SPECIAL REPAIR SIGNAL CENTER AT GRD, BLDG NO P 10 1 TO 04 AT NCC PROVN OF TOILET AT NCC AND KOTA STONE FLOORING IN COOK HOUSE AT GRD UNDER GE AF GORAKHPUR

Amount

Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters. complete all as specified as directed.

Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.

M&L for 15 mm thick cement plaster in cement mortar 1:4 mixed with WPC @ 150 ml per bag of cement or as per manufacturer instruction finished the surface even and smooth without using extra cement, complete all as specified and directed. ( Note: WPC will be measured and paid separately)

M&L for 15 mm thick cement plaster in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished even and smooth without using extra cement

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in two layers of 10+5 mm in CM 1:4 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture @200ml/bag over two coats of super latex 302 of dr fixit or equivalent in the ratio (1:4:7),(one part super latex,4part water and 7 parts of cement ) @ 1.5 kg of homogeneous mixture/ Sqm in two coats and finish the surface even and smooth without using extra cement ) for external walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

M & L for Taking down cement plaster any description on brick or concrete walls, etc including raking out joints, hacking for key scrubbing down with water etc Rendering 15mm thick in CM 1:6 mixing with pidi Proof 101 LW (+) of Dr fixit or equivalent integral water proofing admixture @200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7),(one part super latex, 4part water and 7 parts of cement ) @ 1.5 kg of homogeneous mixture/ Sqm in two coats and finish the surface even and smooth without using extra cement ) for walls complete as per specification and directed ( Pidi proof and super latex to be measured and paid separately)

Supply only Pidi proof 101 LW(+) complete all as spfd and directed.

Supply only Super latex 302 complete all as spfd and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Preparation of new plaster surfaces of wall and applying two coats of distemper oil emulsion over a coat of white cement primer complete all as specified as directed.

M&L for preparation of newly plastered of surface of wall, concrete and applying three coat of white wash on ceiling and wall surface incl complete.

Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of distemper oil emulsion complete all as specified as directed.

M&L for preparation of old surface and two coat of white wash on old ceiling surface incl complete.

Preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified as directed.

Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of cement base paint over a coat primer complete all as specified as directed.

Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as spfd and directed..

M&L 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in Sub base, hard standing, plinth protection etc finished the surface even & smooth without using extra cement.

M&L for precast designer chequered tiles rubber moulded (factory made rectified) of size tiles 300mX300mmX25mm,top layer glazed made in any type of cement and pigment in required patterns(compressive strength not less than250 kg per Sqm) including 20 mm 1:6 Screed bed.

M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggt) as in coping and similar works incl necessary from work all as specified.

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface channel and drain complete all as spfd and directed.

Demolition of brickwork and portions ordered to be dismantled built in cement mortar or cement lime mortar complete all as specified as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in CM 1:4 complete all as specified as directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified as directed.

S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified as directed.

S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as spfd and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as spfd and directed.

S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as spfd and directed.

S&F 20 mm dia gun - metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as spfd and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580X 440mm white with integral foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F vitreous china squatting pan Orissa pattern size 580X 440mm white with integral foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs 10 Liter capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F vitreous China wash basin white Angle back size 400mmx 400mm including brackets, brass chromium plated waste fittings and PVC waste pipe including cutting for and pinning in ends of bracket & waste pipe fixed in repairs. complete all as specified as directed.

S&F in repairs for 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.

S&F 15 mm bore pillar taps CP fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed.

S&F in repair brass chromium plated concealed valve of 15 mm bore complete all as specified and directed.

S&F in repair brass chromium plated angle stop cock, of 15 mm bore complete all as specified and directed.

S&Fin repair CP bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm bore complete.

S&F CP bib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm bore complete.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as spfd and directed.

S&F angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd and directed.

S&F in repairs CP Grating doom 125 mm dia with waste hole complete all as specified as directed.

S&F CP Grating doom 125 mm dia with waste hole complete all as specified as directed.

S&F in repair Stainless steel kitchen plate rack of size 600x900x250 of best quality ISI marked made out of 1.0 mm thick Stainless steel fixed with Nails complete all as specified and directed.

S&F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick, coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160 mm complete all as directed . Make- Nirali or equivalent.

S&F in repairs Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass crews and wooden/plastic cleats (Minimum weight 170gms)

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass crews and wooden/plastic cleats (Minimum weight 170gms)

S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grams including arm 15 mm size 195mm long with bend min weight 40 grams complete all as specified.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S&F PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete all as specified and directed.

S& F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as spfd and directed.

S&F in reapirs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as spfd and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as spfd and directed.

S&F in reapirs 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement. complete all as spfd and directed.

S&F 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all as spfd and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) bends any radius complete all as spfd and directed.

S&F PVC waste pipe 40mm dia for sink ISI marked complete all as spfd and directed.

S&F PVC waste pipe 32mm dia for wash basin ISI marked complete all as spfd and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as spfd and directed.

S&F in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as spfd and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as spfd and directed.

S&F 110mm PVC (SWR) bends any radius complete all as spfd and directed.

S & F in Repair 110 mm PVC (SWR) vent cowl complete all as spfd and directed.

S &F in repair 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, in any position.

S &F in repair 75 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, in any position.

S& F in Repair 100 mm cost iron Bends (any radius) with duck's foot or heel rest.

S& F in Repair 75 mm cost iron Bends (any radius) with duck's foot or heel rest.

S& F in Repair 100 mm cost iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth;and getting out any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm

Removing surplus excavate soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

Demolition and breaking up 150mm dia salt glazed stone ware drain pipes jointed in cement mortar and taking out of trenches removing the debries from site complete all as specified and as directed by Engineer-in-Charge.

M&L for RCC pipe of class NP 2 of 1500 mm drain pipe laid in trenches and jointed all as specified (internal dia of pipe 150 mm bore pipe) complete all as specified.

M&Lfor 100 mm thick PCC (1:4:8) type D2 ( using 40mm graded stone aggregate ) as in the drain pipe incl packing under & haunching against the side of pipe after they are laid and tested for 150mm dia compelete all as specified.

M&L Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4

Material and labour for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation: - (a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately). (b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformly complete all as specified & directed. (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer. (d) Over hot bitumen laying polymeric water proofing membrane consisting of 90-to-100-micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed. (d) Over hot bitumen laying polymeric water proofing membrane consisting of 90-to-100-micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed at site. (e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm.

M&L 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe.

Material and labour PCC in foundation filling and mass concrete type E-2, 1:5:10, using 40mm graded aggregate all as specified and directed by Engineer In Charge

M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 12.50 mm graded stone aggregate) as in sub bases of floors finished even and fair.

Demolition of brick tiles flat or edges pointed in any type of mortar complete all as specified and directed.

Dismantling/Demolition /striping out of existing roof treatment (tar felt and roof plaster etc) including PCC padding of any description and any thickness including backing and removal the debris complete all as specified and directed.

M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed.

M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately)

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded and pointed in any mortar all as specified.

M&L machine cut kota stone slab flooring 18-20 mm thick over 20mm thick (1:6) cement screed bad laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Ditto but as in riser of steps, skirting, dado and pillar laid over 15mm tick cement plaster in CM 1:4.

S&F 18-20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete reinforced including roof padding, Rcc Tank etc complete all as specified and directed.

M&L for RCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work in bldg up to 6M height incl use and waste of necessary formwork and scaffolding required

M&L for providing pre-cast RCC lintel, shelves etc type B-1 ,1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4 for door and window opening including use and waste of form work complete.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O use in reinforcement as well as in strrips.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.

Ditto but as in skirting over 10 mm thick cement morter in 1:4

S&F joint free nonskid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n. exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete.

S&F Glazed ceramic coloured tiles 300x450x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick cement plaster in cm 1:4 complete all as specified as directed..

Taking down chowkats or frame not exc 1.5 sqm with shutter (without taking of shutter from frame) all as specified and removing from site.

Ditto but exe 1.5sqm and n.exe 4 sqm

Taking down shutters of any description exc. 1 Sqm But n. exc. 2 Sqm

S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

S & F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed.

M&L for PCC 1:3:6 type C1 as in hold fast block and filling in pressed steel frame incl. Necessary form work

S/F 35mm thick factory made plain framed, paneled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kiln seasoned and chemically pressure treated.

S&F for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S& F in repair Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lasmination & other side balancing white lamination in pelmet boxes, cupboard shutters etc, rebated or flat edged fixed in repairs complete all as specified as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg.

