Providing and placing 3 Nos portable cabin at Mungoli OC Mine under Mungoli Sub Area.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA) upto 20%.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand).

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing portable office cabin of dimension 10' * 10' * 8.6' including cost of transportation, loading ,unloading carriage , labour etc as detailed below as per instruction of EIC Bottom frame : 100x50 mm thick MS I Channel Top Frame : 50x50mm 2mm thick MS Specially Formed pipe Stiffener Bottom : 100 x 50 mm x 3mm Rectangular Pipes, & 40 x 20 x 2mm thick Stiffener Top :Specially Formed MS Sections Combination of 1.mm Side wall stiffeners : 1.mm thick MS - Specially formed Channels Paneling Outside : 1.mm thick GI – Specially Formed Grooved Sheet Internal wall paneling : 8mm Prelaminated MDF Board indise Wall. Roof outside : 1.mm thick GI - Specially Grooved Sheet - Properly Sloped and water tight False ceiling : 8mm Prelaminated MDF Board. Bottom flooring : 18mm Cement Bonded Fiber Board(100% Water , Termite & Dimensional proof) with 1mm Vinyl Carpet Aluminum windows Double Shutter Sliding Aluminium Powder Coated Windows– 4mm Tinted Gray Glass with Safety Grills Door : Constructed of Rigid Steel Frame and Door Closer, Aldrop & Handles. Door Frame 1.6mm thick & Door 1.2mm thick Insulation : Glass Wool density of 48kg/m3 Rocks Wool Insulation – (Side Wall- 25mm), (Ceiling 25mm) Wiring : All wiring shall be concealed type & shall be of PVC insulated copper wire (FR grade) of ISI – POLYCAB MAKE Electrical fittings : AC 50Hz Tubelights , Door Light , Fan, Switches & Sockets, Air Conditioners Point, ELCB At the INPUT JUNCTION for Earthing : Earthing Point shall be provided for SAFETY Outside painting : Phosphate the Cabin and painting with coat of Epoxy primer with Two Coat of Enamal Paint. Legs : 80 x 80 x 150mm Four legs at all four corners Hooks : Specially formed Hooks for Easy lifting and Shifting Partition wall (optional) : 1.2mm thick Specially Formed Galvanized Channels with 7.5mm MDF BSL Sheet Furnitures : All furniture made in 12mm Prelamineted Partical Board.