, junction box, elbows, screws at
an interval of 300 mm as required. 25 mm
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...
Supplying, fixing and wiring Residual current circuit breaker (RCCB)
240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V...
Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has...
Supplying of .. TR Invertor type split Air conditioners suitable for
operation on A/C supply single phase 50 Hz 230 V with hermetically
sealed inverter compressor with air cooled condenser, latest R41...
Installation charges for split type air conditioner with allied works for
one indoor and one outdoor unit is to be mounted on suitable Angle
Iron support upto 3.0 Ton split/cassette type A/C.
Supplying and installation of insulated refrigerant copper tubing of
5/8" and 3/8" with polythene foam insulation 3 core 80 stand
copper wiring between indoor and outdoor unit Leak testing oil
Supplying, erecting, testing and commissioning of voltage stabilizer
suitable for 170 to 270 v input and load variation from no load to full
load, with over load protection, spike suppression, operati...
Supplying of recess mounting non integral type ........ LED w
luminaire comprising of pressure decast/extruded aluminium housing,
with spring loaded false ceiling clamps, Power LEDs with CCT 6500
Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per watt, lifegrea...
Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70%. efficacy greater than80 lumen per watt, lifegrea...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades
suitable to operate on 230V 50Hz, AC Supply complete.-12" Sweep (300 mm)
Supplying capacitor type ceiling fan complete with down rod
blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...
Supplying wall mounting fan suitable to operate at single- phase
230v AC. supply. 400 mm Sweep
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-3 -1995- O.doc
Tender Document • 1.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .