Construction of Hut/Gajebo, Ram and Laxman and Sabri Statue at Nagarpalika Area Pirawa, District Jhalawar

Amount

NON BSR ITEM

Construction of Hut/Gazebo/ as per following and enclosed photograph circular platform at ground level goving overall dia not less then 4.60 mtr with 1.5 mtr. Width in annular shape footpath- plinth level area 17 sqm (Dai of circular platform not less than4.66 mtr) plinth height 0.60 mtr From Ground level shouldbe in three Equal steps having rise 15 cm with on side gentle slope ramp having width 1.0 ma and with and with side relines 1st roof level height should be not less than 3 mtr from plinth level total covered area of 1st roof level not less than 21.50 sqm- Roof should he made in frustum of cone shape having frustum height 0.60 mtr and thickness of roof slab should not be less than0.125 mtr 2nd roof should be made not less than 2.0 mtr dia at Bottom with 0.60 mtr cone °eight at centre difference of level between both roof should be riot less than 1 mtr with 6 floc RCC (m-20) circular column giving dia 0.23 mtr with required reinforcement from plinth level of support 1st roof level having load bearing capacity of both roofs with required foundation the but should be facilitated with 12 No. Round sitting bench of 0.45 mtr width and 0.10 mtr thick should be made in RCC of M-20 RCC work should be complete in M-20 with required reinforcement (Not less than minimum) as per relevant look of wooden finishing with ornamental plaster in rich mortar using while cement oxide colour and bamboo/Ball Design with Flanl finished in touchwood colour (two or more coats) as per photograph enclosed with giving aesthetic look . The job work should be complete as per direction of engineer in charge and up to satisfaction of engineer.(as per Drawings)

Making of railing as per following Speciation design 2. Nos. vertical pole should be made in 1 0 mtr Distance & 1.0 Mtr. Height and also of 3" thickness. 2 Nos. cross pole should be made per above specification.1 Nos. horizontal pole should be use made on top side as per above specification3 Nos. 8mm size bars should be use every pole with 6 nos. rings of 4m. G.I. Wire. The Stainless steel Murga Jhali should be fixed with every pole for C.C. Work. All poles should be complete by 1:1:2 R.C.C. Mixture The Plaster work should be complete by 1:2 mortar of not less than 12 mm thick. Finishing work should be complete by white cement oxide colours as per direction & made the pillar in Bally or Bamboo design or as per direction after finishing work should be done two coats of touch wood. Work should be done as per direction of incharge

Constructions of Saabri Ramji scene where Ramji and laxmanji reached at saabri’s house and saabri offered him to jujube. The scene will be recreated in statue of Sabri Ramji and Laxmanji as per drawings.

Bidder Name

Amount

DB ROYAL CONSTRUCTIONS (GSTN-08AAKFD9839Q1ZD) BID ID -3074724

M/s R. K. Engineers (GSTN-NA) BID ID -3074738

DB ROYAL CONSTRUCTIONS (BID ID -3074724)

DB ROYAL CONSTRUCTIONS (BID ID -3074724)