Repair/ Replacement of Plastering, Flooring, joinery and connected B/R Items in OTM Accn Zone A and Periodical services to OTM Accn in New Cantt Zone A at Mil Stn Patiala under GE (South) Patiala

Amount

Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer-in-Charge.

Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer-in-Charge.

Taking down wooden shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer-in-Charge.

S&F Pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Description all as per serial item No 4 here-in-before but size 105 x 60mm complete all as specified and directed.

M&L For Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in mass concrete or filling backs of chowkats complete all as specified and as directed by Engineer in charge.

Factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S&F Anodised aluminium window and ventilator shutters fixed type without sash bar, powder coating of any colour ( thickness of powder not less than 50 microns). Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed

Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rails, 114.3x44.45x1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/ lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf.

S&F in repair Aluminium tower bolt 200mm long Add and fixed complete all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repair Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.

S&F in repair Floor door stopper 150 mm long of aluminium alloy body and toungue anodised with hard drawn steel spring fixed in floors complete all as specified and directed .

S&F in repair Aluminium handles of size 150mm oval typecast type anodised complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conformint to Fe-410 W

S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S& F.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F 100 mm size PVC butt hinges all as specified and directed.

S&F 125 mm PVC handles all as specified and directed .

S&F 200 mm long PVC tower bolt all as pecified and directed .

M&L For Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete. as approved by GE Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

Taking down old unserviceable wire cloth any size from wooden/ metal frames complete all as specified and as directed .

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples incl replacement of second class wooden beading where ever reqd complete all as specified & as directed.

Hacking out old broken glass (any thickness , size , quality or description) from wooden or metal frames glazed with oil putty or fixed with beads

S&F Sheet glass ordinary quality 4 mm thick not exe.0.50 sqm glazing with oil putty or fixed with wooden beads in squares any size of pane complete all as specified & as directed.

Description all as per serial item No 37 here-in-before but 4mm thick frosted glass complete all as specified and directed.

S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified & as directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n'exec 150 cm thick (above or below ground level) complete all as specified and directed.

Demolition of re-inforced cement concrete of any description and in any position incl cutting of re-inforcement to facilitate demolition where ever reqd complete all as specified and directed.

M&L for Machine cut Mirror polished Kota stone 20mm (+2mm) thick slab as in cooking platforms/ landings, treads and risers of stairs and steps laid over and including screed bed or 15mm th bedding layer in cement mortar 1:3 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing and treating the surface with beeswax polish complete all as specified and directed.

M&L for Machine cut Mirror polished Kota stone slab flooring 20mm (+2mm) thick laid over and including 20mm screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing and treating the surface with beeswax polish complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking plateforms & other similar situations complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Providing and Laying ceramic glossy finish, joint free premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid premium (1st) quality ceramic coloured tiles 400 X 400 mm and 7-8 mm thick joint free, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

Providing and Laying Premium (1st quality) straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x600x 9 to 10mm thick in floors etc in approved shade, set & jointed in neat cement including and over 15mm in screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engr-in- Charge.

M&L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) 25 mm thick to receive the floor tiles.

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 using WPC on fair faces of brick or concrete surfaces on walls etc., finished even and fair without using extra cement, complete all as specified and directed. Note: - Supply only WPC Shall be measured separately & paid for accordingly & shall be provided @ 3% by weight of cement or as per manufacturers instructions as directed by Engineer in Charge

Supply only Liquid waterproofing compound

M&L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc., finished even and smooth without using extra cement, complete all as specified and directed.

Dubbing out average 15 mm thick in cement mortar 1:4 on irregular faces of walls, ceiling & chhajjas incl removing carefully old damaged loose concrete from RCC / PCC surfaces of ceiling/ Chhajjas for double storey bldgs complete all as specified and as directed by Engineer incharge.

M&L for Rendering 10mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling/ Chhajjas finished even and smooth without using extra cement all as specified.

