Electrification of Laundry,Boiler House and other Electrical works at sub District Hospital at zainpora shopian.

Amount

Provididng and fixing of 8 meters long Steel Tubular poles SP 15 poles duly swedged duly painted in silver colour for street lighting at site.

Providing and fixing of single brackets made out of 2inch dia MS pipe for holding of lights as per drawing.

Providing and fixing of flood lights of 70watts LED (jaguar/philips/Bajaj.

providing and fixing of concerete bottom 1.5 feet deep and 1.5 feet above from the ground level with 1.5 feet dia. In 1:3:6 concerete for ST poles

providing and fixing of MS pole box duly painted including connector, with hindges and knob.

providing and fixing of MS clamps to hold pole box on poles.

Providing and fixing of single pole MCB in pole box

Providning and fixing of GI pipe 25mm dia class B for cable entry from pole bottom to pole box including GI bends of 1.25 mtrs height

Providing and fixing of 2"dia G.I pipe for cross roads.

providing and fixing of 2.5 mmsq cu wire pvc insulated for light fixture to pole box.

providing and laying of G.I wire 8 SWG for earthing of poles

Providing earthing stations at locations as called for with 600 x 600 x 6 mm, thick G. I. electrode and the mixture of Charcoal and salt around plate electrode complete

Supply of 900 RPM 450mm Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers,shutters etc complete as requiredExhaust fan 450 mm size industrial type

Supply of integral LED 4ft luminarie with extruded aluminium housing with PC cover. The luminarie should have a color consistency SDCM<5, CRI>80 and CCT of 4000/6500K. The luminarie shall be compilant with IP20 classification.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, LT distribution board, 415 V, on surface/ recess/on stand complete with Aluminum bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)(5 nos) (OUT DOOR TYPE)

Providing and fixing of 32mmx6mm angle iron duly welded,to be used as stand for above panels complete

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

MCCB 4 pole 250 amps 25 KA Legrand/Hager/ABB

MCCB 4 pole 160amps 25 KA Legrand/Hager/ABB

MCCB 100AMPS 4 Pole

MCCB 63AMPS 4 Pole

P/F of Timmer relay Multi Time Delay

Supply of multi core, stranded / solid aluminum conductor, XLPE / PVC insulated armoured, PVC outter sheathed 1100V, grade cables of the following sizes. ( Cable shall be suitable for -15ºC to + 50ºC temprature condition )

3.5 core 240mmsq

3.5c * 150sqmm Al, XLPE, arm

3.5c * 95sqmm Al, XLPE, arm

3.5c * 70sqmm Al, XLPE, arm

3.5c * 50sqmm Al, XLPE, arm

2c 16sqmm Al,XLPE,arm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 25 / 40x3mm MS flat clamp)

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same

25mm dia

32mm dia

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar,neutral link, earth bar, din bar, detachable gland plate interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator) (4 way TPN)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole 32 amps

four pole 63 amps

M/S IMPEL ENGINEERS AND CONTRACTORS

M/S BHAT ENTERPRISES