M & L powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size 92 X 29.5 X 2mm thick and shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless-steel wire staples. Complete all as specified and directed.

S&F in repair 18 mm thick Rajshri PVC Celuka ply of grade1 quality (or equivalent PVC ply of other make as approved by GE) of both side prelem fixed with screws, solvent cement/adhesive to make cupboard shutter sides top and bottom, shelves inside the cabinet and shutter or drawer complete all as specified and dfirected.

M&Lin repair made PVC shelf/partition of required size consisting of panel of 18 mm thick Celuka PVC ply of make Rajshree (or equivalent PVC ply of other make as approved by GE) and supporting the shelf/partition and shall provide with PVC runners in three sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed.

S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make- KAFF complete all as specified.

S&F stainless steel handles of 100 mm size for kitchen cabinet shutter complete all as specified.

S&F 75mm Hasp and staple, aluminium anodised, wire type, stove enameled black, including bolt to hinge plate and fixed with screws

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless-steel wire staples. Complete all as specified and directed.

S&F in repair curtain rod (Drapery rod) plastic coated 20 mm dia including end Knobs fancy type nickel polished golden or silver colour as per sample. Complete all as specified as directed.

S&F in repairs fancy type brackets for fixing of 20mm dia dropery rod complete all as specified and directed.

S&F in repairs Cloth rod with caps and brackets 15 mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for windows grill etc.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type of door and window stopper including all necessary articles n. exc. 200 cu. cm each each all specified.

M&L preparation of new wooden surface any description not otherwise described and exc. 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 75 mm size butt hinges medium weight cold rolled milled steel all as specified.

S&F 100mm size butt hinges medium weight cold rolled milled steel all as specified.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete.

Ditto, but 150mm long.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for 125mm size Aluminium handle cast type anodiesd complete all as specified as directed.

Detto but 150mm size

M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as directed

M/L preparing old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

S& F in Repair Providing precast cement concrete louvres Type B0 1:2:4 (12.5mm stone agg) Set in cement mortar 1:4 and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) .

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete.

M&L Providing ATT and injecting chemical emulsion for Post Constructional Anti Termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc. in apron

Removal of demolished materials to Outside of MOD land.

M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence: - (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.5 Kg/Sqm (III) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed. (iv) Applying bitumen primer paint 0.25kg/Sqm over polymeric membrane. (v) Spreading of clean washed sand @ 1Kg/Sqm over bitumen primer as applied above to make a bond between screed bed and membrane. (vi) applying PCC tiles 20Cmx20cm x20mm Concrete tile with 15 mm Screed bed in CM 1:4 mix with 5% of liquid WPC included WPC qty measure Separately, complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation , etc.) or insulation boards/ slabs/ blankets any thickness including cover fillets.

S & F Anodised alluminium snap grid frame work size 605x605mm for fall ceiling all as specified.

M & L for 4 mm thick Non asbestos fiber cement building boards fixed or laid/ inserted to timber/ GI/ aluminium frame, fixed in ceiling.

S/F 2nd class hard wood plain , solid straight chowkats and frames , wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

M&L anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm , incl necessary aluminium fittings like aluminium butt hinges 06 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 5 mm ACP sheet in lower panel and 5 mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

S&F in repairs fancy Knob for fixing of 20 mm dia drapery rod complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil.

M&L Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

M&L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in foundations, footing, plinth beams, bases for columns and mass concrete complete including necessary use and waste of formwork complete (reinforcement to be measured separately).

M&L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in columns, pillars, posts & struts including necessary use and waste of formwork complete (reinforcement to be measured separately).

M&L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels over 1.5m clear span, beams and cantilevers including necessary use and waste of formwork complete (reinforcement to be measured separately).

M&L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in slabs supported on walls, beams & columns including necessary use and waste of formwork complete (reinforcement to be measured separately).

M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed

S & F Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreader complete.

Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete all as specified and directed.

S & F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completes all as specified

M&L 50 mm thick PCC type B1- 1:3:6 (using 20 mm graded aggt) in sub base.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures (DBs, submain, cables etc) and making good disturbed surfaces of wall, floor etc and matching with original colour of wall, complete, all as specified & directed.

Taking down & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of thickness 1.6mm thick terminal boxes concealed on wall/floor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hilum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash all as specified and as directed by Engineer- in- Charge.