Preparation of new / old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting priming paint complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of ceiling etc., and applying three coat of lime white wash on ceiling surfaces all as specified.

Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of cement base paint over a coat of Alkli Resistance priming paint (as primer) complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth with using extra cementcomplete all as specifiedand as directed.

M&L Glass dividing strips 38 mm wide and 3mm thick laid and fixed in position for laying floor finishes complete all as specified and directed.

M&L for RCC 1:2:4 type B-0 (12.5mm graded agg) as in shelves/ chajjas etc complete all as specified and directed.

M&L for TMT bars of 6 to 8mm dia cut to length bent to shape required and binding with and incl MS (annelead) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

S&F wire mesh netting (Size of Mesh 20mm) of galvanised steel wire 0.71 mm dia fixed with tinned tacks or wire stapples or with PVC rawl plugs & 20mm long steel screws for repairs to ceilings/ Chhajjas/ other RCC surfaces & walls etc., prior to giving dubbing coat or any other treatment all as directed by Engineer incharge

Form work to soffits & sides of shelves/ Chhajjas and the like fair finished complete all as specified.

M&L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in roof kerbs, PCC Khurras, coping on parapet wall, mud stops, steps small sumps and like items slightly rounded or chamfered on the edges all as directed by Engr-In-charge

Racking out joints , hacking for key incl removal of all grass, vegetation growth from roofs etc., and M & L for flush pointing to roof tiles/ terracing in cement mortar 1:3 complete all as specified and directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

M&L 50mm thick PCC (1:3:6) type C2 (using 40mm grade aggregate) as in plinth protection, finishing the surfaces even & smooth w/o using extra cement.

M&L 75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base under floors etc complete all as specified and as directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling timber scantlings in framed work 40 sq. cm and over in section, in any position

S&F Anodised aluminium snap grid Size of size 605 x 605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in Charge.

Material & labour for Gypsum Board 600mmx 600mm x 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in Charge.

S&F for hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F in repair PVC (SWR) pipe110 mm bore Rain water pipe single socketed in any length with rubber ring joints, fixed to wall incl Tacking Down

Complete removal of existing treatment of any type/description such as cement base paint, external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.

Applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-Charge.

Writing letter of figures (block, roman italic or Indian) n exc 30cm high complete all and the colour of paint and dimension of letter to be used as approved by Engr-In-Charge.

Writing stops , commas, short lines, dashes, hypens, brackets etc and the colour of paint and dimension of letter to be used as approved by Engr-In-Charge.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for cement plastering 5mm thick in(Small Patches) cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

Applying acrylic thick wall care putty on internal surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L For preparing existing old treated surface of external Walls/RCC Surfaces/Soffits of Chajjas/Roof Projection/Centilevers/Balcony etc Incl Cornices and applying one coat of Cement base paint @5Sqm/KG/1 Coat by using of cement based paint by roller complete all as specified & directed by Engr-in-charge,

M&L For preparing existing old treated surface of external Walls/RCC Surfaces/Soffits of Chajjas/Roof Projection/Centilevers/Balcony etc Incl Cornices and applying Two coat of Cement base paint @5Sqm/KG/1 Coat by using of cement based paint by roller complete all as specified & directed by Engr-in-charge,

M&L for prepration of old plastered surface/unplastered Surfaces including washing, rubbing down and stoping of Distempered and painted surfaces and applying Two coat of Oil Bound Distemper on wall completed all as specified and directed

M&L for prepration of old plastered surface/unplastered Surfaces including washing, rubbing down and stoping of Distempered and painted surfaces and applying one coat of Oil Bound Distemper on Wall completed all as specified and directed

M&L for preparing existing treated surfaces on Wall including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing existing treated surfaces on Wall including cornices and applying Two coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing existing treated surfaces on ceiling including cornices and applying Two coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

FAVOURITE ENGINEERS

m/s panchmukhi builders

SWAMI ENGINEERS

RUPINDER SINGH SODHI

Arneja Builders

Buttar Construction Co.