All as per item No 170 above but 5 Amp socket outlet, independent.

All as per item No 170 above but on the same board.

All as per item No 170 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 Sqmm size cable.

All as per item No 170 above but one light point controlled by two no 2-way switch complete all as spfd.

All as per item No 170 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F switch piano flush type 5 Amp one-way, single pole, 240 volts all as specified.

S&F switch piano flush type 5 Amp 2 way, single pole, 240 volts all as specified.

S&F socket outlet 5 Amp, 5 Pin, 240-volt, flush type, all as specified and directed.

S&F switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, all as specified.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified

S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep. Make:- Anchor/SSK/Bajaj.

Supply & Fix in repairs bldg. security light LED 40 /45 watt bldg. security light , environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP66 luminaire with PC housing in opal finish suitable for Bldg security with high brightness complete all as specified and directed. Make SSK-SLF-CF-40W of Syska or equivalent Havells/Crompton

S & F in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make -SSK-RA1801 of Syska or equivalent Havells/Crompton

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.

Supply and fix in repairs Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed.

Supply and fixing in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as directed.

S&F (in repairs) Distribution Board TPN with and including of DPX MCCB 35 KA 160 Amps MCCB FP, as incomer and SP/TPN MCBs as outgoing protection class IP 54, 4 way (DPX 160+24) with metal door double door Cat No 6079143 of Legrand or equivalent other specified Make.(Note :- FP MCCBs 35 KA 160 Amps 1 No and 24 Nos MCB SP 32 Amps 230 Volts and Blanking plate shall be measured and paid under this this item )

Taking down existing ceiling fans of any capacity/make and rehanging after necessary servicing/overhauling up to satisfactory working at suitable RPM including painting with two coats of white synthetic enamelled paint and marking of MES no on it and making necessary electric connection with three core PVC insulated copper conductor cable complete all as spfd and directed.

M&L for renewal of earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protection pipe 15mm bore up to main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and completion.

M&L in repairs sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 4 Sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit all as specified.

M&L in repairs sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 6 Sqmm including 6 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit all as specified.

Supply and fix Exhaust Fan 450 mm dia, Single Phase 230 Volts AC including lower shutter and all connection complete all as specified and directed by Engr-in-Charge Make - Bajaj/Havells/Usha

Supply and fixing LED tube light along with fixture including one number of 09 watt 2' LED tube with copper flexible flat twin core cable for connection complete all as directed by Engr-in-Charge.

Supply and fixing LED bulk head light fitting along with fixture including one number of 10 watt LED with copper flexible flat twin core cable for connection complete all as directed by Engr-in-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable heavy duty 1100 volt grade with stranded aluminium conductor cable of size 6 sqmm 2 core compete all as spfd.

Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wiring including suitable concealed pressed steel box 175mm x100 mmx60mm with BL sheet connecting of electric connection all as specified and directed by Engr-in-charge.

S&F bell push piano type, single pole 1 way 240 volt, all as specified.

Fixing only in Replacement lamp holder Bakelite with back plate suitable for batten fittings all as specified

Fixing only in Replacement of ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep. Make:- Anchor/SSK/Bajaj.

Fixing only in Replacement of switch/socket piano flush type 5 Amp one way, single pole, 240 volts all as specified.

Fixing only in Replacement switch piano type 5 Amp, 2 way, 240 volts all as specified.

Fixing only in Replacement of switch socket outlet, two in one 5 & 15 Amp, 6 pin, multipurpose combination, all as specified.

Fixing only in Replacement of ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified

supply and fixing of pressed steel terminal box of size 9X11 mm for mounting of switch socket of thickness 1.6 mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash all as specified and as directed by Engineer- in- Charge.

supply and fixing of pressed steel terminal box of size 8 X4 mm for mounting of switch socket of thickness 1.6 mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash all as specified and as directed by Engineer- in- Charge.

Supply and fix Ceiling fan 1200 mm sweep 230V AC single Phase including down rod and electric connections all as specified and directed by Engr-in-Charge Make - Usha/Bajaj/Khaitan

M/S SHAILZA TRADERS

sri krishna construction

JYOT BUILDERS

M/S SHRI RC YADAV

M/s Rajmani Engineers

PANKAJ AND BROTHERS

Sheo Prasad